The work of ISO-REMCO’s accreditation task group

This paper discusses some of the work of ISO-REMCO’s Task Group 4 (TG4) – the Accreditation TG, giving firstly a brief account of the recently published ISO Guide 34 – which gives guidance on the type of quality system a reference material producer should have in place. Secondly, work on the future development of Guide 34 to produce a document against which it will be possible for producers to be accredited without reference to ISO Guide 25 is discussed, and thirdly, the possible formation of an international register of CRM producers, which will provide users with information about the quality status of different producers, is considered.     

The Effect of Solute Concentration on Equilibrium Partitioning in Polymeric Gels

The effect of solute concentration on the equilibrium partitioning of sphere-like, colloidal solutes in stiff polymer hydrogels is examined theoretically and experimentally. The theoretical development is a statistical mechanics approach, and allows quantitative calculations to be performed to determine the concentration-dependent partition coefficient correct to first order in solute concentration at specific surface charge densities. The theory predicts that repulsive steric and/or electrostatic solute-fiber interactions exclude solute from the gel phase, but that repulsive solute-solute interactions cause partitioning into the gel to increase with increasing solute concentration. These trends are enhanced for larger solutes, increased fiber volume fractions, or stronger electrostatic repulsion. Partition coefficients have also been measured for two proteins, bovine serum albumin (BSA) and alpha-lactalbumin (ALA), in a system consisting of a salt solution and cubes of agarose hydrogel. To investigate the effect of electrostatic interactions, the experiments were performed at 0.15 M KCl and 0.01 M KCl. The theory underpredicts the strong electrostatic repulsion between BSA macromolecules at the lower ionic strength. The experimental results for ALA show the influence of an attractive interaction between the protein macromolecules, in addition to hard-sphere repulsive and electrostatic interactions. Copyright 2001 Academic Press.     

6- and 7-aryl-1,2,4-triazolo[4,3-b]-1,2,4-triazines. Synthesis and characterization

Synthetic methods for the preparation of 6-aryl-1,2,4-triazolo[4,3-b]-1,2,4-triazines ( 1 ) and the 7-aryl isomers ( 2 ) are described. Compounds 1 were prepared from aryl glyoxaldoximes 76 via 6-aryl-1,2,4-triazin-3(2H)ones ( 75 ). A simple procedure for the preparation of the 7-aryl isomers was effected using arylglyoxals 11 and the triazoles ( 4, 12a and 12b ). However, complete regioselectivity was not realized in all cases, especially when the triazoles were substituted at the C-5 position. A regiospecific synthesis of the 7-aryl isomers 2 was developed via the 3-methylthio-5-aryl-1,2,4-triazines ( 61 ). The structure of the parent 6-phenyl derivative 5 was confirmed by x-ray crystallography.     

Directed assembly of Au nanoparticles onto planar surfaces via multiple hydrogen bonds

We have developed a new concept to effect nanoparticle binding on surfaces by use of directed, specific molecular interactions. Hamilton-type receptors displaying a binding strength of approximately 10(5) M(-)(1) were covalently fixed onto self-assembled monolayers via Sharpless-type "click" reactions, thus representing an efficient method to control the densities of ligands over a range from low to complete surface coverage. Au nanoparticles covered with the matching barbituric acid receptors bound with high selectivity onto this surface by a self-assembly process mediated by multiple hydrogen bonds. The binding process was investigated with atomic force microscopy. Moderate control of particle density was achieved by controlling the receptor density on the self-assembled monolayer surface. The method opens a general approach to nanoparticle and small object binding onto patterned surfaces.     

Isotope fractionation of water during evaporation without condensation

The microscopic events engendering liquid water evaporation have received much attention over the last century, but remain incompletely understood. We present measurements of isotope fractionation occurring during free molecular evaporation from liquid microjets and show that the isotope ratios of evaporating molecules exhibit dramatic differences from equilibrium vapor values, strong variations with the solution deuterium mole fraction, and a clear temperature dependence. These results indicate the existence of an energetic barrier to evaporation and that the evaporation coefficient of water is less than unity. These new insights into water evaporation promise to advance our understanding of the processes that control the formation and lifetime of clouds in the atmosphere.     

IR laser absorption diagnostic for C2H4 in shock tube kinetics studies

An IR laser absorption diagnostic has been further developed for accurate and sensitive time‐resolved measurements of ethylene in shock tube kinetic experiments. The diagnostic utilizes the P14 line of a tunable CO₂ gas laser at 10.532 μm (the (0 0 1) → (1 0 0) vibrational band) and achieves improved signal‐to‐noise ratio by using IR photovoltaic detectors and accurate identification of the P14 line via an MIR wavemeter. Ethylene absorption cross sections were measured over 643–1959 K and 0.3–18.6 atm behind both incident and reflected shock waves, showing evident exponential decay with temperature. Very weak pressure dependence was observed over the pressure range of 1.2–18.6 atm. By measuring ethylene decomposition time histories at high‐temperature conditions (1519–1895 K, 2.0–2.8 atm) behind reflected shocks, the rate coefficient of the dominant elementary reaction C₂H₄ + M → C₂H₂ + H₂ + M was determined to be k₁ = (2.6 ± 0.5) × 10¹⁶exp(?34,130/T, K) cm³ mol^?1 s^?1 with low data scatter. Ethylene concentration time histories were also measured during the oxidation of 0.5% C₂H₄/O₂/Ar mixtures varying in equivalence ratio from 0.25 to 2. Initial reflected shock conditions ranged from 1267 to 1440 K and 2.95 to 3.45 atm. The measured time histories were compared to the modeled predictions of four ethylene oxidation mechanisms, showing excellent agreement with the Ranzi et al. mechanism (updated in 2011). This diagnostic scheme provides a promising tool for the study and validation of detailed hydrocarbon pyrolysis and oxidation mechanisms of fuel surrogates and realistic fuels. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 423–432, 2012     

Aerodynamic optimization of the flat-plate leading edge for experimental studies of laminar and transitional boundary layers

This work is concerned with the design of a leading edge for a flat-plate model used to study laminar and transitional boundary layers. For this study, the flow over the complete boundary-layer model, including leading edge, flat section, and trailing-edge flap, is modeled. The effect of important geometrical features of the leading edge on the resulting pressure distribution, starting from the well-known symmetric modified super ellipse, is investigated. A minimal pressure gradient on the measurement side of the plate is achieved using an asymmetrical configuration of modified super ellipses, with a thickness ratio of 7/24. An aerodynamic shape optimization is performed to obtain a novel leading edge shape that greatly reduces the length of the non-zero pressure gradient region and the adverse pressure gradient region compared to geometries defined by ellipses. Wind tunnel testing is used to validate the numerical solutions.     

Collapse transition and asymptotic scaling behavior of lattice animals: Low-temperature expansion

A low-temperature expansion for the free energy density of lattice animals is derived. Analysis of the series yields a collapse transition temperature ofT _c - 0.54, in close agreement with previous estimates. It is demonstrated that _p,k, the number ofp-particle,p-bond animals, obeys the asymptotic scaling law log _p,k pg(k/p) + o(p). The low-temperature series and numerical data are used to estimate the scaling function.     

Echo planar imaging of perfluorocarbons

Emulsions of perfluorotributylamine (FTBA) and perflubron were evaluated for their utility in ¹⁹F echo planar imaging. Fluorine images of the emulsions were obtained in a phantom and two mice that had been predosed. Both agents, but particularly perflubron, show potential for fluorine echo planar studies because of the long spin-spin relaxation times of the CF₃ resonances. High resolution thin slice images obtained in as little as 26.6 ms are presented.