Determination of fungicide residues in fruits by coupled-column liquid chromatography

Coupled-column liquid chromatography with fluorescence detection was applied to the determination of o-phenylphenol and bitertanol residues in orange and banana fruits. After extraction with a mixture of acetone, dichloromethane-petroleum ether, and ethyl acetate, an extract aliquot of 100 microL was injected directly without any additional clean-up into the chromatographic system using two reversed phase C18 coupled columns. The LC-LC approach allowed automated sample clean up of the vegetal extracts, leading to a simple and rapid analytical procedure, with limits of quantification between 0.01 and 0.05 mg kg(-1). Recovery experiments performed on orange and banana samples fortified at different concentrations (0.01 - 4 mg kg(-1)) gave average recoveries between 70 and 113% with relative standard deviations lower than 15%. The procedure developed was finally applied to orange and banana samples from different geographical locations and the results were confirmed by GC-MS.     

Determination of volatile nitrosamines in meat products by microwave-assisted extraction and dispersive liquid-liquid microextraction coupled to gas chromatography-mass spectrometry

Microwave-assisted extraction (MAE) and dispersive liquid-liquid microextraction (DLLME) coupled with gas chromatography-mass spectrometry (GC-MS) were evaluated for use in the extraction and preconcentration of volatile nitrosamines in meat products. Parameters affecting MAE, such as the extraction solvent used, and DLLME, including the nature and volume of the extracting and disperser solvents, extraction time, salt addition and centrifugation time, were optimized. In the MAE method, 0.25g of sample mass was extracted in 10mL NaOH (0.05M) in a closed-vessel system. For DLLME, 1.5mL of methanol (disperser solvent) containing 20μL of carbon tetrachloride (extraction solvent) was rapidly injected by syringe into 5mL of the sample extract solution (previously adjusted to pH 6), thereby forming a cloudy solution. Phase separation was performed by centrifugation, and a volume of 3μL of the sedimented phase was analyzed by GC-MS. The enrichment factors provided by DLLME varied from 220 to 342 for N-nitrosodiethylamine and N-nitrosopiperidine, respectively. The matrix effect was evaluated for different samples, and it was concluded that sample quantification can be carried out by aqueous calibration. Under the optimized conditions, detection limits ranged from 0.003 to 0.014ngmL(-1) for NPIP and NMEA, respectively (0.12-0.56ngg(-1) in the meat products).     

Substituent Effects on 31P NMR Chemical Shifts and 1JP–Se of triarylselenophosphates

The effect of electron-withdrawing (EW) and electron-releasing (ER) substituents on the ³¹P NMR chemical shifts and the structural parameters of a series of tris-(p-X-aryl)selenophosphates is reported in this article. Similarly to O-aryl phosphates and O-aryl thiophosphates, EW groups attached to aromatic rings induce a shielding effect on the ³¹P NMR signal. After a detailed experimental and theoretical analysis, we confirmed that the selenium atom is the main part responsible for the charge density transfer toward phosphorus through a back-bonding effect. The obtained ¹J_P-Se values for the complete series agree with this observation.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Synthesis,characterization and anticancer activity of new palladacycles derived from chiral α‐diimines

Optically pure α‐diimines quantitatively obtained in solvent‐free conditions starting from 2,3‐butanedione and (S)‐(?)‐1‐phenylethylamine and (S)‐(?)‐1‐(4‐methylphenyl)ethylamine, respectively, yielded the new chiral mono‐Pd complexes 2a–b, which have been partly characterized by IR, ¹H‐ and ¹³C‐NMR spectroscopies along with MS‐FAB⁺ spectrometry. The crystal and molecular structure for palladacycle 2a has been fully confirmed by single‐crystal X‐ray studies. Studies in vitro of 2a–b have displayed growth inhibition against different classes of cancer: leukemia (K‐562 CML), colon cancer (HCT‐15), breast cancer (MCF‐7), central nervous system (U‐251 Glio) and prostate cancer (PC‐3) cell lines. Copyright © 2009 John Wiley & Sons, Ltd.     

Potential of atmospheric pressure chemical ionization source in GC‐QTOF MS for pesticide residue analysis

The potential applications of a new atmospheric pressure source for GC‐MS analysis have been investigated in this work. A list of around 100 GC‐amenable pesticides, which includes organochlorine, organophosphorus and organonitrogenated compounds, has been used to evaluate their behavior in the new source. Favoring the major formation of the molecular ion in the source has been the main goal due to the wide‐scope screening possibilities that this fact brings in comparison with the traditional, highly fragmented electron ionization spectra. Thus, the addition of water as modifier has been tested as a way to promote the generation of protonated molecules. Pesticides investigated have been classified into six groups according to their ionization/fragmentation behavior. Four of them are characterized by the abundant formation of the protonated molecule in the atmospheric pressure source, mostly being the base peak of the spectrum. These results show that wide‐scope screening could be easily performed with this source by investigating the presence of the protonated molecule ion, MH+. The developed procedure has been applied to pesticide screening in different food samples (nectarine, orange and spinach) and it has allowed the presence of several pesticides to be confirmed such as chlorpyriphos ethyl, deltamethrin and endosulfan sulfate. The availability of a quadrupole time‐of‐flight instrument made it feasible to perform additional MS/MS experiments for both standards and samples to go further in the confirmation of the identity of the detected compounds. Results shown in this paper have been obtained using a prototype source which exhibits promising features that could be applied to other analytical problems apart from those illustrated in this work. Copyright © 2010 John Wiley & Sons, Ltd.     

Interpretation of vicinal proton–proton coupling constants of heteroaromatic molecules in terms of topological electron density descriptors

The indirect vicinal proton–proton coupling constants for pyrrole, furan, thiophene and 15 related heteroaromatic compounds were calculated using the Khon–Sham approximation. An analysis of the four Ramsey contributions to the coupling constants was carried out showing that the Fermi contact term is always positive and dominant, although the remaining contributions have a nonnegligible net negative contribution. The trends observed for the proton–proton coupling constants were rationalized in terms of the properties of the electron density. It was found that electron delocalization between the corresponding hydrogen atoms plays a major role on the observed behavior with the charges of the carbon atoms bonded to them and the accompanying geometric variations being also of importance in the coupling mechanism. Copyright © 2010 John Wiley & Sons, Ltd.     

New hydrogels from interpenetrated physical gels of agarose and chemical gels of polyacrylamide: Effect of relative concentration and crosslinking degree on the viscoelastic and thermal properties

In this article, we report on the viscoelastic and thermal properties of agarose–polyacrylamide (PAAm) interpenetrating polymer hydrogels (IPHs) and semi‐IPHs as a function of agarose concentration and PAAm crosslinking degree. The results demonstrated that the agarose is able to gel in the presence of crosslinked and linear IPHs. In addition, the reticulation of PAAm in the presence of agarose is confirmed for the case of IPHs giving rise to systems with dimensional stability at high temperatures. The formation of a fully IPH was ascertained at low agarose concentrations. A study of the morphology and nanoscale elasticity of the different systems has been carried out with atomic force microscopy/ultrasonic force microscopy (UFM). UFM data provide further evidence of interpenetration, allowing us to visualize—if present—phase‐separated domains with nanoscale resolution for the various crosslinking degrees and PAAm and agarose concentrations used during the formation of the IPHs. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Evaluation of dispersive liquid-liquid microextraction for the simultaneous determination of chlorophenols and haloanisoles in wines and cork stoppers using gas chromatography-mass spectrometry

Dispersive liquid-liquid microextraction (DLLME) coupled with gas chromatography-mass spectrometry (GC-MS) was evaluated for the simultaneous determination of five chlorophenols and seven haloanisoles in wines and cork stoppers. Parameters, such as the nature and volume of the extracting and disperser solvents, extraction time, salt addition, centrifugation time and sample volume or mass, affecting the DLLME were carefully optimized to extract and preconcentrate chlorophenols, in the form of their acetylated derivatives, and haloanisoles. In this extraction method, 1mL of acetone (disperser solvent) containing 30μL of carbon tetrachloride (extraction solvent) was rapidly injected by a syringe into 5mL of sample solution containing 200μL of acetic anhydride (derivatizing reagent) and 0.5mL of phosphate buffer solution, thereby forming a cloudy solution. After extraction, phase separation was performed by centrifugation, and a volume of 4μL of the sedimented phase was analyzed by GC-MS. The wine samples were directly used for the DLLME extraction (red wines required a 1:1 dilution with water). For cork samples, the target analytes were first extracted with pentane, the solvent was evaporated and the residue reconstituted with acetone before DLLME. The use of an internal standard (2,4-dibromoanisole) notably improved the repeatability of the procedure. Under the optimized conditions, detection limits ranged from 0.004 to 0.108ngmL(-1) in wine samples (24-220pgg(-1) in corks), depending on the compound and the sample analyzed. The enrichment factors for haloanisoles were in the 380-700-fold range.     

Global ab initio potential energy surfaces for the O2(3Σg-)+O2(3Σg-) interaction

Completely ab initio global potential energy surfaces (PESs) for the singlet and triplet spin multiplicities of rigid O(2)((3)Σ(g)(-))+O(2)((3)Σ(g)(-)) are reported for the first time. They have been obtained by combining an accurate restricted coupled cluster theory with singles, doubles, and perturbative triple excitations [RCCSD(T)] quintet potential [Bartolomei et al., J. Chem. Phys. 128, 214304 (2008)] with complete active space second order perturbation theory (CASPT2) or, alternatively, multireference configuration interaction (MRCI) calculations of the singlet-quintet and triplet-quintet splittings. Spherical harmonic expansions, containing a large number of terms due to the high anisotropy of the interaction, have been built from the ab initio data. The radial coefficients of these expansions are matched at long range distances with analytical functions based on recent ab initio calculations of the electric properties of the monomers [M. Bartolomei, E. Carmona-Novillo, M. I. Hernández, J. Campos-Martínez, and R. Hernández-Lamoneda, J. Comput. Chem. (2010) (in press)]. The singlet and triplet PESs obtained from either RCCSD(T)-CASPT2 or RCCSD(T)-MRCI calculations are quite similar, although quantitative differences appear in specific terms of the expansion. CASPT2 calculations are the ones giving rise to larger splittings and more attractive interactions, particularly in the region of the absolute minima (in the rectangular D(2h) geometry). The new singlet, triplet, and quintet PESs are tested against second virial coefficient B(T) data and, their spherically averaged components, against integral cross sections measured with rotationally hot effusive beams. Both types of multiconfigurational approaches provide quite similar results, which, in turn, are in good agreement with the measurements. It is found that discrepancies with the experiments could be removed if the PESs were slightly more attractive. In this regard, the most attractive RCCSD(T)-CASPT2 PESs perform slightly better than the RCCSD(T)-MRCI counterpart.