DFT studies on the multi‐channel reaction of CH3S+NO2

The mechanisms for the reaction of CH₃S with NO₂ are investigated at the QCISD(T)/6‐311++G(d,p)//B3LYP/6‐311++G(d,p) on both single and triple potential energy surfaces (PESs). The geometries, vibrational frequencies, and zero‐point energy (ZPE) correction of all stationary points involved in the title reaction are calculated at the B3LYP/6‐311++G(d,p) level. More accurate energies are obtained at the QCISD(T)/6‐311++G(d,p). The results show that 5 intermediates and 14 transition states are found. The reaction is more predominant on the single PES, while it is negligible on the triple PES. Without any barrier height for the whole process, the main channel of the reaction is to form CH₃SONO and then dissociate to CH₃SO+NO. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

2-十四烷基-DTPA及其钆(Ⅲ)螯合物的合成与表征(英)

Synthesis and characterization of the ligand, [2-tetradecyl-3,6,9-tris(carboxymethyl)-3,6,9-triazaundecan-1,11-dioic acid, H₅L] and its Gd(Ⅲ) chelate are described. Protonation constants for H₅L (lgK_i^H = 10.80, 8.40, 4.30, 2.80, 2.15) and the stability constant for GdL^2- (lgK_GdL^2-= 22.75) were determined by potentiometric titration and are similar with the related values of DTPA and Gd-DTPA respectively. The results obtained show that the basicity of the ligand and the stability constant of its Gd(Ⅲ) chelate are not obviously altered after introduction of a linear chain tetradecyl group at the terminal acetic acid residue of DTPA.     

Controlled ring‐opening polymerization of propylene oxide catalyzed by double metal‐cyanide complex

A double metal‐cyanide catalyst based on Zn₃[Co(CN)₆]₂ was prepared. This catalyst is very effective for the ring‐opening polymerization of propylene oxide. Polyether polyols of moderate molecular weight having low unsaturation (<0.015 meq/g) can be prepared under mild conditions. The molecular weight of polymer is entirely controlled by a reacted monomer‐to‐initiator ratio. The polymers prepared with stepwise addition of monomer exhibit a narrower molecular weight distribution as compared with those prepared with one‐step addition of monomer. Various compounds containing active hydrogen, except basic compounds and low‐carbon carboxylic acid, may be used as initiators. The reaction rate increases with increasing catalyst amount and decreases with rising initiator concentration. Polymerization involves a rapid exchange reaction between the active species and the dormant species. It was also proven that, to a certain extent, the chain termination of this catalytic system is reversible or temporary. ¹³C NMR analysis showed that the polymer has a random distribution of the configurational sequences and head‐to‐tail regiosequence. It is assumed that the polymerization proceeds via a cationic coordination mechanism. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1142–1150, 2002     

高效液相色谱-电感耦合等离子体质谱法同时测定化妆品中5种含溴防腐剂

建立了同时测定化妆品中苯扎溴铵、2-溴-2-硝基-1,3-丙二醇、5-溴-5-硝基-1,3-二■烷、甲基二溴戊二腈、溴氯芬5种含溴防腐剂的高效液相色谱-电感耦合等离子体质谱法(HPLC-ICP-MS)。样品经含0.1%甲酸的甲醇溶液超声提取后,采用Agilent Eclipse-C_(18)(150 mm×4.6 mm,5μm)色谱柱分离,以0.1%甲酸-甲醇为流动相进行梯度洗脱,ICP-MS测定组分中的~(79)Br,以保留时间定性,外标法定量。5种含溴防腐剂均在0.5～100 mg/L范围内线性关系良好(r0.999),检出限为1.5～3.0μg/g,不同基质化妆品中的回收率为91.2%～108%,相对标准偏差(n=6)为1.3%～4.2%。该方法快速、准确、灵敏、专属性强,适用于化妆品中5种含溴防腐剂的定性定量分析。     

The Synthesis of Bis（carboxyalkylmethyl） Diselenides by Selenium Transfer Reaction of Aryl Selenoamides

Aryl selenoamides react smoothly with a-haloacetic acid in various alcohol to givecorresponding bis(carboxyalkylmethyl) diselenides in good yields.     

高效阳离子交换法分离纯化蛋清中的溶菌酶

 建立了用高效阳离子交换分离纯化蛋清中溶菌酶的新方法 ,讨论了纯化的工艺条件。蛋清样品匀浆后 ,用氯化钠初步纯化 ,然后用弱阳离子交换柱XIDACE WCX分离。结果表明 ,被纯化的溶菌酶和杂蛋白得到很好分离。经活性检测 ,溶菌酶过柱后的活性回收率为 10 7% ,蛋白的比活为 15 4 6 7U/mg ,纯化倍数提高了 5 6倍。用尺寸排阻 (SEC)鉴定 ,得到的溶菌酶呈均一性。该法较传统软基质低压离子交换分离速度快 ,纯化效率高。     

Three New Triterpenoids from Lycopodium japonicum Thunb

Three new triterpenoids, (3β,8β,14α,21α)‐26,27‐dinoronocerane‐3,8,14,21‐tetrol ( 1 ), (3β,8β,14α,21β)‐26,27‐dinoronocerane‐3,8,14,21‐tetrol ( 2 ), and lycopodiin A ( 3 ), together with four known compounds, lycoclavanol ( 4 ), lycoclaninol ( 5 ), α‐onocerin ( 6 ), and 3‐epilycoclavanol ( 7 ), were isolated from Lycopodium japonicum Thunb (Lycopodiaceae). Their structures were established by means of spectroscopic analyses. Compounds 3 and 7 showed moderate antitumor activity. Compounds 4 and 6 exhibited acetylcholinesterase inhibition activity.     

Microwave-assisted reaction of peptide formation by amino acid with phosphate:Exploration of the most possible channels for the origin of life

The formation of peptides and then protein by small abiological molecules clusters such as amino acid is a key stage in the origin of life[1]. More and more ex- perimental results showed that phosphate plays an important role in the formation of biomolecules in prebiotic chemical evolution. The principal reservoirs of biochemical energy are phosphates (such as ATP). The peculiar role of phosphates in contemporary life might suggest its essential role in prebiotic energy conversion, syntheses …     

Low dielectric thermoset. II. Synthesis and properties of novel 2,6‐dimethyl phenol–dipentene epoxy

A 2,6‐dimethyl phenol–dipentene adduct was synthesized from dipentene (DP) and 2,6‐dimethyl phenol, and then a 2,6‐dimethyl phenol–DP epoxy was synthesized from the reaction of the resultant 2,6‐dimethyl phenol–DP adduct and epichlorohydrin. The proposed structures were confirmed by Fourier transform infrared, elemental analysis, mass spectra, NMR spectra, and epoxy equivalent weight titration. The synthesized 2,6‐dimethyl phenol–DP adduct was cured with 4,4‐diamino diphenyl methane, phenol novolac, 4,4‐diamino diphenyl sulfone, and 4,4‐diamino diphenyl ether. The thermal properties of the cured epoxy resins were studied with differential scanning calorimetry, dynamic mechanical analysis, dielectric analysis, and thermogravimetric analysis. These data were compared with those for the bisphenol A epoxy system. The cured 2,6‐dimethyl phenol–DP epoxy exhibited a lower dielectric constant (ca. 3.1), a lower dissipation factor (ca. 0.065), a lower modulus, lower thermal stability (5% degradation temperature = 366–424 °C), and lower moisture absorption (1.21–2.18%) than the bisphenol A system but a higher glass‐transition temperature (ca. 173–222 °C) than that of bisphenol A system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4084–4097, 2002     

The self-organization properties of <Emphasis Type="Italic">n</Emphasis>-dodecylammonium α-glutamate/<Emphasis Type="Italic">n</Emphasis>-C<Subscript>5</Subscript>H<Subscript>11</Subscript>OH/water system

A biocompatible surfactant-n-dodecylammonium α-glutamate (GDA) with biodegradable and biocompatible properties was synthesized, and the phase behavior and the structural properties of GDA/n-pentanol/water system was studied by small-angle X-ray diffraction, electron spin resonance, and freeze-fracture transmission electron microscopy (FF-TEM). In the ternary phase diagram of GDA/n-pentanol/water system, there exist three isotropic regions—O/W, bicontinuous, and W/O structures, and two anisotropic regions—hexagonal liquid crystal (HEX), and lamellar liquid crystal (LLC) regions. UV irradiation causes the decrease in the interlayer space, d, of lamellar liquid crystal and in the radius, r, of column aggregates of hexagonal liquid crystal, but it has little effect on the structure of O/W and W/O microemulsions.