Nonextensivity and entropy of astrophysical sources

We study the X-ray intensities of 142 light curves of cataclysmic variables, galaxies, pulsars, supernova remnants and other X-ray sources present in the public data collected by the instrument All Sky Monitor on board the satellite Rossi X-ray Timing Explorer. We show that the X-ray light curves coming from astrophysical systems obey Tsallis’s q$q$-Gaussian distribution as probability density. This fact strongly suggests that these astrophysical systems behave in a non-extensive manner. Furthermore, the q$q$ entropic indices for these systems were obtained and they provide an indication of the nonextensivity degree of each of these astrophysical systems. The q$q$-value increases for systems if the Tsallis entropy decreases.     

Determination of strain and stress distribution on shearwalls by using the speckle photography technique

Speckle photography (SP) is a powerful tool that is adequate to determine small displacements in micrometer range. This information shows other characteristics of structure deformation under loads and can be determined as stress and strain distribution. In this paper we present the results of the application of the SP technique used to study the behaviour of discontinuities in a shearwall model. These structural elements are very important to the stability of buildings. The displacement whole field around the discontinuities and loading points was determined using the pointwise method. This allows us to determine stress distribution at the point of interest by means of the suitable equations. We also present the stress distribution obtained through the finite element method in order to compare the results obtained by means of these two techniques. Good correspondence was found between the displacements determined by both techniques (r=0.982) and also between the stress values we obtained.     

Pre-equilibrium dipole strength in charge asymmetric peripheral heavy-ion reactions

We report on the results obtained from the study of the ³²S + ⁶⁴Ni and ³²S + ⁵⁸Ni peripheral reactions at incident energies E _lab = 288 MeV and E _lab = 320 MeV, respectively. High-energy γ-rays were detected in an array of 8 seven-pack BaF₂ clusters. Coincidence with complex fragments detected in 12 three-stage telescopes ensured the selection of peripheral reaction events. All of the relevant reaction parameters were kept constant with the exception of the different initial dipole moment caused by the different entrance channel charge asymmetry. While for quasi-elastic events no N/Z effect was observed in the differential γ-ray multiplicities of the two reactions, for deep-inelastic events a larger dipole γ-ray emission occurs during the more N/Z asymmetric reaction. A theoretical interpretation based on a collective Bremsstrahlung analysis of the reaction dynamics is presented. Received: 26 September 2002 / Accepted: 13 November 2002 / Published online: 6 March 2003 RID="a" ID="a"e-mail: pierroutsakou@na.infn.it RID="b" ID="b"Present address: INFN, Laboratori Nazionali di Legnaro, Padova, Italy. Communicated by C. Signorini     

Stark broadening of neutral helium lines and spectroscopic diagnostics of pulsed helium plasma

Stark broadening parameters (widths and shifts) of two He I isolated spectral lines are measured in a plasma of a low-pressure pulsed arc. Plasma electron densities, determined by spectroscopic method based on previously calibrated He I lines, ranges from 1 x 10¹⁶ cm^-3 to 6 x 10¹⁶ cm^-3. The plasma electron temperature acquired by a Boltzmann plot of several He I lines, lies in the interval 8 000-30 000 K. Results of this work are compared with theoretical predictions and with other experimental data.Received: 30 April 2003, Published online: 29 July 2003PACS: 52.70.-m Plasma diagnostic techniques and instrumentation - 52.70.Kz Optical (ultraviolet, visible, infrared) measurements - 32.70.Jz Line shapes, widths, and shiftsR. Santamarta: Present address: DESY/ZEUS Hamburg, Germany.     

Performance evaluation of fiber Bragg grating sensors by digital holographic technique, strain gauge measurement

In view of the growing interest for non-destructive tests of materials, geodynamical monitoring and in general remote sensing, there is a great effort to bring practical optical sensors from research labs to industrial and environmental applications. In this paper, we employ digital holographic technique as an efficient tool for evaluating the strain measurement capability of fiber Bragg gratings (FBG). A cantilever beam has been employed as a test structure under loading test. The strain measurements results obtained by fiber-based sensors have been compared to those obtained by using full-field digital holographic technique and point-wise strain gauge sensors glued on the same cantilever beam. A simple theoretical model is also presented to interpret and compare the experimental results coming from different techniques.     

Gold aggregates on silica templates and decorated silica arrays for SERS applications

In this work, we report the fabrication and characterization of size controllable gold nanoparticles (NPs) aggregates for their application in surface enhanced Raman scattering (SERS). Aggregates were prepared using two methodologies: (i) by using silica particles arrays as a template to agglomerate gold NPs between the inter-particle interstices, and (ii) by functionalizing silica particles to be used as support to graft gold nanoparticles and thus to form decorated silica particle arrays. These substrates were used in the detection of Rhodamine 6G producing an enhancement factor (EF) from 10⁴ to 10⁶ that is associated to the increment of hot spot (HS) sites, and the fact that plasmon resonance from aggregates and absorption wavelength of test molecules are closely in resonance with excitation wavelength. The EF was also reduced when the plasmon resonance was red-shifted as a result of the increment of aggregate size. In spite of this, the EF is high enough to make these SERS substrates excellent candidates for sensing applications.     

The Role of the Eu<Superscript>3+</Superscript> Concentration on the SrMoO<Subscript>4</Subscript>:Eu Phosphor Properties: Synthesis,Characterization and Photophysical Studies

SrMoO₄ doped with rare earth are still scarce nowadays and have attracted great attention due to their applications as scintillating materials in electro-optical like solid-state lasers and optical fibers, for instance. In this work Sr_1−xEu_xMoO₄ powders, where x = 0.01; 0.03 and 0.05, were synthesized by Complex Polymerization (CP) Method. The structural and optical properties of the SrMoO₄:Eu³⁺ were analyzed by powder X-ray diffraction patterns, Fourier Transform Infra-Red (FTIR), Raman Spectroscopy, and through Photoluminescent Measurements (PL). Only a crystalline scheelite-type phase was obtained when the powders were heat-treated at 800 °C for 2 h, 2θ = 27.8° (100% peak). The excitation spectra of the SrMoO₄:Eu³⁺ (λ_Em. = 614 nm) presented the characteristic band of the Eu^3 + 5L₆ transition at 394 nm and a broad band at around 288 nm ascribed to the charge-transfer from the O (2p) state to the Mo (4d) one in the SrMoO₄ matrix. The emission spectra of the SrMoO₄:Eu³⁺ powders (λ_Exc. = 394 and 288 nm) show the group of sharp emission bands among 523–554 nm and 578–699 nm, assigned to the ⁵D₁→⁷F_{0,1and 2} and ⁵D₀→⁷F_{0,1,2,3 and 4}, respectively. The band related to the ⁵D₀→⁷F₀ transition indicates the presence of Eu³⁺ site without inversion center. This hypothesis is strengthened by the fact that the band referent to the ⁵D₀→⁷F₂ transition is the most intense in the emission spectra.     

Structural complexity of disordered surfaces: Analyzing the porous silicon SFM patterns

This paper introduces a relative structural complexity measure for the characterization of disordered surfaces. Numerical solutions of 2d+1 KPZ equation and scanning force microscopy (SFM) patterns of porous silicon samples are analyzed using this methodology. The results and phenomenological interpretation indicate that the proposed measure is efficient for quantitatively characterize the structural complexity of disordered surfaces (and interfaces) observed and/or simulated in nano, micro and ordinary scales.     

Mixing of electronic states in pentacene adsorption on copper

By combining experimental and theoretical approaches, we study the adsorption of pentacene on copper as a model for the coupling between aromatic molecules and metal surfaces. Our results for the interface electronic structure are not compatible with a purely physisorption picture, which is conventionally employed for such systems. Nay, we demonstrate electronic mixing between molecular orbitals and metal electronic states.     

Influence of aspect ratio and anisotropy distribution in ordered CoNi nanowire arrays

The size effects on magnetic properties of nanowires arrays were studied varying the nanowires diameter and maintaining the same periodicity among them, for two different nominal compositions of Co and Ni in the alloy form. The competition among magnetocrystalline and shape anisotropies changes drastically from smallest to biggest diameters altering the easy axis direction. In the case of 75% of Co in alloy, experimental values of the effective anisotropy constant (K_eff) vary from positive to negative depending on the diameter, which means a reversal of the easy axis direction. For 50% of Co the shape anisotropy dominates over the magnetocrystalline for all studied diameters.