Synthesis and performance of Li2NiTi3O8 as a new anode material for lithium-ion batteries

The titanate spinel Li₂NiTi₃O₈ is proposed for the first time as a new anode for lithium-ion batteries and successfully synthesized via a facile ball-milling assisted solid-state reaction method. The sample is characterized by X-ray diffraction patterns (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), galvanostatic charge–discharge tests, cyclic voltammetry (CV) tests, and electrochemical impedance spectroscopy (EIS). The results reveal that the Li₂NiTi₃O₈ nanoparticles have well-distributed morphology, and the particle size ranges between 100 and 300 nm. Although the initial coulombic efficiency is only 56.3 %, the Li₂NiTi₃O₈ electrode still exhibits a high rate capability and excellent cycling stability. The Li₂NiTi₃O₈ anode provides a large capacity of 212.3 mAh g^?1 at 0.1 A g^?1 after 10 cycle, which is close to its theoretical capacity (223.6 mAh g^?1). Even after 100 cycles, it still delivers a quite high capacity of 203.98 mAh g^?1, with no significant capacity fading. This indicates that the as-synthesized Li₂NiTi₃O₈ material is a promising anode material for lithium-ion batteries.     

Temperature dependent Raman scattering in polycrystalline Bi4Ti3O12 thin films

Polycrystalline Bi₄Ti₃O₁₂ thin films were prepared on quartz substrates by pulsed laser deposition. The films were crystallized in the orthorhombic layer perovskite structure confirmed by X-ray diffraction and Raman spectroscopy. The Raman spectra are strongly dependent on temperature. A subtle phase transition in the temperature range 473-573 K exists in polycrystalline BTO thin films, which is evidenced by the disappearance of the Raman band at 116 cm⁻¹ and appearance of a new Raman band at 151 cm⁻¹. The two broad Raman bands centered at the 57 and 93 cm⁻¹ at 300 K break up into clusters of several sharp Raman peaks at 77 K, due to monoclinic distortion of orthorhombic structure at low temperature in the as-prepared Bi₄Ti₃O₁₂ thin films.     

Structure evolution and stoichiometry control of Pb(Zr, Ti)O3 thick films fabricated by electrospray assisted vapour deposition

Well-crystallized and stoichiometric Pb(Zr, Ti)O₃ (PZT) films, typically ∼5 μm thick, with pure perovskite-type rhombohedral structures have been successfully prepared via an electrospray assisted vapour deposition (ESAVD) method. Control of the deposition temperature within a narrow range of 300-400 °C resulted in films with the most desirable phases. PZT films with close stoichiometric match with the expected composition ratio and uniform element distribution were obtained by adding the appropriate levels of excess Pb in the precursor solutions. The annealed films were uniform, dense, compact and adherent to the substrates. The dielectric constant, ?_r, and loss tangent, tan δ, of the fabricated PZT films measured at 10 kHz were 442 and 0.09, respectively. The ESAVD deposited PZT films showed a remanent polarization, P_r, of 15.3 μC/cm² and coercive field, E_c, of 86.7 kV/cm. These results demonstrate the clear potential of the ESAVD method as a promising technique for the fabrication of thick PZT films.     

A simple pathway to ordered silica nanopattern from self-assembling of block copolymer containing organic silicon block

Self-assembly of block copolymer is an effective strategy to prepare periodic structures at nanoscale. In this paper an unique and very simple method to prepare inorganic silica nanopattern is demonstrated from self-assembling of poly(styrene-block-dimethylsiloxane) (PS-b-PDMS) on the surface of silicon wafer. To simplify the patterning process, at first we obtain highly ordered PDMS microdomains, which are covered with PS layer by controlling solvent vapor annealing conditions. Following exposure to UV/O₃ irradiation, nanopatterned surface consisting of silicon oxide is fabricated directly via selectively etching PS phase and converting PDMS phase into silicon oxide. As tuning the composition of the block copolymer, hexagonally packing dot and straight stripe pattern can be obtained. Finally, the time evolution from spheres morphology to aligned long cylinders is discussed. These results hold promise for nanolithography and the fabrication of nanodevices.     

Effects of carbonization temperature on microstructure and electrochemical performances of phenolic resin-based carbon spheres

Activated phenol resin-based carbon spheres (APCS) electrodes with high double layer capacitance and good rate capability were prepared from phenol resin-based spheres (PS) at different carbonization temperatures prior to KOH activation. The carbonization temperature has a marked effect on both the pore structure and the electrochemical performances of the APCS in 6 M KOH electrolyte. APCS carbonized at 600 °C results in higher specific surface area and larger pore size, and hence higher capacitance and better rate capability. The specific capacitance of the APCS in 6 M KOH aqueous solution can be as high as 282 F g⁻¹. It remains 252 F g⁻¹ as the current density increases to 1000 mA g⁻¹.     

A tangent-plane marker-particle method for the computation of three-dimensional solid surfaces evolving by surface diffusion on a substrate

We introduce a marker-particle method for the computation of three-dimensional solid surface morphologies evolving by surface diffusion. The method does not use gridding of surfaces or numerical differentiation, and applies to surfaces with finite slopes and overhangs. We demonstrate the method by computing the evolution of perturbed cylindrical wires on a substrate. We show that computed growth rates at early times agree with those predicted by the linear stability analysis. Furthermore, when the marker particles are redistributed periodically to maintain even spacing, the method can follow breakup of the wire.     

Directional terahertz radiation through groove-assisted hole array

The authors theoretically demonstrate the terahertz beam shaping with metallic subwavelength holes array surrounded by concentric periodic grooves. High transmission and directional radiation can be obtained simultaneously for the resonant excitation of the surface wave in the combined structure. Finite-difference time-domain simulation results shows that the transmission mainly depends on the lattice constant of hole array and the features of incident surface around it, while the far-field angle distribution is dominated by the details of the output surface. This compact beam shaping structure is hoped to serve as a basic device for future terahertz systems.     

Note on Generalized Quantum Gates and Quantum Operations

Recently, Gudder proved that the set of all generalized quantum gates coincides the set of all contractions in a finite-dimensional Hilbert space (S. Gudder, Int. J. Theor. Phys. 47:268–279, 2008). In this note, we proved that the set of all generalized quantum gates is a proper subset of the set of all contractions on an infinite dimensional separable Hilbert space ℋ. Meanwhile, we proved that the quantum operation deduced by an isometry is an extreme point of the set of all quantum operations on ℋ. This subject is supported by NSF of China (10571113).     

Detection of scattered light pulses at femto-Joule level by using a picosecond BBO optical parametric amplifier

We report a technique for detecting weak scattered light pulses based on a 532 nm pumped picosecond β-barium-borate collinear optical parametric amplifier. The measured maximum slope gain factor of the amplifier was found to be around 10⁷, and the energy detection limit was of the order of fJ/pulse for the signal of 730 nm and the idler of 1.5 μm at a pumping intensity of 2.83 GW/cm². The linearity of the gain for this amplifier was found to be excellent for a seeding level of lower than 420 fJ per pulse. The maximum gains and the energy detection limits for the scattered light pulses from various scattering targets were found to be poorer than that from the reflective mirror, owing to the degraded beam quality and the depolarization of the scattered light. A reduction of the maximum gain for the scattered light with the increase of the angle of incidence, which causes pulse broadening and reduces the photon flux of the signal, was investigated. The feasibility of detecting weak scattered light in the infrared by using idler-to-signal frequency up-conversion was also demonstrated, in which the infrared seeder located in the idler branch of the amplifier was injected as the seeding beam and was then parametrically up-converted into the visible signal branch, with an even higher gain.