Novel TEMPO-oxidized cellulose nanofiber/polyvinyl alcohol/polyethyleneimine nanoparticles for Cu2+ removal in water

Cellulose - In this study, environmentally friendly TEMPO-oxidized cellulose nanofiber (TO-CNF)/polyvinyl alcohol (PVA)/polyethyleneimine (PEI) nanoparticles were obtained by assembling PEI into...     

Cellulosic nanocomposite membranes from hydroxypropyl cellulose reinforced by cellulose nanocrystals

Cellulosic nanocomposite membranes were prepared by incorporation of cellulose nanocrystals (CNCs) into a hydroxypropyl cellulose (HPC) matrix using a mixing/evaporation technique. CNCs were obtained from filter paper using the sulfuric acid hydrolysis method with the aid of ultrasonication. The relationship between the microstructure and mechanical properties of the CNCs/HPC nanocomposite membranes was studied. Scanning electron microscopy showed that the CNCs were well dispersed in the HPC matrix, and the fracture surface demonstrated a fibrous characteristic. With increasing CNCs content, the tensile strength and Young’s modulus of the CNCs/HPC nanocomposite membranes gradually increased. At 5 wt% content of CNCs, the strength was increased by 525 % and the Young’s modulus by 124 % compared with pure HPC membrane. Moreover, the effect of the phase change of HPC on the mechanical properties of the CNCs_5wt%/HPC nanocomposite membranes and the corresponding mechanism were also studied.     

Sandwich‐like Catalyst–Carbon–Catalyst Trilayer Structure as a Compact 2D Host for Highly Stable Lithium–Sulfur Batteries

Herein, we propose the construction of a sandwich‐structured host filled with continuous 2D catalysis–conduction interfaces. This MoN‐C‐MoN trilayer architecture causes the strong conformal adsorption of S/Li₂S_x and its high‐efficiency conversion on the two‐sided nitride polar surfaces, which are supplied with high‐flux electron transfer from the buried carbon interlayer. The 3D self‐assembly of these 2D sandwich structures further reinforces the interconnection of conductive and catalytic networks. The maximized exposure of adsorptive/catalytic planes endows the MoN‐C@S electrode with excellent cycling stability and high rate performance even under high S loading and low host surface area. The high conductivity of this trilayer texture does not compromise the capacity retention after the S content is increased. Such a job‐synergistic mode between catalytic and conductive functions guarantees the homogeneous deposition of S/Li₂S_x, and avoids thick and devitalized accumulation (electrode passivation) even after high‐rate and long‐term cycling.     

γ-Fe2O3/Ag/TiO2的制备与抗菌性能

采用两步法合成了γ-Fe₂O₃/Ag/TiO₂复合光催化剂, 以大肠埃希氏菌(E. coli)为目标菌, 对数去除率为评价指标评价了催化剂的抗菌性能, 优化了催化剂的最佳制备参数. 通过X射线衍射、 扫描电子显微镜、 X射线光电子能谱和紫外-可见漫反射光谱等手段对催化剂进行了表征. 结果表明, 当Ti/Ag摩尔比为1:0.05, 煅烧时间为3 h, 煅烧温度为350 ℃时, γ-Fe₂O₃/Ag/TiO₂表现出最佳抗菌活性. 复合催化剂具有介孔结构, 比表面积为89.1 m²/g; 光吸收边界达690 nm, 有良好的可见光响应能力; 磁性较强, 在水处理应用中可有效分离和重复使用. 反应条件不受光源限制, 在有/无光照下均具有良好的抗菌活性, 且太阳光辐照下对E. coli的对数去除率可达6.28.     

金属铜(Ⅱ)配合物催化2,6-二甲基苯酚氧化偶合反应的动力学研究

 合成了四种金属铜(Ⅱ)-四氮配合物,并用初始速率法研究了25 ℃时四种配合物催化H2O2氧化偶合2,6-二甲基苯酚生成3,3′,5,5′-四甲基联苯二醌反应的动力学. 结果表明此偶合反应符合Michaelis-Menten酶催化动力学,并由此获得了反应在不同配合物和不同pH值情况下的动力学参数k2和Km. 研究还发现不同的铜配合物其催化活性有不同的最适pH,具有较好电子共轭效应和合适刚柔性结构的铜配合物更有利于反应的进行. 对此催化反应的动力学机理研究发现,铜配合物的一级酸式电离中间物种是反应的主要催化活性物种. 质谱分析表明,此类铜配合物都能催化2,6-二甲基苯酚进行C-O偶合反应生成不同聚合度的高分子.     

虾肝肠胞虫感染病理特征、18S rRNA基因序列及系统进化树分析

为调查浙江省部分地区虾肝肠胞虫(Enterocytozoon hepatopenaei,EHP)暴发来源及与其他宿主来源的微孢子虫进化关系,本研究利用形态学特征和分子鉴定,尝试对引起浙江多地凡纳对虾生长缓慢综合征的病原进行探究.同时基于18S rRNA基因序列分析该病原与其他地区及其他宿主来源微孢子虫的进化关系.结果显...     

一类非线性奇摄动Robin问题解的渐近性态

利用渐近理论和微分不等式的方法,该文研究了一类非线性奇摄动Robin问题. 证明了其解的存在性,并得到了解的任意n 阶一致有效渐近展开式.     

Developing a novel alkaline anion exchange membrane derived from poly(ether‐imide) for improved ionic conductivity

We have developed a novel alkaline anion exchange membrane derived from poly(ether‐imide) for improved ionic conductivity. The effects of several important parameters on the chloromethylation of the membrane were investigated. These parameters included reaction temperature, reaction time, concentration of chloromethylation agent, concentration of polymer, and the amount of catalyst. The quaternization of the synthesized chloromethylated polymer was studied as well. The results show that all the studied parameters exhibited significant impacts on chloromethylation. Among them, the concentration of the chloromethylation agent played a key role in increasing the chloromethyl functional group attachment onto the polymer. It was found that the gelation could be avoided if these reaction parameters were controlled. It was also found that using an appropriate quaternization approach could significantly improve the ionic conductivity and optimize the conductivity of the membrane even though the functional chloromethyl groups attached to the polymer are limited. Copyright © 2009 John Wiley & Sons, Ltd.     

ASYMPTOTIC BEHAVIOR OF SINGULARLY PERTURBED SOLUTION FOR A CLASS OF ROBIN PROBLEM OF NONLINEAR NON-AUTONOMOUS EQUATION

In this paper, using the layer theory, a class of singularly perturbed Robin problem of nonlinear non-autonomous equation is considered. According to the different regions of the boundary value, the asymptotic behaviors of solution for the original problem are obtained simply and conveniently.