Theoretical studies of mechanisms of cycloaddition reaction between difluoromethylene carbene and acetone

Mechanisms of the cycloaddition reaction between singlet difluoromethylene carbene and acetone have been investigated with the second‐order Møller–Plesset (MP2)/6‐31G* method, including geometry optimization and vibrational analysis. Energies for the involved stationary points on the potential energy surface (PES) are corrected by zero‐point energy (ZPE) and CCSD(T)/6‐31G* single‐point calculations. From the PES obtained with the CCSD(T)//MP2/6‐31G* method for the cycloaddition reaction between singlet difluoromethylene carbene and acetone, it can be predicted that path B of reactions 2 and 3 should be two competitive leading channels of the cycloaddition reaction between difluoromethylene carbene and acetone. The former consists of two steps: (i) the two reactants first form a four‐membered ring intermediate, INT2, which is a barrier‐free exothermic reaction of 97.8 kJ/mol; (ii) the intermediate INT2 isomerizes to a four‐membered product P_2b via a transition state TS2b with an energy barrier of 24.9 kJ/mol, which results from the methyl group transfer. The latter proceeds in three steps: (i) the two reactants first form an intermediate, INT1c, through a barrier‐free exothermic reaction of 199.4 kJ/mol; (ii) the intermediate INT1c further reacts with acetone to form a polycyclic intermediate, INT3, which is also a barrier‐free exothermic reaction of 27.4 kJ/mol; and (iii) INT3 isomerizes to a polycyclic product P₃ via a transition state TS3 with an energy barrier of 25.8 kJ/mol. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Determination of adefovir in human plasma by liquid chromatography/tandem mass spectrometry: application to a pharmacokinetic study

A liquid chromatography/tandem mass spectrometry (LC/MS/MS) method was developed and validated to determine the concentrations of adefovir [9-(2-phosphonylmethoxyethyl)adenine, PMEA] in human plasma. After one-step protein precipitation of plasma samples by methanol, adefovir was analyzed by LC/MS/MS using positive electrospray ionization. Chromatography was performed on a C18 column. The extraction recoveries of adefovir were found to be 85.1-89.3%. Adefovir was stable under routine laboratory conditions. A minimal matrix effect resulting in a slight ionization enhancement of adefovir (<10.9%) was observed, which did not markedly affect the behavior of the calibrations curves and accuracy and precision data. The method had a chromatographic run time of 7.8 min and a linear calibration curve over the concentration range 1.5-90 ng/mL for adefovir. The lower limit of quantification of the method was 1.5 ng/mL. The intra- and inter-day precision was less than 8.4%. These results indicated that this LC/MS/MS method has high selectivity and efficiency, and acceptable accuracy, precision and sensitivity. The validated LC/MS/MS method has been successfully used in a pharmacokinetic study in healthy volunteers treated with oral adefovir dipivoxil at 10 and 20 mg.     

Lewis acid mediated reactions of cyclopropyl aryl ketones with alpha-ketoesters: facile preparation of 5,6-dihydropyran-2-ones

[reaction: see text] A new general method for the synthesis of 5,6-dihydropyran-2-ones from cyclopropyl aryl ketones (monoactivated cyclopropanes) and alpha-ketoesters in good to excellent yields has been developed. The process involves a cascade of reactions, including a nucleophilic ring-opening reaction of monoactivated cyclopropane by H2O, Lewis acid mediated transesterification, and an aldol type reaction.     

β-环糊精与两性表面活性剂相互作用

用表面张力法研究了β-环糊精与十一烷基酰胺甲酸钠(C₁₁H₂₃CONHCOONa,SF)两性表面活性剂在不同温度下的包结作用。结果表明:SF的表面张力值(β)及表观临界胶束浓度(cmc^*)加入β-CD后增加,β-CD浓度越大,γ和cmc^*增加越多,且SF的cmc^*与β-CD浓度存在线性关系,随温度的升高,两性表面活性剂的表面张力值降低,意味着它们的表面活性随温度升高而增强。利用表面张力测定了β-CD-SF体系在不同温度下的包结形成常数K_a,进而求得了包结过程的焓变和熵变,结果表明,该过程是焓和熵均有利的过程,进一步说明疏水作用是形成包结物最重要的的作用力之一。     

二甲基甲酰胺中四种钕盐的电导

通过电导测量研究了四种钕盐：Nd(CF3SO3)3、Nd(ClO4)3、Nd(NO3)3和NdCl3在极性非质子溶剂DMF中的电导性质.利用线性拟合方法求得在25 ℃下Nd(CF3SO3)3和Nd(ClO4)3的极限摩尔电导率分别为278.8和 280.7 S•cm2•mol－1.用间接方法求得Nd(NO3)3 与NdCl3 的极限摩尔电导率分别为297.2和287.3 S•cm2 •mol－1.在25～65 ℃温度范围内，Nd(CF3SO3)3和Nd(ClO4)3的电导率随温度呈线性变化. Nd(NO3)3和NdCl3的电导行为表现出明显的离子缔合.     

Kinetics and Mechanism of the Cerium(IV) Oxidation of Arnold's Base and the Protonation and Hydroxylation of Michler's Hydrol Blue

In aqueous H₂SO₄, Ce(IV) ion oxidizes rapidly Arnold's base((p-Me₂NC₆H₄)₂CH₂, Ar₂CH₂) to the protonated species of Michler's hydrol((p-Me₂NC₆H₄)₂CHOH, Ar₂CHOH) and Michler's hydrol blue((p-Me₂NC₆H₄)₂CH⁺, Ar₂CH⁺). With Ar₂CH₂ in excess, the rate law of the Ce(IV)-Ar₂CH₂ reaction in 0.100 M H₂SO₄ is expressed -d[Ce(IV)]/dt = k_app[Ar₂CH₂]₀[Ce(IV)] with k_app = 199 ± 8M^?1s^?1 at25°C. When the consumption of Ce(IV) ion is nearly complete, the characteristic blue color of Ar₂CH⁺ ion starts to appear; later it fades relatively slowly. The electron transfer of this reaction takes place on the nitrogen atom rather than on the methylene carbon atom. The dissociation of the binuclear complex [Ce(III)ArCHAr-Ce(III)] is responsible for the appearance of the Ar₂CH⁺ dye whereas the protonation reaction causes the dye to fade. In highly acidic solution, the rate law of the protonation reaction of Michler's hydrol blue is -d[Ar₂CH⁺]/dt = k_obs[Ar₂CH⁺] where K_obs = ((ac + 1)[H*] + bc[H⁺]²)/(a + b[H⁺]) (in HClO₄) and k_obs= ((ac + 1 + e[HSO₄^?])[H⁺] + bc[H⁺]² + d[HSO₄^?] + q[HSO₄^?]²/[H⁺])/(a + b[H⁺] + f[HSO₄^?] + g[HSO₄^?]/[H⁺]) (in H₂SO₄), and at 25°C and μ = 0.1 M, a = 0.0870 M s, b = 0.655 s, c = 0.202 M^?1s^?1, d = 0.110, e = 0.0070 M^?1, f = 0.156 s, g = 0.156 s, and q = 0.124. In highly basic solution, the rate law of the hydroxylation reaction of Michler's hydrol blue is -d[Ar₂CH⁺]/dt = k_OH[OH^?]₀[Ar₂CH⁺] with k_OH = 174 ± 1 M^?1s^?1 at 25°C and μ = 0.1 M. The protonation reaction of Michler's hydrol blue takes place predominantly via hydrolysis whereas its hydroxylation occurs predominantly via the path of direct OH attack.     

橡胶增韧环氧树脂机理的研究

本文研究了固化剂种类、环氧基体平均网链长度和分散相与基体间键合情况对体系韧性等的影响.结果说明,基体平均网链长度是一个更为重要的影响因素.分散相与基体间的化学键合也是重要的.文中对橡胶增韧环氧树脂的机理提出了见解.在交联密度较低的材料中,在橡胶颗粒附近叠加的应力场诱发下发生纵深度较大的断裂过程.分散相与基体间的化学键合增大该应力场强度有利于加大断裂过程区.     

物理老化对聚苯基单醚喹啉薄膜银纹化的影响

物理老化实质上是聚合物材料在 Tg 以下存放过程中 ,其凝聚态结构通过链段或更小运动单元的运动 ,从热力学非平衡态向平衡态过渡的一个结构弛豫过程[1] .在这一过程中 ,聚合物的密度、自由体积、焓、熵和力学性质随温度和时间产生变化 .因为银纹化是聚合物的特性 ,所以银纹化也将随结构回复过程而产生变化 .有关物理老化对聚合物银纹化的影响尚未得出一致的结论 [2～ 4 ] .聚苯基单醚喹啉 (结构见 Scheme1 )是一种高性能的芳杂环聚合物 [5] ,它可以在比较苛刻的条件下作为绝缘材料和膜材料使用 .有关这类高性能的芳杂环聚合物的物理老化…     

二碘化钐作用下缺电子烯烃的还原偶联反应

室温下SmI2-HMPA-t-BuOH-THF体系能顺利地将丁烯二酸二酯还原偶联为1, 2, 3, 4-四烷氧基羰基丁烷, 同样条件下, 亚苄基氰乙酸乙酯,α-乙氧羰基肉桂酸乙酯, α-乙酰基肉桂酸乙酯和亚苄基丙二酸亚异丙酯等化合物也发生还原偶联反应得到相应的二聚体。     

CHIP-mediated hyperubiquitylation of tau promotes its self-assembly into the insoluble tau filaments

The tau protein is a highly soluble and natively unfolded protein. Under pathological conditions, tau undergoes multiple post-translational modifications (PTMs) and conformational changes to form insoluble filaments, which are the proteinaceous signatures of tauopathies. To dissect the crosstalk among tau PTMs during the aggregation process, we phosphorylated and ubiquitylated recombinant tau in vitro using GSK3β and CHIP, respectively. The resulting phospho–ub-tau contained conventional polyubiquitin chains with lysine 48 linkages, sufficient for proteasomal degradation, whereas unphosphorylated ub-tau species retained only one–three ubiquitin moieties. Mass-spectrometric analysis of in vitro reconstituted phospho–ub-tau revealed seven additional ubiquitylation sites, some of which are known to stabilize tau protofilament stacking in the human brain with tauopathy. When the ubiquitylation reaction was prolonged, phospho–ub-tau transformed into insoluble hyperubiquitylated tau species featuring fibrillar morphology and in vitro seeding activity. We developed a small-molecule inhibitor of CHIP through biophysical screening; this effectively suppressed tau ubiquitylation in vitro and delayed its aggregation in cultured cells including primary cultured neurons. Our biochemical findings point to a “multiple-hit model,” where sequential events of tau phosphorylation and hyperubiquitylation function as a key driver of the fibrillization process, thus indicating that targeting tau ubiquitylation may be an effective strategy to alleviate the course of tauopathies.

Multiple-hit model for tau aggregation, where sequential events of tau phosphorylation and hyperubiquitylation function as a key driver of the fibrillization process.