Near Infrared Spectroscopy of the Cretaceous Red Beds in Inner Mongolia DongshengmiaoSCIEI北大核心CSCD

Take the cores and surface weathered soil from the Cretaceous red beds in the western of Dongshengmiao mine of Inner Mongolia and analysis with near-infrared spectroscopy. The result shows that near-infrared spectroscopy can identify mineral quickly through the characteristic absorption peaks of each group. The Cretaceous red beds in the western of Dongshengmiao mine is argillaceous cementation, it is mainly composed of quartz, feldspar, montmorillonite, illite, chlorite, muscovite etc, the mineral composition is mainly affected by the upstream source area. The clay mineral like montmorillonite water swelling and uneven drying shrinkage expands the original crack and creates new cracks, reduces its strength, which is the mainly reason of its disintegration. According to the composition of clay mineral, we speculate its weathering process is mainly physical weathering, the climate during the weathering is cold and dry. The results can not only improve the geological feature of the mining area, but also show that the near-infrared spectroscopy technology can analyze the mineral composition of soil and rock effectively on the basis of Mineral spectroscopy, which demonstrates the feasibility of the near-infrared spectroscopy can analyze minerals in soil and rock quickly, that shows the feasibility in geology study, provides new ideas for the future research of soil and rock.     

Main Components of Xinjiang Lavender Essential Oil Determined by Partial Least Squares and Near Infrared SpectroscopySCIEI北大核心CSCD

This work was undertaken to establish a quantitative analysis model which can rapid determinate the content of linalool, linalyl acetate of Xinjiang lavender essential oil. Totally 165 lavender essential oil samples were measured by using near infrared absorption spectrum(NIR), after analyzing the near infrared spectral absorption peaks of all samples, lavender essential oil have abundant chemical information and the interference of random noise may be relatively low on the spectral intervals of 7100-4 500 cm(-1). Thus, the PLS models was constructed by using this interval for further analysis. 8 abnormal samples were eliminated. Through the clustering method, 157 lavender essential oil samples were divided into 105 calibration set samples and 52 validation set samples. Gas chromatography mass spectrometry (GC-MS) was used as a tool to determine the content of linalool and linalyl acetate in lavender essential oil. Then the matrix was established with the GC-MS raw data of two compounds in combination with the original NIR data. In order to optimize the model, different pretreatment methods were used to preprocess the raw NIR spectral to contrast the spectral filtering effect, after analysizing the quantitative model results of linalool and linalyl acetate, the root mean square error prediction(RMSEP) of orthogonal signal transformation (OSC) was 0.226, 0.558, spectrally, it was the optimum pretreatment method. In addition, forward interval partial least squares (FiPLS) method was used to exclude the wavelength points which has nothing to do with determination composition or present nonlinear correlation, finally 8 spectral intervals totally 160 wavelength points were obtained as the dataset. Combining the data sets which have optimized by OSC-FiPLS with partial least squares(PLS) to establish a rapid quantitative analysis model for determining the content of linalool and linalyl acetate in Xinjiang lavender essential oil, numbers of hidden variables of two components were 8 in the model. The performance of the model was evaluated according to root mean square error of cross-validation (RMSECV) 9 root mean square error of prediction (RMSEP). In the model, RESECV of linalool and linalyl acetate were 0.170 and 0.416, respectively; RMSEP were 0.188 and 0.364. The results indicated that raw data was pretreated by OSC and FiPLS, the NIR-PLS quantitative analysis model with good robustness, high measurement precision; it could quickly determine the content of linalool and linalyl acetate in lavender essential oil. In addition, the model has a favorable prediction ability. The study also provide a new effective method which could rapid quantitative analysis the major components of Xinjiang lavender essential oil.     

Nonisothermal kinetics study with advanced isoconversional procedure and DAEM

The precursor of LiNiPO₄ was synthesized by solid-state reaction at low-heating temperature using LiOH·H₂O and NH₄NiPO₄·H₂O as raw materials. LiNiPO₄ was obtained by calcining the precursor. Based on the advanced isoconversional procedure and the distributed activation energy model (DAEM), the activation energies calculated indicated that the thermal process involved two stages which stage II was a kinetically complex process, but stage I was single-step process. The most probable mechanism for the stage I is random nucleation and subsequent growth. DAEM and nonlinear model-fitting method were applied to study the stage II of decomposition process of the precursor. The distributions of activation energy, f(E _a) and values of preexponential factor A of the stage II of the thermal decomposition of precursor were obtained on the basis of DAEM. The results of nonlinear model-fitting method showed the most probable mechanisms of the parallel reactions for stage II are chemical reaction and nucleation.     

Thermal properties of chlorosulfonated polyethylene via gas–solid phase method

The thermal properties of chlorosulfonated polyethylene (CSM), which was prepared via gas–solid phase method, were studied in this article. The thermal curves were completely tested by differential thermal analysis, thermogravimetry, and differential thermogravimetry. The results showed that CSM 3550 and CSM 3570 prepared by gas–solid phase method had more excellent thermal properties (high initial/final temperature of degradation) than those via solution method, due to the uniform chlorine distribution of them in macromolecular chain. The differential scanning calorimetry curves showed that the transitions of CSM 3550 and CSM 3570 from glassy to the elastic state were also higher than those via solution method. Particularly, CSM 3570 was amorphous and no clear melting peak was observed during the melting process.     

Improved Crystallinity of Poly(3-hexylthiophene-2,5-diyl):[6,6]-Phenyl-C61 Butyric Acid Methyl Ester Film by Pulsed Electrospray Deposition

We investigated crystallinity parameters and ordering domains of poly(3-hexylthiophene-2,5-diyl) blended in [6,6]-phenyl-C₆₁-butyric acid methyl ester films, which were fabricated by pulsed electrospray deposition methods. The crystallinity parameter and the ordering domain were estimated from Raman and optical absorption spectra, respectively. As a result, they were improved with decreasing the off time of pulse voltage, corresponding to the slow evaporation speed of solvent. In addition, both the space-charge limited current mobility and the photoconversion efficiency showed same trend. A highest photoconversion efficiency of 1.11 % was achieved without the thermal annealing process after depositing the active layer.     

Restraint of stress in fabricating the large areas of crack-free porous silica films in the presence of composite polydimethylsiloxane

To present a new method of fabricating the large areas of crack-free porous silica films by introduction of composite polydimethylsiloxanes (PDMS). We employed two kinds of side-chain polyether modified by PDMS terminated with Si–CH₃ and Si–OC₂H₅ groups in preparation of large areas of porous silica films. The porous film presents a mesopore structure with a porosity of 58.0 %, which is fit for thermal-isolating layer applied in pyroelectric devices. The stress evolution on gel-to-ceramic film conversion has been investigated. The results reveal that a slow decrease in tensile stress before 250 °C and a slow increase after 250 °C can be observed, which is closely related to the alteration of chemical composition in the heat-treatment process. It is clear that the stress has been restrained with the addition of composite PDMS.     

Visible‐Light‐Responsive Reversible Photoacid Based on a Metastable Carbanion

A new photoacid that reversibly changes from a weak to a strong acid under visible light was designed and synthesized. Irradiation generated a metastable state with high C?H acidity due to high stability of a trifluoromethyl‐phenyl‐tricyano‐furan (CF₃PhTCF) carbanion. This long‐lived metastable state allows a large proton concentration to be reversibly produced with moderate light intensity. Reversible pH change of about one unit was demonstrated by using a 0.1 mM solution of the photoacid in 95 % ethanol. The quantum yield was calculated to be as high as 0.24. Kinetics of the reverse process can be fitted well to a second‐order‐rate equation with k=9.78×10² M ^?1 s^?1. Response to visible light, high quantum yield, good reversibility, large photoinduced proton concentration under moderate light intensity, and good compatibility with organic media make this photoacid a promising material for macroscopic control of proton‐transfer processes in organic systems.     

Kinetic Resolution of Racemic Mandelic Acid Esters by N,N′‐Dioxide–Scandium‐Complex‐Catalyzed Enantiomer‐Selective Acylation

A simple and efficient acylative kinetic resolution of racemic mandelic acid esters was accomplished with a chiral N,N’‐dioxide–scandium(III) complex under mild and base‐free reaction conditions. A variety of mandelic acid esters performed well in the reaction, obtaining both acylated products (up to 49% yield, 97% ee) and recovered substrates (up to 49% yield, 95% ee) in high enantioselectivities with perfect selectivity factors (up to 247). The enantioselective recognition and catalytic models were also proposed for the catalytic KR reaction.     

纤连蛋白在石墨烯修饰二氧化钛表面吸附的计算机模拟

采用全原子分子动力学模拟方法研究了纤连蛋白(FN)在金红石表面、23%石墨烯覆盖率的金红石表面、92%石墨烯覆盖率的金红石表面、石墨表面的吸附行为.模拟结果表明:FN在金红石表面吸附不稳定.通过石墨烯修饰二氧化钛表面可降低金红石表面的亲水性;当表面含有石墨烯层时,FN都将稳定地吸附在表面上.在23%石墨烯覆盖率的金红石表面上,FN的特异性识别位点朝向溶液而有利于整合素识别.DSSP分析结果显示在40 ns的分子动力学模拟过程中,FN的七个β-折叠结构在所有体系中均没有发生太大变化.由于有石墨烯层存在,表面附近水分子层密度减小.FN的表面吸附能随着表面石墨烯覆盖率的增加而增大.石墨烯修饰能加强二氧化钛表面对蛋白质的吸附.本工作可以为移植体修饰生物材料设计与开发提供参考.     

Rational Design of Cyclometalated Iridium(III) Complexes for Three-Photon Phosphorescence Bioimaging

Compared to 2PE (two-photon excitation) microscopy, 3PE microscopy has superior spatial resolution, deeper tissue penetration, and less defocused interference. The design of suitable agents with a large Stokes shift, good three-photon absorption (3PA), subcellular targeting, and fluorescence lifetime imaging (FLIM) properties, is challenging. Now, two Ir^III complexes (3PAIr1 and 3PAIr2) were developed as efficient three-photon phosphorescence (3PP) agents. Calculations reveal that the introduction of a new group to the molecular scaffold confers a quadruple promotion in three-photon transition probability. Confocal and lifetime imaging of mitochondria using Ir^III complexes as 3PP agents is shown. The complexes exhibit low working concentration (50 nm ), fast uptake (5 min), and low threshold for three-photon excitation power (0.5 mW at 980 nm). The impressive tissue penetration depth (ca. 450 μm) allowed the 3D imaging and reconstruction of brain vasculature from a living specimen.