Solid-phase microextraction/gas chromatography–mass spectrometry method optimization for characterization of surface adsorption forces of nanoparticles

A complete characterization of the different physico-chemical properties of nanoparticles (NPs) is necessary for the evaluation of their impact on health and environment. Among these properties, the surface characterization of the nanomaterial is the least developed and in many cases limited to the measurement of surface composition and zetapotential. The biological surface adsorption index approach (BSAI) for characterization of surface adsorption properties of NPs has recently been introduced (Xia et al. Nat Nanotechnol 5:671–675, 2010; Xia et al. ACS Nano 5(11):9074–9081, 2011). The BSAI approach offers in principle the possibility to characterize the different interaction forces exerted between a NP's surface and an organic—and by extension biological—entity. The present work further develops the BSAI approach and optimizes a solid-phase microextraction gas chromatography–mass spectrometry (SPME/GC-MS) method which, as an outcome, gives a better-defined quantification of the adsorption properties on NPs. We investigated the various aspects of the SPME/GC-MS method, including kinetics of adsorption of probe compounds on SPME fiber, kinetic of adsorption of probe compounds on NP's surface, and optimization of NP's concentration. The optimized conditions were then tested on 33 probe compounds and on Au NPs (15 nm) and SiO₂ NPs (50 nm). The procedure allowed the identification of three compounds adsorbed by silica NPs and nine compounds by Au NPs, with equilibrium times which varied between 30 min and 12 h. Adsorption coefficients of 4.66?±?0.23 and 4.44?±?0.26 were calculated for 1-methylnaphtalene and biphenyl, compared to literature values of 4.89 and 5.18, respectively. The results demonstrated that the detailed optimization of the SPME/GC-MS method under various conditions is a critical factor and a prerequisite to the application of the BSAI approach as a tool to characterize surface adsorption properties of NPs and therefore to draw any further conclusions on their potential impact on health. Graphical Abstract

The basic principle of SPME/GC-MS method for characterization of nanoparticles surface adsorption forces     

Supramolecular Complexes of Multivalent Cholesterol‐Containing Polymers to Solubilize Carbon Nanotubes in Apolar Organic Solvents

Copolymers of 2‐ethylhexyl acrylate (EHA) and cholesteryloxycarbonyl‐2‐hydroxymethacrylate (CEM) were prepared by reversible addition–fragmentation chain‐transfer (RAFT) polymerization. Supramolecular complexes of these copolymers with carbon nanotubes (CNTs) were soluble in THF, toluene, and isooctane. The colloidal solutions remained stable for months without aggregation. The rationale for the choice of CEM was based on the high adsorption energy of cholesterol on the CNT surface, as computed by DFT calculations. Adsorption isotherms were experimentally measured for copolymers of various architectures (statistical, diblock, and star copolymers), thereby demonstrating that 2–5 cholesterol groups were adsorbed per polymer chain. Once the supramolecular complex had dried, the CNTs could be easily resolubilized in isooctane without the need for high‐power sonication and in the absence of added polymer. Analysis by atomic force microscopy (AFM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) indicated that the CNTs were devoid of bundles. The supramolecular complexes could also be employed in an inverse emulsion polymerization of 2‐hydroxyethylmethacrylate (HEMA) in isooctane and dodecane, thereby leading to the formation of a continuous polymeric sheath around the CNTs. Thus, this technique leads to the formation of very stable dispersions in non‐polar organic solvents, without altering the fundamental properties of the CNTs.     

New Luminescent Lanthanide Tetrakis-Complexes NEt4[LnL4] Based on Dimethyl-N-Benzoylamidophosphate

New lanthanide dimethyl-N-benzoylamidophosphate (HL) based tetrakis-complexes NEt₄[LnL₄] (Ln³⁺=La, Nd, Sm, Eu, Gd, Tb, Dy) are reported. The complexes are characterized by means of NMR, IR, absorption, and luminescent spectroscopy as well as by elemental, X-Ray, and thermal gravimetric analyses. The phenyl groups of the four ligands of the complex anion are directed towards one side, while the methoxy groups are directed in the opposite side, which makes the complexes under consideration structurally similar to calixarenes. The effect of changing the alkali metal counterion to the organic cation NEt₄⁺ on the structure and properties of the tetrakis-complex [LnL4]^- is analyzed. The complexes exhibit bright characteristic for respective lanthanides luminescence. Rather high intensity of the band of ⁵D₀→⁷F₄ transition, observed in the luminescence spectrum of NEt₄[EuL₄], is discussed based on theoretical calculations.     

Zn-Induced Interactions Between SARS-CoV-2 orf7a and BST2/Tetherin

We present in this work a first X-ray Absorption Spectroscopy study of the interactions of Zn with human BST2/tetherin and SARS-CoV-2 orf7a proteins as well as with some of their complexes. The analysis of the XANES region of the measured spectra shows that Zn binds to BST2, as well as to orf7a, thus resulting in the formation of BST2-orf7a complexes. This structural information confirms the the conjecture, recently put forward by some of the present Authors, according to which the accessory orf7a (and possibly also orf8) viral protein are capable of interfering with the BST2 antiviral activity. Our explanation for this behavior is that, when BST2 gets in contact with Zn bound to the orf7a Cys₁₅ ligand, it has the ability of displacing the metal owing to the creation of a new disulfide bridge across the two proteins. The formation of this BST2-orf7a complex destabilizes BST2 dimerization, thus impairing the antiviral activity of the latter.     

Color Stabilization of Apulian Red Wines through the Sequential Inoculation of Starmerella bacillaris and Saccharomyces cerevisiae

Mixed fermentation using Starmerella bacillaris and Saccharomyces cerevisiae has gained attention in recent years due to their ability to modulate the qualitative parameters of enological interest, such as the color intensity and stability of wine. In this study, three of the most important red Apulian varieties were fermented through two pure inoculations of Saccharomyces cerevisiae strains or the sequential inoculation of Saccharomyces cerevisiae after 48 h from Starmerella bacillaris. The evolution of anthocyanin profiles and chromatic characteristics were determined in the produced wines at draining off and after 18 months of bottle aging in order to assess the impact of the different fermentation protocols on the potential color stabilization and shelf-life. The chemical composition analysis showed titratable acidity and ethanol content exhibiting marked differences among wines after fermentation and aging. The 48 h inoculation delay produced wines with higher values of color intensity and color stability. This was ascribed to the increased presence of compounds, such as stable A-type vitisins and reddish/violet ethylidene-bridge flavonol-anthocyanin adducts, in the mixed fermentation. Our results proved that the sequential fermentation of Starmerella bacillaris and Saccharomyces cerevisiae could enhance the chromatic profile as well as the stability of the red wines, thus improving their organoleptic quality.     

Combined Experimental and Multivariate Model Approaches for Glycoalkaloid Quantification in Tomatoes

The intake of tomato glycoalkaloids can exert beneficial effects on human health. For this reason, methods for a rapid quantification of these compounds are required. Most of the methods for α-tomatine and dehydrotomatine quantification are based on chromatographic techniques. However, these techniques require complex and time-consuming sample pre-treatments. In this work, HPLC-ESI-QqQ-MS/MS was used as reference method. Subsequently, multiple linear regression (MLR) and partial least squares regression (PLSR) were employed to create two calibration models for the prediction of the tomatine content from thermogravimetric (TGA) and attenuated total reflectance (ATR) infrared spectroscopy (IR) analyses. These two fast techniques were proven to be suitable and effective in alkaloid quantification (R² = 0.998 and 0.840, respectively), achieving low errors (0.11 and 0.27%, respectively) with the reference technique.     

Generalizations and Properties of the Principal Eigenvalue of Elliptic Operators in Unbounded Domains

Using three different notions of the generalized principal eigenvalue of linear second‐order elliptic operators in unbounded domains, we derive necessary and sufficient conditions for the validity of the maximum principle, as well as for the existence of positive eigenfunctions for the Dirichlet problem. Relations between these principal eigenvalues, their simplicity, and several other properties are further discussed. © 2015 Wiley Periodicals, Inc.     

Synthesis of Highly Functionalized Diaryl Ethers by Copper‐Mediated O‐Arylation of Phenols using Trivalent Arylbismuth Reagents

Highly functionalized diaryl ethers were prepared by copper(II) acetate mediated O‐arylation reaction of phenols using trivalent organobismuthanes. The reaction is performed under simple conditions and tolerates a wide diversity of functional groups on the phenol and on the organobismuth reagent. Substoichiometric amounts of catalyst can be used by performing the reaction under an oxygen atmosphere. The N‐arylation of pyridones is also reported.     

From Enantiopure Hydroxyaldehydes to Complex Heterocyclic Scaffolds: Development of Domino Petasis/Diels–Alder and Cross‐Metathesis/Michael Addition Reactions

One‐step assembly of hexahydroisoindole scaffolds by a sequence that combines the Petasis (borono‐Mannich) and Diels–Alder reactions is described. The unique selectivity observed experimentally was confirmed by quantum calculations. The current method is applicable to a broad range of substrates, including free sugars, and holds significant potential to efficiently and stereoselectively build new heterocyclic structures. This easy and fast entry to functionalized polycyclic compounds can be pursued by further transformations, for example, additional ring closure by a cross‐metathesis/Michael addition domino sequence.