Dithiacrown Ether Substituted Porphyrazines: Synthesis, Single-Crystal Structure, and Control of Aggregation in Solution by Complexation of Transition-Metal Ions

The synthesis of novel magnesium, copper, and metal-free porphyrazines, peripherally substituted with dithia-7-crown-2 (MPz(7)), dithia-15-crown-5 (MPz(15)), and dithia-18-crown-6 (MPz(18)) macrocycles is reported. These compounds are prepared starting from dicyanoethylene containing crown ethers 3, 2(1), and 2(2), respectively, which contain sulfur as well as oxygen heteroatoms. The "crowned" porphyrazines bind silver(I) and mercury(II) perchlorates. UV/vis spectroscopy and electron paramagnetic resonance measurements reveal that addition of the transition-metal ions leads to dimerization of the porphyrazine complexes. In the case of the dithia-18-crown-6-substituted porphyrazines, the dimers break up to form monomeric 6:1 guest-host complexes when more than 2 equiv of the metal ion is added. The single-crystal structures of the crown ether 2(2) and the porphyrazine MgPz(18) are presented. Compound C(14)H(20)N(2)O(4)S(2) (2(2)) crystallizes in the monoclinic space group P2(1)/c with a = 10.9310(13) ?, b = 19.383(3) ?, c = 8.6976(14) ?, beta = 108.898(11) degrees, V = 1743.5(5) ?(3), and Z = 4. The structure refinement converged to R = 0.0366 and R(w) = 0.0504. Compound C(56)H(82)MgN(8)O(17)S(8) (MgPz(18)) crystallizes in the triclinic space group P&onemacr; with a = 9.584(3) ?, b = 17.672(2) ?, c = 19.620(4) ?, alpha = 84.904(14) degrees, beta = 85.21(2) degrees, gamma = 89.29(2) degrees, V = 3298.4(13) ?(3), and Z = 2. The structure refinement converged to R1 = 0.0839 and wR2 = 0.2196. The electrical properties of H(2)Pz(18) have been studied by complex impedance spectroscopy. The bulk electrical conductivity of this compound is approximately 1 order of magnitude higher than that of the corresponding 18-crown-6 phthalocyanine.     

Cold tests of open coaxial resonators in the range 9–17 GHz

A study of selective properties of coaxial open cylindrical resonators have been conducted experimentally and compared with theory. The resonator consists of an inner circular cylinder symmetrically located inside an outer weakly irregular open waveguide. Several fundamental TE modes were identified over the range 9 to 17 GHz through measurements of the resonant frequencies and the associated loaded quality factors. It has been verified that the structure and the number of resonant modes are both strongly dependent on the diameter of the coaxial insert. Such an electrodynamical system proves to be useful in guided wave applications requiring, for example, filters, frequency-tunable resonators and devices for analyzing the modal composition of a signal.     

Ernst potentials for vacuum Bianchi models

We derive Ernst potentials for vacuum Bianchi I through VII models. A scheme to find inhomogeneous generalizations of such models by using generating techniques which incorporate electromagnetic fields or gravitational wave perturbations to a seed Bianchi solution is presented.On leave of absence from: Departamento de Fisica, CINVESTAV del IPN, Mexico     

Spectroelectrochemical characterisation of poly[Ni(saltMe)]-modified electrodes

Electrogenerated polymers based on the nickel(II) complex 2,3-dimethyl-N,N'-bis(salicylidene)butane-2,3-diaminatonickel(II), poly[Ni(saltMe)], were characterised by in situ FTIR and UV/Vis spectroscopy and ex-situ EPR spectroscopy in order to gain insights into film structure, electronic states and charge conduction. The role of the nickel ions during film oxidation was probed by using EPR to study naturally abundant Ni and 61Ni-enriched polymers. The data from all the spectroscopic techniques are consistent, and clearly indicate that polymerisation and redox switching are associated with oxidative ligand based processes; coulometry suggests that one positive charge was delocalised through each monomer unit. EPR provided evidence for the non-direct involvement of the metal in polymer oxidation: the polymer is best described as a polyphenylene-type compound (conducting polymer), rather than an aggregation of nickel complexes (redox polymer), and the main charge carriers are identified as polarons. An explanation for the high electrochemical stability and conductivity of poly[Ni(saltMe)] with respect to that of poly[Ni(salen)] is proposed. based on stereochemical repulsion between monomeric units; this can impose a less compact supramolecular structure on polymers with bulkier substituents.     

Kinetics and mechanism of the phenolysis of asymmetric diaryl carbonates

The reactions 4-methylphenyl 4-nitrophenyl carbonate (MPNPC), 4-chlorophenyl 4-nitrophenyl carbonate (CIPNPC), 4-methylphenyl 2,4-dinitrophenyl carbonate (MPDNPC), and 4-chlorophenyl 2,4-dinitrophenyl carbonate (CIPDNPC) with a homogeneous series of phenoxide anions are subjected to a kinetic investigation in aqueous solution (25.0 degrees C, ionic strength 0.2 M (KCI)). Under an excess of phenoxide with respect to the substrate, all of these reactions obey pseudo-first-order kinetics and are first order in phenoxide. The Br?nsted-type plots for the nucleophilic rate constants (k(N)) are linear, with slopes beta = 0.48 (MPNPC), 0.67 (ClPNPC), 0.41 (MPDNPC), and 0.32 (ClPDNPC). The magnitude of these slopes and the absence of a curvature in the Br?nsted plot at pK(a) = 7.1 for the CIPNPC reactions are consistent with concerted mechanisms (one step). The carbonates MPDNPC and ClPDNPC are more reactive than MPNPC and CIPNPC, respectively, toward phenoxide nucleophiles. This can be explained by the presence of a second nitro group in the nucleofuge of the dinitro derivatives, which (i) leaves their carbonyl carbon more positively charged, making them better electrophiles, and (ii) makes 2,4-dinitrophenoxide a better leaving group than 4-nitrophenoxide. The 4-chloro derivatives are more reactive than the corresponding 4-methyl derivatives. This should be due to the greater electron withdrawal of 4-chloro than 4-methyl, which makes the former carbonyl more electrophilic. Comparison of the concerted phenolysis of MPNPC with the stepwise reactions of secondary alicyclic amines with the same substrate indicates that substitution of a secondary alicyclic amine group in a zwitterionic tetrahedral intermediate by a phenoxy group greatly destabilizes the intermediate. An equation is deduced for log k(N) in terms of the basicity of the nucleophile, the nonleaving moiety, and the leaving group. This equation shows that for these reactions, the sensitivity of log k(N) to the basicity of the nonleaving moiety (beta(nlg) = -0.27) is very similar to that of the nucleofuge (beta(lg) = -0.25).     

Antimony(III) Oxide Film on a Cellulose Fiber Surface: Preparation and Characterization of the Composite

Cellulose/antimony(III) oxide composites, Cel/Sb(2)O(3), with oxide loadings of 1.7, 5.4, and 9.2 wt% were prepared by reacting the precursor SbCl(3) reagent with cellulose in dry ethanol solution. The reaction of the Lewis acid and the cellulose fibers occurred at the~amorphous domains of the biopolymer, increasing the crystallinity degree of the composite compared with that of the untreated cellulose. The scanning electron microscopy images and metal mapping for all samples showed that the oxide film layer uniformly covered the fiber surfaces with no detectable agglomerates of the oxide particles. The synchrotron X-ray diffraction patterns indicated that the antimony oxide film was obtained as a crystalline phase with orthorombic structure. The atomic ratios of O/Sb, determined by X-ray photoelectron spectroscopy, indicated that, for Cel/Sb(2)O(3) samples with 9.3 wt% loading, the fiber surface is nearly saturated by the oxide layer. The thermal stability of Cel/Sb(2)O(3) compared to that of untreated cellulose is practically unaffected. Copyright 2000 Academic Press.     

Thermal decomposition of novel rare-earth selenites

TG and DTA have been carried out on new anhydrous rare-earth selenites R₂Se_aO_3+2a (a=3.5,4) in order to establish their stability. Decomposition occurs in three steps attributed to successive losses of SeO₂. The first process gives rise to other new group of selenites of composition R₂Se₃O₉, which crystallize in two different forms depending on the rare-earth element. The second process leads to isomorphous compounds R₂SeO₅. The final product of thermal degradation is R₂O₃. All products were characterized by chemical analysis and X-ray powder diffraction methods.     

Biologically active compounds through catalysis: efficient synthesis of N-(heteroarylcarbonyl)-N'-(arylalkyl)piperazines

A practical route for the synthesis of new biologically active 5-HT(2 A) receptor antagonists has been developed. In only three catalytic steps, this class of central nervous system (CNS) active compounds can be synthesized efficiently with high diversity. As the initial step, an anti-Markovnikov addition of amines to styrenes provides an easy route to N-(arylalkyl)piperazines, which constitute the core structure of the active molecules. Here, base-catalyzed hydroamination reactions of styrenes with benzylated piperazine proceeded in high yield even at room temperature. After catalytic debenzylation, the free amines were successfully carbonylated with different aromatic and heteroaromatic halides and carbon monoxide to yield the desired compounds in good to excellent yields. The two key reactions, base-catalyzed hydroamination of styrenes and palladium-catalyzed aminocarbonylation of haloarenes/heterocycles, showed tolerance towards various functional groups, thereby demonstrating the potential to synthesize a wide variety of new derivatives of this promising class of pharmaceuticals.