氮化铁催化剂的制备及其苯胺催化加氢性能

用α－Ｆｅ２Ｏ３与氨气程序升温还原方法制备出不同温度氮气的氮化铁系列催化剂。通过ＸＲＤ测试对氮化过程中的晶相转变进行了分析。在中压反应装置上考察了氮化铁系列催化剂上苯胺加氢活性以及反应条件对苯胺加氢反应活性的影响。结果表明，在７００℃氮化制香的氮化铁催化剂显示有较高的苯胺加氢活性，在氢压为３．０ＭＰａ，温度为２５０℃，ｎ（Ｈ２）／ｎ（ｏｉｌ）＝１８，液体空速（ＷＨＳＶ）为０．３ｈ＾－１时，该催化剂     

Temperature-programmed desorption and adsorption of hydrogen on Mo2N

Hydrogen adsorption-desorption over Mo₂N has been studied using a temperature-programmed technique. It is revealed that hydrogen on Mo₂N exhibits very high mobility leading to migration of the surface hydrogen into the sublayer and bulk of the sample or the reverse. The surface hydrogen species are preferentially formed when adsorption is carried out below 573 K. On increasing the adsorption temperature to above 573 K, the quantity of hydrogen species located in the sublayer or/and bulk of the Mo₂N sample increases significantly.     

High pressure Raman studies of 7,7,8,8-tetracyanoquinodimethane (TCNQ) and CuTCNQ

The high-pressure Raman studies of 7,7,8,8-tetracyanoquinodimethane (TCNQ) single crystals and polycrystalline CuTCNQ are presented in this paper. TCNQ shows a phase transition at 22 kbar, a pressure higher than reported earlier. CuTCNQ undergoes a first order phase transition at 30 kbar, which is characterized by the abrupt disappearance of all the Raman bands.     

Luminescent organoboron quinolate polymers

The synthesis of well-defined luminescent organoboron polymers via a novel three-step procedure starting from silylated polystyrene is reported. Highly selective borylation of poly(4-trimethylsilylstyrene) (PS-Si), followed by replacement of the bromine substituents in poly(4-dibromoborylstyrene) (PS-BBr) with substituted thienyl groups (R = H, 3-hexyl, 5-hexyl), and final introduction of the 8-hydroxyquinolato moiety yields a series of new organoboron quinolate polymers in 67-83% isolated yield. The hexyl-substituted polymers are highly soluble and solution-processable yielding thin films that efficiently emit light at 513-514 nm upon excitation at 395 nm.     

Monitoring the transformation of colloidal crystals by styrene vapor using atomic force microscopy

The stages of transformation of a colloidal crystalline film of latex spheres to a new periodic structure were imaged by atomic force microscopy. Colloidal crystalline films were prepared with 320 nm diameter poly(styrene-co-2-hydroxyethyl methacrylate) (PSt/HEMA) spheres. The hexagonally ordered surfaces of the colloidal crystalline films were transformed with styrene vapor at room temperature to a new morphology having holes in the surface and the same periodicity as the original films. The surfaces of colloidal crystals and the transformed films have a raspberry-like texture superposed on the 320 nm hexagonal periodicity. Both height images and phase images reveal that the latex spheres shrink and the transformation proceeds by an order-disorder-order sequence. The final structure is an interconnected colloidal array with smaller polystyrene particles dispersed in a continuous PSt/HEMA matrix.     

Synthesis of 4″-benzyloxyimino-4″-deoxyavermectin Bla derivatives

Six new 4″-benzyloxyimino-4″-deoxyavermectin Bla derivatives were synthesized from avermectin Bla by the selective protection of C-5-hydroxy group,oxidation of C-4″-hydroxy group,and deprotection followed by reaction with O-substituted hydroxylamine hydrochlorides.Their structures were confirmed by IR,~1H NMR,~(13)C NMR and MS.Insecticidal activities of the derivatives against Phopalosiphum pseudobrassicae,Spodoptera exigua and Pluteua xylosteua were evaluated.     

Two New ent-Kaurane Diterpenoids from Isodon xerophilus

In continuation of our research on diterpenoids in the Isodon species, several newcompounds"' were obtained from the leaves oflsodon xerophilus (C. Y. Wu et H. W. Li)H. Hara (Labiatae), a perennial shrub native to Yunnan province. Further fractionation ofthe EtOAc extract led to the isolation of tWo new enl-kauranoids, xerophilusin E (l) andxerophilusin F (2). This paper deals with the structUral elucidation of the newcompounds.Xerophilusin E (l), a minor constitUent, was obtained as p…     

Fluorescence ratiometric pH sensor prepared from covalently immobilized porphyrin and benzothioxanthene

A fluorescence ratiometric sensor for pH determination is described in this paper. The sensor incorporated the pH-sensitive dye meso-5,10,15,20-tetra-(4-allyloxyphenyl)porphyrin (TAPP) as an indicator and a pH-insensitive dye N-(2-methacryloxyethyl)benzo[k,l]thioxanthene-3,4-dicarboximide (MBTD), a benzothioxanthene derivative, as a reference for fluorescence ratiometric measurement. To prevent leakage of the dyes, both were photocopolymerized with acrylamide, hydroxyethyl methacrylate, and triethylene glycol dimethacrylate on the silanized glass surface. The reproducibility and response time of the prepared sensor were sufficient. Most common coexisting inorganic ions and organic compounds did not interfere with pH sensing. In the acidic pH range from 1.5 to 5.0 the fluorescence intensity ratio of the two dyes varied linearly as a function of pH. The sensing membrane was found to have a lifetime of at least one month. The sensor was applied to the analysis of waste water and artificial samples.     

Catalytic Adsorptive Stripping Voltammetry of Germanium(IV) in the Presence of Gallic Acid and Vanadium(IV)‐EDTA

A highly sensitive and selective catalytic adsorptive cathodic striping procedure for the determination of trace germanium is presented. The method is based on adsorptive accumulation of the Ge(IV)‐gallic acid (GA) complex onto a hanging mercury drop electrode, followed by reduction of the adsorbed species. The reduction current is enhanced catalytically by addition of vanadium(IV)‐EDTA. The optimal experimental conditions include the use of 0.03 mol/L HClO₄ (pH1.6), 6.0×10^?3 mol/L GA, 3.0×10^?3 mol/L V(IV), 4.0×10^?3 mol/L EDTA, an accumulation potential of ?0.10 V(vs. Ag/AgCl), an accumulation time of 120 s and a differential pulse potential scan mode. The peak current is proportional to the concentration of Ge(IV) over the range of 3.0×10^?11 to 1.0×10^?8 mol/L and the detection limit is 2×10^?11 mol/L for a 120 s adsorption time. The relative standard deviation at 5.0×10^?10 mol/L level is 3.1%. No serious interferences were found. The method was applied to the determination of germanium in ore, mineral water and vegetable samples with satisfactory results.