Using second-order calibration to identify and quantify aromatic sulfonates in water by high-performance liquid chromatography in the presence of coeluting interferences

We used the Generalized Rank Annihilation Method (GRAM), a second-order calibration method, to quantify aromatic sulfonates in water with high-performance liquid chromatography (HPLC) when interferences coeluted with the analytes of interest. With GRAM, we can quantify in only two chromatographic analyses, one for a calibration sample and one for the unknown sample. The calculated concentrations were not statistically different to those obtained when the chromatographic separation of the unknown sample was modified in order to completely separate the analyte from the interferences before univariate calibration. With GRAM, the concentrations are determined much more quickly because a complete resolution is not required.     

Extraction and exchange behavior of metal species in therapeutically applied peat

The binding and availability of metals (Al, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Zn) in therapeutically applied peat (Grosses Gifhorner Moor, Sassenburg/North Germany) was characterized by means of a versatile extraction approach. Aqueous extracts of peat were obtained by a standardized batch equilibrium procedure using high-purity water (pH 4.5 and 5.0), 0.01 mol l(-1) calcium chloride solution, 0.01 mol l(-1) ethylenediaminetetraacetic acid (EDTA) and 0.01 mol l(-1) diethylenetriamine pentaacetic acid (DTPA) solution as metal extractants. In addition, the availability of peat-bound metal species was kinetically studied by collecting aliquots of extracts after different periods of extraction time (5, 10, 15, 30, 60 and 120 min). Metal determinations were performed by atomic spectrometry methods (AAS, ICP-OES) and dissolved organic matter (DOM) was characterized by UV/Vis measurements at 254 and 436 nm, respectively. Of the extractants studied Ca, Mg and Mn were the most available metals, in contrast to peat-bound Fe and Al. The relative standard deviation s(r) of the developed extraction procedures was mostly in the range of 4 to 20%, depending on the metal and its concentration in peat. A pH increase favored the extraction of metals and DOM from peat revealing complex extraction kinetics. Moreover, a competitive exchange between peat-bound metal species and added Cu(II) ions showed that >100 mg of Cu(II) per 50 g wet peat was necessary to exchange the maximum of bound metals (e.g. 21.8% of Al, 3.9% of Fe, 79.0% of Mn, 81.9% of Sr, related to their total content).     

Study on resolution capacity and secondary mechanisms of three different TSK gels for organic SEC

A comparative study on the elution behavior in size-exclusion chromatography (SEC) of three polymeric TSK gel packings, named H, H(HR), and H(XL) types, is performed. The deviations of the universal calibration (u.c.) curves of seven solvent-polymer systems show evidence that the existence of secondary effects accompanying the main SEC mechanism. These secondary mechanisms are a consequence of the binary enthalpic interactions between the different components of the chromatographic system, such as polymer-solvent, polymer-gel and solvent-gel. However, in the present case, the observed deviations from a unique u.c. curve can mainly be attributed to adsorption of polymeric solutes (analytes) onto the residual moieties of the gel surfaces, (i.e., to polymer-gel interactions). These enthalpic interactions can be quantitated by the values of the distribution coefficient, Kp, which follows the order: Kp (gel H(XL)) > Kp (gel H(HR)) > Kp (gel H). Moreover, the specific resolution of the three types of packings is also estimated, and its comparison yields that Rsp (gel H(HR)) > Rsp (gel H(XL)) > Rsp (gel H), in good agreement with their increasing particle size and decreasing crosslinking degrees. Finally, the errors and inaccuracies committed on the estimation of the sample average molar masses from their respective calibration curves serves the assessment that the packing with lesser secondary mechanisms is the H-type.     

Solid state coordination chemistry of copper(II)/α-hydroxycarboxylato/2,2′-bipyridine systems

Four new two-ligand complexes of copper(II) with 2,2′-bipyridine and one of three different α-hydroxycarboxylic acids (lactic, H₂LACO; 2-methyllactic, H₂MLACO; and mandelic, H₂MANO) were prepared. Complexes 1–3 of general formula [Cu(HL)₂(bipy)]·nH₂O (HL=monodeprotonated acid), were characterized by elemental analysis, IR, electronic and EPR spectroscopy, magnetic measurements and thermogravimetric analysis. Complexes 1 (HL=HLACO, n=2), 2 (HL=HMLACO, n=1) and 3a (the result of attempted recrystallization of 3, of formula [Cu(HMANO)(bipy)₂](HMANO)·H₂MANO·CH₃CN were studied by X-ray diffractometry. The copper atom is in an elongated, tetragonally distorted octahedral environment in 1 and 2 and in 3a has a coordination polyhedron intermediate between a square pyramid and a trigonal bipyramid, as evaluated in terms of the parameter τ. In 1 and 2 the α-hydroxycarboxylato ligand is bidentate and monoanionic but in 3a there are three forms: a monodentate monoanion, a monoanionic counterion, and a neutral molecule.     

Langmuir monolayers of the zwitterionic surfactant hexadecyl 1-N-L-tryptophan glycerol ether

We report the formation of Langmuir monolayers of pure zwitterionic hexadecyl 1-N-L-tryptophan glycerol ether (C(16)-TGE) surfactant and mixed monolayers of cationic-zwitterionic surfactant obtained modifying the pH of the subphase. The pressure-area and surface potential-area isotherms and fluorescence microscopy measurements have been used to characterize the surface phase transitions in the monolayers. These transitions appeared at larger areas as the pH decreased from 6.0 to 2.0 and almost disappeared as the pH decreased further. The analysis of the surface potential and the infrared reflection-absorption spectroscopy data suggests that the phase transition is associated with a change of orientation of both the hydrocarbon chain and the aromatic group of the surfactant with respect to the air-water surface. The surface rheology of the monolayers was studied by quasielastic light scattering and by the oscillatory barrier technique. The results indicate that there is at least one relaxation process in the monolayer.     

Interaction of antimicrobial arginine-based cationic surfactants with liposomes and lipid monolayers

The present work examines the relationship between the antimicrobial activity of novel arginine-based cationic surfactants and the physicochemical process involved in the perturbation of the cell membrane. To this end, the interaction of these surfactants with two biomembrane models, namely, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) multilamellar lipid vesicles (MLVs) and monolayers of DPPC, 1,2-dipalmitoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] sodium salt (DPPG), and Escherichia coli total lipid extract, was investigated. For the sake of comparison, this study included two commercial antimicrobial agents, hexadecyltrimethylammonium bromide and chlorhexidine dihydrochloride. Changes in the thermotropic phase transition parameters of DPPC MLVs in the presence of the compounds were studied by differential scanning calorimetry analysis. The results show that variations in both the transition temperature (Tm) and the transition width at half-height of the heat absorption peak (deltaT1/2) were consistent with the antimicrobial activity of the compounds. Penetration kinetics and compression isotherm studies performed with DPPC, DPPG, and E. coli total lipid extract monolayers indicated that both steric hindrance effects and electrostatic forces explained the antimicrobial agent-lipid interaction. Overall, in DPPC monolayers single-chain surfactants had the highest penetration capacity, whereas gemini surfactants were the most active in DPPG systems. The compression isotherms showed an expansion of the monolayers compared with that of pure lipids, indicating an insertion of the compounds into the lipid molecules. Owing to their cationic character, they are incorporated better into the negatively charged DPPG than into zwitterionic DPPC lipid monolayers.     

Evaluation of thermodynamic properties of irreversible protein thermal unfolding measured by DSC

Summary We assessed the applicability of the extrapolation procedure at infinite scanning rate to differential scanning calorimetry (DSC) data related to irreversible protein unfolding. To this aim, an array of DSC curves have been simulated on the basis of the Lumry-Eyring model N↔U→F. The results obtained confirmed that when the apparent equilibrium constant K_{app (T=T1/2)} is lower than 3, the application of the extrapolation procedure provides accurate thermodynamic parameters. Although this procedure applies only to monomeric proteins for which the Lumry-Eyring model is a reasonable approximation, it will hopefully contribute to increase the potential of DSC in obtaining reliable thermodynamic information regarding the folding/unfolding equilibrium.     

A density functional theory study on the electrocyclization of 1,2,4,6-heptatetraene analogues: converting a pericyclic to a pseudopericyclic reaction

A comprehensive B3LYP/6-31+G* study on the electrocyclization of 1,2,4,6-heptatetraene analogues was conducted. Starting from the cyclization of (2Z)-2,4,5-hexatrienal, a pericyclic disrotatory process favored by the assistance of a electron lone pair, we incorporated small modifications in its molecular structure to obtain a truly pseudopericyclic process. To this purpose electronegative atoms (fluorine and nitrogen) were added to give a more electrophilic character on the carbon atom which is attacked by the electron lone pair of the oxygen atom. The complete pathway for each reaction was determined, and changes in magnetic properties were monitored with a view to estimating the aromatization associated with each process. This information, together with the energetic and structural results, allowed us to classify the reactions as pseudopericyclic or pericyclic. Among all studied reactions only one was a truly pseudopericyclic process and another was a borderline case. The features of this unequivocally pseudopericyclic case were analyzed in depth.     

Ratios between content of fatty acids as markers for mixture of cow and goat milk

The fat of mixture of goat and cow milk, extracted by di-ethylic ether, was gas chromatographically analysed in order to propose an analytical procedure suitable to reveal small additions of cow milk to goat milk. The obtained results show evident differences in the percentages of some fatty acids. An attempt to apply the peak area ratios, corresponding to the methyl esters of fatty acids, suggested by the literature for cow milk did not yield good results. Other ratios suitable to reveal even the presence of low percentages (up to 5 %) of cow milk in goat milk were found and proposed in this paper. Such ratios are sensitive and can be defined markers towards cow or goat milk and also towards extraneous fat like lard or colza seeds oil.     

Stereoselective synthesis of novel types of cyclopropyl carbocyclic nucleosides containing quaternary stereogenic centers

Versatile and stereocontrolled synthetic entries to novel types of cyclopropyl carbocyclic nucleosides are described. The target products have been synthesized from suitable cyclopropane precursors obtained, in turn, from olefinic compounds derived from D-glyceraldehyde as a chiral precursor. Selective manipulation of the functional groups has allowed the preparation of enantiopure nucleosides, some of them displaying opposite chirality. All these molecules contain a quaternary stereogenic carbon at C-1 or C-3 of the cyclopropane ring and bear an amino, a hydroxymethyl, or a methyl group as an additional substituent. In one instance, thymine is directly linked to the cyclopropane. A methylene unit serves as the spacer in the other synthesized nucleosides.