Electrospun superhydrophobic polystyrene hollow fiber as a probe for liquid–liquid microextraction with gas chromatography‐mass spectrometry

A superhydrophobic polystyrene hollow fiber was electrospun around a copper spring collector. This approach led to the construction of a hollow fiber membrane, and the copper spring acted as a scaffold. The characteristic properties of the hollow fiber were studied by scanning electron microscopy. The membrane was used as a probe to transfer the extracting solvent from aquatic media to a gas chromatograph. After performing the liquid–liquid microextraction procedure on 10 mL of water sample by octanol, the whole solution was passed through the prepared polystyrene hollow fiber. Propanol, containing 2 mg/L lindane as the internal standard, was used for desorption and an aliquot of 2 μL of the desorbing solvent was subsequently injected into gas chromatography with mass spectrometry. Effects of different parameters influencing the extraction efficiency were optimized. The limits of detection and quantification were 2 and 6 ng/L, respectively. The relative standard deviations at a concentration level of 100 ng/L were between 2 and 6% (n = 3) while the method linearity ranged from 6 to 200 ng/L. Some real water samples were analyzed by the developed method and relative recoveries were in the range of 76–107%.     

Effect of dimensions of multi-walled carbon nanotubes on its enrichment efficiency of metal ions from environmental waters

The effect of dimensions (length and external diameter) of multi-walled carbon nanotubes (MWCNTs) on its preconcentration efficiency towards some metal ions (Pb²⁺, Cd²⁺, Cu²⁺, Zn²⁺ and MnO₄⁻) from environmental waters prior to their analysis by flame atomic absorption spectroscopy (FAAS) was investigated. MWCNTs (as-received from the manufacturer) of various external diameters and lengths were involved. Other variables optimized included effects of pH of water sample, composition and volume of eluent, mass of the MWCNTs, breakthrough volume and coexisting ions. Maximum recovery of metal ions was obtained at pH 9 where it was thought that precipitation of metals as their hydroxides played the major factor in metals uptake by MWCNT. It was suggested that the use of appropriate dimensions of MWCNTs may support the trapping process of the precipitated metal hydroxides by MWCNTs. It was found that long MWCNT of length 5-15 μm and external diameter 10-30 nm gave the highest enrichment efficiency towards almost all the targeted metal ions. It could be used for preconcentration of MnO₄⁻, Cu²⁺, Zn²⁺ and Pb²⁺ with almost full recovery; but not for Cd²⁺ due to its low recovery. The optimized solid phase extraction (SPE) procedure was capable of determining metal ions in the linear range 20-100 ng mL⁻¹ (except for Zn²⁺ from 20 to 150 ng mL⁻¹). Detection limits were 0.709 ng mL⁻¹ for MnO₄⁻, 0.278 ng mL⁻¹ for Pb²⁺, 0.465 ng mL⁻¹ for Cu²⁺, 0.867 ng mL⁻¹ for Zn²⁺. Application of the optimized SPE procedure to environmental waters (tap water, reservoir water and stream water) gave spike recoveries of the metals in the range of 81-100%.     

Vendor rating for an entrepreneur development programme: a case study using the analytic hierarchy process method

With collaborative purchasing programmes where one of the aims is to develop suppliers, vendor rating is important not only in supplier selection and in deciding how to allocate business but also to determine where scarce development effort is best applied. This paper describes a case study into vendor rating for a government sponsored Entrepreneur Development programme in Malaysia. The paper reviews current methods for vendor rating and finds them wanting. It illustrates a new approach based on the use of Saaty's Analytic Hierarchy process method, which was developed to assist in multi-criteria decision problems. The new method overcomes the difficulties associated with the categorical and simple linear weighted average criteria ranking methods. It provides a more systematic way of deriving the weights to be used and for scoring the performance of vendors.     

Study of Antibacterial and Anticancer Properties of bioAgNPs Synthesized Using Streptomyces sp. PBD-311B and the Application of bioAgNP-CNC/Alg as an Antibacterial Hydrogel Film against P. aeruginosa USM-AR2 and MRSA

Here, we report the extracellular biosynthesis of silver nanoparticles (AgNPs) and determination of their antibacterial and anticancer properties. We also explore the efficacy of bioAgNPs incorporated in cellulose nanocrystals (CNCs) and alginate (Alg) for the formation of an antibacterial hydrogel film. Streptomyces sp. PBD-311B was used for the biosynthesis of AgNPs. The synthesized bioAgNPs were characterized using UV-Vis spectroscopy, TEM, XRD, and FTIR analysis. Then, the bioAgNPs’ antibacterial and anticancer properties were determined using TEMA and cytotoxicity analysis. To form the antibacterial hydrogel film, bioAgNPs were mixed with a CNC and Alg solution and further characterized using FTIR analysis and a disc diffusion test. The average size of the synthesized bioAgNPs is around 69 ± 2 nm with a spherical shape. XRD analysis confirmed the formation of silver nanocrystals. FTIR analysis showed the presence of protein capping at the bioAgNP surface and could be attributed to the extracellular protein binding to bioAgNPs. The MIC value of bioAgNPs against P. aeruginosa USM-AR2 and MRSA was 6.25 mg/mL and 3.13 mg/mL, respectively. In addition, the bioAgNPs displayed cytotoxicity effects against cancer cells (DBTRG-0.5MG and MCF-7) and showed minimal effects against normal cells (SVG-p12 and MCF-10A), conferring selective toxicity. Interestingly, the bioAgNPs still exhibited inhibition activity when incorporated into CNC/Alg, which implies that the hydrogel film has antibacterial properties. It was also found that bioAgNP-CNC/Alg displayed a minimal or slow release of bioAgNPs owing to the intermolecular interaction and the hydrogel’s properties. Overall, bioAgNP-CNC/Alg is a promising antibacterial hydrogel film that showed inhibition against the pathogenic bacteria P. aeruginosa and MRSA and its application can be further evaluated for the inhibition of cancer cells. It showed benefits for surgical resection of a tumor to avoid post-operative wound infection and tumor recurrence at the surgical site.     

In-Vitro Screenings for Biological and Antioxidant Activities of Water Extract from Theobroma cacao L. Pod Husk: Potential Utilization in Foods

Increasing production of cocoa (Theobroma cacao L.) leads to a higher environmental burden due to its solid waste generation. Cocoa pod husk, one of the major solid wastes of cocoa production, contains rich bioactive compounds unveiling its valorization potential. With that in mind, our research aimed to explore the biological and antioxidant activities of aqueous extracts from cocoa pod husks. In this present work, cocoa pod husk was extracted using water and subsequentially partitioned using n-hexane, ethyl acetate, and methanol. The antimicrobial investigation revealed that the ethyl acetate solubles were active against the Staphylococcus aureus, Escherichia coli, and Candida albicans, where at a 20% w/v concentration, the inhibition diameters were 6.62 ± 0.10, 6.52 ± 0.02, and 11.72 ± 0.36 mm, respectively. The extracts were found non-toxic proven by brine shrimp lethality tests against Artemia salina with LC₅₀ scores ranging from 74.1 to 19,054.6 μg/mL. The total phenolic content and total flavonoid content were obtained in the range of 47.44 to 570.44 mg/g GAE and 1.96 to 4.34 mg/g QE, respectively. Antioxidant activities of the obtained extracts were revealed by 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH) assay with EC₅₀ reached as low as 9.61 μg/mL by the ethyl acetate soluble. Phytochemical screening based on gas chromatography—mass spectroscopy analysis on the sample with the highest antioxidant activities revealed the dominant presence of three phytosterols, namely gamma-sitosterol, stigmasterol, and campesterol.     

Detection of glutamate and glutamine (Glx) by turbo spectroscopic imaging

Turbo spectroscopic imaging (TSI) is a spin echo spectroscopic imaging technique in which two or more echoes are acquired per excitation to reduce the acquisition time. The application of TSI has primarily been limited to the detection of uncoupled spins because the signal from coupled spins is modulated as a function of echo time. In this work we demonstrate how the TSI sequence can be modified to observe spins like the C₂ protons of Glx (≈3.75 ppm) which are involved solely in weak-coupling interactions. The technique exploits the chemical shift displacement effect by employing TSI refocusing pulses that have bandwidths which are less than the chemical shift difference between the target spins and the spins to which they are weakly coupled. The modified TSI sequence rewinds the J-evolution of the target protons in the slice of interest independently of the echo time or echo spacing, thereby removing any signal variation between successive echoes (apart from T₂ relaxation effects). In this study we tailored the narrow-bandwidth TSI sequence for observation of the C₂ Glx protons. The echo time was experimentally optimized to minimize signal contamination from myo-inositol, and the efficacy of the method was verified on phantom solutions of Glx and on brain in vivo.     

The Coagulation Impact of 50% Epoxidised Natural Rubber Chain in Ethylene Carbonate-Plasticized Solid Electrolytes

In this research, thin, soft and flexible free standing films can be obtained from poly (methyl methacrylate) (PMMA)/50% epoxidised natural rubber (ENR 50)/lithium triflate (LiCF₃SO₃) blends. However, phase separation is observed on the surface of the films which indicates that the blending is not homogeneous. The blend became more homogeneous when ethylene carbonate (EC) plasticizer is introduced into the blend system. However, the anti-plasticization effect of EC on ENR 50 occurs at lower concentration of EC at which the rubber became coagulated due to immiscibility of the rubber with EC plasticizer during solution casting. These ENR 50 coagulates can be observed as large solid structures in the Field Emission Scanning Electron Microscope (FESEM) micrographs of the EC-plasticized rubber-based electrolytes. The presence of these coagulates, hinder the migration of lithium ions in the system and also trap the lithium ions within the coil. This in turn reduced the number of free lithium ions that contribute to the ionic conduction. As a result, the conductivity of the un-plasticized PMMA/ENR 50/LiCF₃SO₃ film dropped drastically by two orders of magnitude.     

Application of Heteropolyacids as Heterogeneous and Recyclable Catalysts for One-Pot Synthesis of 3-Cyanopyridine Derivatives

A simple, clean and environmentally benign route to the synthesis of 3-cyanopyridines is described via a one-pot multi-component reaction of 3,4-dimethoxyacetophenone, malonitrile or ethylcyanoacetate, aldehyde and ammonium acetate using heteropolyacids as heterogeneous and recyclable catalysts in very good yields.     

Preparation of highly selective solid-phase extractants for Cibacron reactive dyes using molecularly imprinted polymers

Selective polymeric extractants were prepared for preconcentration of Cibacron reactive red dye, a dye that is often applied with Cibacron reactive blue and Cibacron reactive yellow for dyeing of fabrics. The best extractant was fabricated (in chloroform) using methacrylic acid (as monomer), ethylene glycol dimethacrylate (as crosslinker), AIBN (as initiator for polymerization), and red dye as template molecule, with a molar stoichiometric ratio of 8.0:40.0:2.5:0.63, respectively. The structure of the molecularly imprinted polymer (MIP) was robust, and resisted dissolution up to 260 °C. Compared with the un-imprinted polymer, the imprinted product has a large specific surface area which improved its adsorption capacity. The effect of imprinting was obvious from the adsorption capacity measured at pH 4 for red dye (the imprinted molecule), which was increased from 24.0 to 79.3 mg g⁻¹ after imprinting. Equilibrium adsorption studies revealed that the dye-imprinted-polymer enables efficient extraction of red dye even in the presence of blue and yellow dyes which have similar chemical natures to the red dye. The selectivity coefficients S _{red dye/dye}, were 13.9 and 17.1 relative to the yellow and blue dyes, respectively. The MIP was found to be effective for red dye preconcentration, with a preconcentration factor of 100, from tap water and treated textile wastewater. The factors affecting extraction of red dye by the MIP were studied and optimized. Under the optimized extraction conditions, red dye was selectively quantified in the presence of other competing dyes at a concentration of 20 μg L⁻¹ from different water systems with satisfactory recoveries (91–95%) and RSD values (∼5.0%).