Laser-induced site-selective silver seeding on polyimide for electroless copper plating

Ag particles were generated on Ag⁺-doped polyimide film by laser direct writing, followed by selective copper deposition using the metallic silver particles as seeds. Laser irradiation caused in situ reduction and agglomeration of silver on the polyimide film. The copper lines were less uniform and compact with higher scanning velocity and the width of the deposited copper line could reach 25 μm. Equations of the relationship between scanning velocity and connectivity of the deposited copper patterns have been derived. The process was characterised by AFM, XPS, SEM, and semiconductor characterisation system.     

Synthesis of a Novel Aromatic Diamino-bridged Bis（β-cyclodextrin） and its Inclusion Complexation with Dyes Molecules

Bridged bis(β-cyclodextrin)s (CDs), as a very important family of CD derivatives, have been known that they can significantly alter the molecular binding ability and selectivity toward a variety of guests in comparison with parent cyclodextrin. Their two…     

现代优化计算方法在蛋白质结构预测中的应用

现代优化计算方法在蛋白质结构预测中占有重要地位.简要地介绍了模拟退火算法,遗传算法,人工神经网络和图论算法在蛋白质结构预测中的应用.对国内外近年来应用这些算法,特别是在蛋白质构象搜索问题中,解决蛋白质结构预测的研究作了回顾,并分析、比较了这几种算法的效果和特点.     

MORPHOLOGY OF BLACK CARBON AEROSOLS AND UBIQUITY OF 50-NANOMETER BLACK CARBON AEROSOLS IN THE ATMOSPHERE

Different-sized aerosols were collected by an Andersen air sampler to observe the detailed morphology of the black carbon （BC） aerosols which were separated chemically from the other accompanying aerosols, using a Scanning Electron Microscope equipped with an Energy Dispersive X-ray Spectrometer （SEM-EDX）. The results indicate that most BC aerosols are spherical particles of about 50 nm in diameter and with a homogeneous surface. Results also show that these particles aggregate with other aerosols or with themselves to form larger agglomerates in the micrometer range. The shape of these 50-nm BC spherical particles was found to be very similar to that of BC particles released from petroleum-powered vehicular internal combustion engines. These spherical BC particles were shown to be different from the previously reported fullerenes found using Matrix-Assisted Laser Desorption/Ionization Time-Of-Flight Mass Spectrometry （MALDI-TOF-MS）.     

Liquid phase oxidation of p-chlorotoluene to p-chlorobenzaldehyde over cobalt-doped mesoporous titania with a crystalline framework

Cobalt-doped mesoporous titania with a crystalline framework synthesized by surfactant templating method presented highly selective (99%) and reasonable conversion rate (49%) of catalytic oxidation of para-chlorotoluene to para-chlorobenzaldehyde in acetic acid using aqueous hydrogen peroxide as oxidant for the first time. Recycling of the catalyst indicates that the catalyst can be used a number of times without losing its activity to a greater extent. By contrast, cobalt-doped mesoporous titania without a crystalline structure and cobalt doped the commercial titania, Degussa P25 prepared by impregnation method with the similar concentration of cobalt were found inactive. The effects of catalyst concentration, reaction time, reaction temperature, and solvents on the performance of the catalyst were also investigated.     

A study of the effect of ZrO2 on the magnetic properties of FePt/ZrO2 multilayer

Fe_xPt_100−x(30 nm) and [Fe_xPt_100−x(3 nm)/ZrO₂]₁₀ (x = 37, 48, 57, 63, 69) films with different ZrO₂ content were prepared by RF magnetron sputtering technique, then were annealed at 550 °C for 30 min. This work investigates the effect of ZrO₂ doping on the microstructural evolution, magnetic properties, grain size, as well as the ordering kinetics of FePt alloy films. The as-deposited films behaved a disordered state, and the ordered L1₀ structure was obtained by post-annealing. The magnetic properties of the films are changed from soft magnetism to hard magnetism after annealing. The variation of the largest coercivities of [Fe_xPt_100−x/ZrO₂]₁₀ films with the Fe atomic percentage, x and differing amounts of ZrO₂ content reveals that as we increase the ZrO₂ content we must correspondingly increase the amount of Fe. This phenomenon suggests that the Zr or O atoms of ZrO₂ preferentially react with the Fe atoms of FePt alloy to form compounds. In addition, introducing the nonmagnetic ZrO₂ can reduce the intergrain exchange interactions of the FePt/ZrO₂ films, and the interactions are decreased as the ZrO₂ content increases, the dipole interactions are observed in FePt/ZrO₂ films as the ZrO₂ content is more than 15%.     

Measurements of AIM for Visible Wavelength Based on Individual Eye Model

We measure and calculate the aerial image modulation （AIM） of human retina for visible wavelengths based on the individual eye model. By employing the optical design software ZEMAX, we obtain the modulation transfer function （MTF） of human eye in visible wavelengths. Using CSV-1000 and VAF-1000, the contrast sensitivity function （CSF） and the visual acuity （VA） for the same eye are measured. Then the AIM of human retina could be acquired by the relations between MTF and CSF and between MTF and VA. The AIM of human retina is independent of MTF, and the values of AIM for normal eyes （without retina disease） are similar, so the assembly average for large numbers of normal eyes can be a standard AIM curve, which is helpful for the diagnosis of diseases in the retina system.     

On Polynomial Functions over Finite Commutative Rings

Let R be an arbitrary finite commutative local ring. In this paper, we obtain a necessary and sufficient condition for a function over R to be a polynomial function. Before this paper, necessary and sufficient conditions for a function to be a polynomial function over some special finite commutative local rings were obtained.     

Representation surfaces of Young''s modulus and Poisson''s ratio for BCC transition metals

 The general expressions for the compliance , Young's modulus E(h k l) and Poisson's ratio υ(h k l) along an arbitrary direction [h k l] are given for cubic crystals. The representation surfaces, for which the length of the radius vector in the [h k l] direction equals to E(h k l) or υ(h k l), are constructed for seven BCC transition metals Cr, Fe, Mo, Nb, Ta, V and W. Neglecting W, which is isotropic, both representation surfaces of Young's modulus and Poisson's ratio are spherical surfaces. The remaining BCC transition metals may be grouped into two classes. In the first group (Cr, Mo, Nb and V) with negative values of s_A, Young's modulus surface has eight depressed corners and six rounded protuberances at the centers of the faces. In the second group (Fe and Ta) with positive values of s_A, on the contrary, Young's modulus surface has eight rounded protuberance corners and six depressions at the centers of the faces. The contrary conclusions are obtained for Poisson's ratio.