TM掺杂Ⅱ-Ⅳ-Ⅴ2黄铜矿半导体的电磁性质

利用自旋局域密度泛函的第一性原理对3d过渡金属(TM=V，Cr，Mn，Fe，Co和Ni)掺杂的Ⅱ-Ⅳ-Ⅴ2(CdGeP2和ZnGeP2)黄铜矿半导体的电磁性质进行系统计算，结果发现：V和Cr掺杂的CdGeP2和ZnGeP2将出现铁磁状态(FM)，Mn，Fe以及Co掺杂的CdGeB和ZnGeP2将出现反铁磁状态(AFM)，而Ni掺杂时，稀磁半导体(DMS)的磁性比较不稳定，其中Cr掺杂的CdGeP2和ZnGeP2将可能是具有较高居里温度Tc的DMS，当TM-3d电子的t2g态部分被填充时，其掺杂的DMS将出现FM状态；而当TM-3d电子的t2g态全满或者全空时，其掺杂的DMS将出现AFM状态，在(Cd，Mn)GeP，和(Zn，Mn)(GeP2中分别掺入电子和空穴载流子，可以发现载流子是否具有TM-3d电子的巡游特性是。DMS是否出现FM状态的主要原因。     

A meshless model for transient heat conduction analyses of 3D axisymmetric functionally graded solids

A meshless numerical model is developed for analyzing transient heat conductions in three-dimensional （3D） axisymmetric continuously nonhomogeneous functionally graded materials （FGMs）. Axial symmetry of geometry and boundary conditions reduces the original 3D initial-boundary value problem into a two-dimensional （2D） problem. Local weak forms are derived for small polygonal sub-domains which surround nodal points distributed over the cross section. In order to simplify the treatment of the essential boundary conditions, spatial variations of the temperature and heat flux at discrete time instants are interpolated by the natural neighbor interpolation. Moreover, the using of three-node triangular finite element method （FEM） shape functions as test functions reduces the orders of integrands involved in domain integrals. The semi-discrete heat conduction equation is solved numerically with the traditional two-point difference technique in the time domain. Two numerical examples are investigated and excellent results are obtained, demonstrating the potential application of the proposed approach.     

Mixed multi-region design of diffractive optical element for projection exposure system

The diffractive optical element (DOE) is widely used to generate various illumination modes in the projection lithography system. The working principle and design methods of the DOE are discussed in detail in this paper. A mixed multi-region design method is proposed to calculate the phase of DOE based on the poor spatial coherence of excimer laser, using the Gerchberg–Saxton (GS) algorithm. The DOEs generating circular, dipole and quadrupole illumination modes are designed and simulated by three different methods: single region design, repeated multi-region design and mixed multi-region design. The performance of these DOEs are compared and analyzed with these three design methods. The mixed multi-region design method is used to design the DOEs generating three illumination modes, the diffraction efficiencies are greater than 85%, and the non-uniformities of illumination are less than 3%. The analysis results indicate that the DOE designed by the mixed multi-region design can achieve higher diffraction efficiency and illumination uniformity of the far-field intensity distribution without modifying the GS algorithm.     

Ranking spreaders by decomposing complex networks

Ranking the nodes? ability of spreading in networks is crucial for designing efficient strategies to hinder spreading in the case of diseases or accelerate spreading in the case of information dissemination. In the well-known k-shell method, nodes are ranked only according to the links between the remaining nodes (residual links) while the links connecting to the removed nodes (exhausted links) are entirely ignored. In this Letter, we propose a mixed degree decomposition (MDD) procedure in which both the residual degree and the exhausted degree are considered. By simulating the epidemic spreading process on real networks, we show that the MDD method can outperform the k-shell and degree methods in ranking spreaders.     

Near-infrared downconversion in Eu2＋ and Pr3＋ co-doped KSrPO4 phosphor

A novel near-infrared (NIR) downconversion (DC) phosphor KSrPO4 :Eu2+ , Pr3+ is synthesized by the conventional high temperature solid-state reaction. The Eu2+ acts as an efficient sensitizer for Pr3+ in the KSrPO4 host. With broad-band near-ultraviolet light excitation induced by the 4f→5d transition of Eu2+ , the characteristic NIR emission of Pr3+ , peaking at 974 nm and 1019 nm due to 3P0 → 1G4 and 1G4 → 3H4 transitions, is generated as a result of the energy transfer from Eu2+ to Pr3+ . The luminescence spectra in both the visible and the NIR regions and the decay lifetime curves of Eu2+ prove the energy transfer from Eu2+ to Pr3+ . This Eu2+ and Pr3+ co-doped KSrPO4 phosphor may be a promising candidate to modify the spectral mismatch behavior of crystalline solar cells and sunlight.     

Characterization of ceramic PVD thin films on AZ31 magnesium alloys

Ceramic thin films have been widely used to protect the metal substrate as coatings in the past years. In order to improve the poor corrosion resistance of AZ31 magnesium alloy, the study in this paper used the electron beam evaporation method to prepare ceramic PVD films on its surface with TiO₂ and Al₂O₃ as donors, respectively. Atomic force microscopy (AFM), scanning electron microscope (SEM), energy dispersive X-ray spectrometer (EDS), Auger electron spectroscopy (AES) and X-ray diffraction (XRD) were used to investigate the surface morphology, composition and microstructure of the thin films. Both films deposited on AZ31 took on compact top surface morphologies and grew as amorphous structures on substrate. AES test not only showed that films compositions deviated the standard stoichiometric ratios, but also found that element Mg diffused into films and existed as magnesium oxide in the TiO_x film as well as the AlO_x film. In the electrochemical corrosion test, the AlO_x coating on AZ31 exhibited the largest electrochemical impedance in a 3.5% NaCl solution. But it did not show better corrosion resistance than others for the poorer adhesion. Even if its thickness was small, the TiO_x coating on AZ31 exhibited the best corrosion resistance in this study. According to the observation and analysis, the damage of these films on AZ31 in aggressive solutions was mainly due to the existence of pores, microcracks, vacancies and poor adhesion between coating and substrate.     

Synthesis, structure and optical properties of Eu/TiO2 nanocrystals at room temperature

The nanocrystal samples of titanium dioxide doped with europium ion (Eu³⁺/TiO₂ nanocrystal) are synthesized by the sol-gel method with hydrothermal treatment. The Eu³⁺ contents (molar ratio) in the samples are 0, 0.5%, 1%, 2%, 3% and 4%. The X-ray diffraction, UV-Vis spectroscopy data and scanning electron microscope image show that crystallite size is reduced by the doping of Eu³⁺ into TiO₂. Comparing the Raman spectra of TiO₂ with Eu³⁺/TiO₂ (molar ratio Eu³⁺/TiO₂=1%, 2% and 4%) nanocrystals at different annealing temperatures indicates that the anatase-to-rutile phase transformation temperatures of Eu³⁺/TiO₂ nanocrystals are higher than that of TiO₂. This is due to the formation of Eu-O-Ti bonds on the surface of the TiO₂ crystallite, as characterized by the X-ray photoelectron spectroscopy. The photoluminescence spectra of TiO₂ in Eu³⁺/TiO₂ nanocrystals are interpreted by the surface self-trapped and defect-trapped exciton relaxation. The photoluminescence of Eu³⁺ in Eu³⁺/TiO₂ nanocrystals has the strongest emission intensity at 2% of Eu³⁺ concentration.     

基于安卓平台的糖尿病监护系统的研究及实现

基于目前针对糖尿病的研究主要集中在健康管理及血糖浓度监测方面,在糖尿病病情控制方面并不乐观的现状,设计开发了一套能够实时监护老年患者注射药物情况的远程家庭医疗系统。该系统由智能检测硬件系统,手机客户端和WEB信息管理端组成,不仅可以解决独孤老人时常忘记注射胰岛素的问题,也有利于解决我国老年患者糖尿病监护难的问题,同时也能提醒青壮年实时携带注射针剂盒,缓解糖尿病并发症的发生。通过实时实验测试,该糖尿病监护系统可靠、稳定,且具有良好的实际应用价值。     

壳聚糖辐射裂解制备基因载体及其体外转染性能研究

Chitosan (CS) is expected to be an ideal gene carrier for its high biosafety. In this work, CS with low molecular weight were prepared through the γ-ray radiation on the acetic acid solution of CS. The CS chains were scissioned under the γ-ray radiation, and the molecular weight (MW) of CS decreased with the absorbed dose. When the absorbed dose was above 30 kGy, the molecular weight of CS decreased about an order of magnitude. The γ-ray-radiation-scissioned CS can e ectively bind with plasmid (pEGFP) through complex coacervation method, forming pEGFP/ γ-ray-radiation-scissioned CS complex particles with a size of 200-300 nm. The complex particles have good stability and little cytotoxicity. The in uitro gene transfection efficiencies of the pEGFP/ γ-ray-radiation-scissioned CS complex particles were investigated by fluorescence microscope and flow cytometry. The results showed that the gene vectors using γ-ray-radiation-scissioned CS as the carrier will possess better gene transfection efficiency than those using natural high-MW CS as the carrier. The higher the absorbed dose, the smaller the MW of CS and the better transfection efficiency of the corresponding gene vector. This work provides a green and simple method on the preparation of CS-based gene vectors with high efficiency and biosafety.