Do solid surface potential barriers retard convoy peak electrons?

Using a coaxial cylindric electron spectrometer and an electrostatic ion energy analyzer in tandem, a direct measurement of the difference of the energy of convoy peak electron and the electron equivalent ion energy of protons emerging from the downstream surface of C, Au and Al foils is performed in the proton energy range from 60 to 250 keV. This measurement is made possible using the accepted evidence that for a gas target these energies are equal. It is found that also for the beam foil convoy peak electrons, within an experimental average uncertainty of about ±0.1 eV, there is no difference between these energies. If one accepts that the origin of convoy electrons is from inside the solid, the conclusion is that no retardation by the solid surface potential barrier, which is of the order of a few eV, is observed. This is attributed to the strong electron-ion Coulomb interaction which almost completely overshadows the force exerted on the electron by the field of the surface barrier.     

Comparison of pre-reducing agents for antimony determination by hydride generation atomic fluorescence spectrometry

A systematic study of antimony reduction prior to its determination by hydride generation atomic fluorescence spectrometry (HG-AFS) was carried out. The efficiency of l-cysteine, potassium iodide and potassium iodide/ascorbic acid was studied for this purpose. The hydride generation step was optimised in the presence of those pre-reductors. From the results, l-cysteine was found to be the most suitable pre-reducing agent. Methodology was validated, obtaining detection limits lower than 90 ng l⁻¹ and repeatability and reproducibility better than 3% R.S.D. and 5% R.S.D., respectively, in all cases. In order to evaluate the methodology developed and the influence of the matrix, recovery from waters from different sources was tested by HG-AFS and also by inductively coupled plasma mass spectrometry (ICP-MS). Accuracy was assessed by analysing three water reference materials at different antimony concentration levels. The high sensitivity of the developed methodology enables it to be applied for monitoring drinking waters according to the maximum admissible concentration of antimony established by the EU Directives.     

Enantiomers of sterically hindered n-aryl-4-pyridones: Chromatographic enrichment and thermal interconversion

N-Aryl-4-pyridones 1–6 were synthesized by condensation of the corresponding 4-pyrone with anilines. The enrichment of the enantiomers was achieved by liquid chromatography on triacctylcellulose, enantiomeric purities of(+)-1 and (+ )-2 being measured by ¹H-NMR in the presence of an optically active auxiliary. Barriers to partial rotation about the C-N bond in 1-4 were determined and compared with corresponding biphenyls.     

Investigation of the Declared Value of Selenium in Food Supplements by HG-AFS

The method of hydride generation atomic fluorescence spectrometry (HG-AFS) was optimised for determination of selenium in food supplements. Due to the high and varied content of Cu, Mg and Zn in the samples, the standard addition method was found to be the most appropriate. The reliability of the method was checked by the independent method of radiochemical neutron activation analysis, and good agreement was found between the two methods. HG-AFS is simple and rapid for Se determination in food supplements based on minerals. Agreement between the selenium values found and declared was worse than 10% in 9 out of 13 supplements. Furthermore, 2 of the 14 supplements did not comply with the recommendations stated in the 27^th edition of the U.S. Pharmacopoeia, which states that minerals and vitamins in food supplements should be in the range of 90 and 200% of the declared value.     

Coulometrische Wismutometrie

Zusammenfassung Durch elektrolytische Oxydation einer Bi-Anode in gesättigter NaCl-Lösung können Bi³⁺-Ionen in Lösung gebracht werden. Dieser Prozeß ermöglicht die coulometrische Bestimmung anwesender Anionen, die schwerlösliche Bi-Verbindungen bilden.Es wurden Semimikro- und Mikrobestimmungen von Phosphationen durch elektrolytisch erzeugte Bi³⁺-Ionen bei konstanter Stromstärke ausgeführt. Die Endpunktbestimmung erfolgte amperometrisch bei konstantem Potential mit einer Indikatorelektrode — tropfende Quecksilberelektrode — und mit einer gesättigten Kalomelelektrode als Bezugselektrode. Die coulometrische Wismutometrie bietet eine weitere Möglichkeit der coulometrischen Eichung volumetrischer Lösungen im Sinne des seinerzeitigen Vorschlags vonTutundi.

---

Summary Bi³⁺ ions can be brought into solution through electrolytic oxidation of a Bi-anode in saturated NaCl solution. This process makes possible the coulometric determination of the anions present that yield difficulty soluble bismuth compounds.Semimicro- and micro-determinations of phosphate ions were made via Bi³⁺-ions produced electrolytically at constant current strength. The endpoint was determined amperometrically at constant potential with an indicator electrode-dropping mercury electrode-and with a saturated calomel electrode as reference electrode. The coulometric bismuthometry affords a further possibility of the coulometric standardization of volumetric solutions in the sense of the proposal previously advanced byTutundi.

---

Résumé On peut utiliser les ions Bi³⁺ en solution par oxydation électrolytique d'une anode en bismuth, en solution de chlorure de sodium saturée. Ce procédé permet le dosage coulométrique des anions présents qui forment des composés peu solubles avec le bismuth.On a mis au point le dosage semimicro et micro des ions phosphates par les ions Bi³⁺ formés électrolytiquement sous intensité constante. On détermine par ampérométrie le point équivalent à potentiel constant à l'aide d'une électrode indicatrice — électrode de mercure à goutte pendante —et avec une électrode au calomel saturée comme électrode de référence. La «bismuthométrie» coulométrique offre de grandes possibilités pour l'étalonnage coulométrique de solutions volumétriques, suivant l'idée queTutundi a émise en son temps.

---

---

Vorgetragen beim Symposium für analytische Chemie in Graz, 29. September bis 1. Oktober 1965.

---

Wir danken Herrn Dipl.-Ing.Vladimir Pantovi für seine Hilfe bei unserer experimentellen Arbeit.     

Partial Least-Squares Study of the Effects of Organic Modifier and Physicochemical Properties on the Retention of Some Thiazoles

JPC – Journal of Planar Chromatography – Modern TLC - Reversed-phase (RP) HPTLC with aqueous ammonia-organic modifier (acetonitrile, dioxane, acetone) mobile phases has been used to...     

Flow injection analysis : Part VI. The determination of phosphate and chloride in blood serum by dialysis and sample dilution

The rapid determination of chloride and inorganic phosphate in blood serum based on continuous flow spectrophotometry was adapted to Flow Injection Analysis by applying dialysis as well as differential dilution of the injected samples. In addition to the manual injection procedure, an automated microsampling unit was developed and used. By continuous dialysis, chloride could be determined reproducibly at a sampling rate of 125 samples per hour at sample volumes of 60 μl or less. A similar sampling rate and high precision were obtained for the determination of inorganic phosphate by using differential dilution.     

Flow injection analysis. principles,applications and trends

The basic principles of Flow Injection Analysis are outlined. The parameters governing the dispersion of the injected sample zone in the system are discussed, and it is demonstrated how these parameters can be manipulated in order to suit the requirements of an individual analytical procedure. A number of examples illustrating the practical application of f.i.a. are described, comprising the use of automated, stopped-flow, merging-zones, extraction techniques as well as f.i.a. scanning and methods based on intermittent pumping. Updated lists on f.i.a. procedures published and species that can be determined by f.i.a. are included.     

Comparison of the Temperature Effect on the π∗←n and π∗←π Electronic Transition Bands of NO<Subscript>3</Subscript><Superscript>−</Superscript>(aq)

The effect of temperature on the π∗←π transition band in the UV absorption spectrum of NO₃⁻(aq) centered at ≈200 nm was studied in the temperature range 10–70 ^∘C. The observed temperature independence of this band was in contrast to the significant influence of temperature on the nitrate π∗←n transition reported recently by us. However, taking into account the electronic states involved in both the transitions, it was concluded that this finding was in accordance with our previous assumption that interconversion between spectrally distinct (with respect to π∗←n band) nitrate species included the rupture/formation of hydrogen bond(s) in the hydration shell of the nitrate ion.     

Conductivity Studies of Dilute Aqueous Solutions of Oxalic Acid and Neutral Oxalates of Sodium, Potassium, Cesium, and Ammonium from 5 to 35°C

Conductivity measurements of oxalic acid and neutral oxalates (disodium oxalate, dipotassium oxalate, dicesium, and diammonium oxalate) were performed on dilute aqueous solutions, c < 3 × 10^–3 mol-dm^–3, from 5 to 35°C. These data and those available from the literature were analyzed in terms of dissociation steps of oxalic acid, the Onsager conductivity equation for neutral oxalates, the Quint–Viallard conductivity equation for the acid, and the Debye–Hückel equation for activity coefficients, to give the limiting equivalent conductances of bioxalate anion ;(HC₂O₄ ^–) and oxalate anion (1/2C₂O₄ ^2–) and the corresponding dissociation constants K ₁ and K ₂.