1-Ethyl-1,4-dihydro-4-oxo-7-(pyridinyl)-3-quinolinecarboxylic acids. I. Synthesis of 3- and 4-(3-aminophenyl)pyridine intermediates

A series of substituted 3- and 4-(3-aminophenyl)pyridines has been prepared as intermediates for the synthesis of some 1-alkyl-1,4-dihydro-4-oxo-7-pyridinyl-3-quinolinecarboxylic acids. The Hantzsch, Hauser and other pyridine syntheses were used. 4-(3-Aminophenyl)pyridine was prepared via 3-(4-pyridinyl)-2-cyclohexen-1-one using the Semmler-Wolff reaction.     

Effects of different alkali metal ions on the cationization of poly(ethylene glycol)s in matrix-assisted laser desorption/ionization mass spectrometry: a new selectivity parameter

The cationization of poly(ethylene glycol)s, PEG 4000 and PEG 6000, under matrix-assisted laser desorption/ionization conditions was studied by using different concentration ratios of the sodium ion, as the reference ion, and another alkali metal ion (Li(+), K(+), Rb(+), Cs(+)). A linear correlation was found between the intensity ratio of the sodiated PEGs and PEGs cationized with alkali metal ions versus the initial concentration ratio of sodium and alkali metal ions. The slopes of these straight lines are proposed as a novel selectivity ratio for the ionization process. The intensity distribution of the cationized PEGs was also investigated. It was found that the cationized oligomers follow Poisson statistics. The M(n) and M(w) values were also evaluated. An explanation for the observed effects is given.     

Understanding the conformational dependence of spin-spin coupling constants: through-bond and through-space J(31P,31P) coupling in tetraphosphane-1,4-diides [M(L)x]2[P4R4

The characteristic dependence of J(31P,31P) spin-spin coupling constants of alkali metal tetraphosphane-1,4-diides on structure and composition has been analyzed by density functional methods. The computations confirm that the structure of the contact ion pairs is conserved in solution. Calculations on model systems M2P4H4, on naked P4H4(2-) anions, and on models including point charges, show that the role of the cations is mainly structural and to a smaller extent electrostatic. Three of the four J(P,P) coupling constants depend characteristically on the conformation of the anion, which in turn is determined by the substituents R and by cation-anion interactions. Several couplings exhibit a large through-space component and are thus strongly dependent on the relative orientation of nonbonding electron pairs on the phosphorus atoms involved. This is shown by visualization of coupling pathways using the recently introduced coupling energy density (CED), in combination with the electron localization function (ELF).     

Nitrogen bridgehead compounds. Part 35. Structures of α-formyl-2,3-polymethylene-3,4-dihydroquinazolin-4-ones

The structures of the title compounds bearing a five-, six- or seven-membered A ring have been investigated by uv and ¹H and ¹³C nmr spectroscopy. The imine-enol-enamine (I-II-III) tautomerism of these compounds depends greatly on the ring size. A significant solvent-dependence is observed only for the five-membered-ring compounds 1 and 2 , which in ethanolic solution exist predominantly in the imine form I, and in chloroform solution in the enol form II. The compounds with a six-membered A ring, 3 and 4 , are mainly in the enamine form III. On protonation, 3 and 4 change into the E and Z isomeric mixture of the enol tautomer II. The seven-membered-ring compound 5 is a mixture of the imine I and the enamine III tautomers.     

Adventages and limits on usage of thermal methods in complex systems

In order to increase the nutrition value of bread, one of the most commonly used foodstuff all over the world, different additives are used in bread processing. In this paper we describe the thermal changes in bread and that of with 0.5% crude soybean lecithin additive. Their thermal stability has been investigated by TG, DSC and EGD methods. The thermal changes were also followed of soy products, lecithin and lysine, ingredients used as bread additives in order to check if they may suffer any thermal degradation during the baking process. The data obtained can be of use only for qualitative conclusions. According to the obtained data at the usual bread baking temperature only the additives in crust may partly decompose while in the crumb, at lower temperatures the additives, due to baking, are not damaged. The thermal methods give a possibility for rapid estimation of processes induced by heat effects in additives during the baking, and they are suitable to detect the changes during the bread-making procedure. However, they are neither suitable to provide any quantitative data on these changes nor facts affecting the nutrition value and of the bread.     

Structural analysis of 2,6-[bis(alkyloxy)methyl]-phenyltin derivatives using electrospray ionization mass spectrometry

Electrospray ionization (ESI) mass spectrometry was applied to the structural analysis of 23 2,6-[bis(alkyloxy)methyl]phenyltin(IV) derivatives. The mass spectra were measured in both polarity modes and multistage tandem mass spectrometric (MS(n)) measurements were performed on the ion trap analyser for positively charged tin-containing ions. The sum of complementary ions observed in the positive-ion mode (i.e. [M-R(3)](+) ion) and in the negative-ion mode (i.e. [R(3)](-) ion) permits molecular mass determination in spite of the fact that the molecular adducts were often missing even in the first-order mass spectra. The subsequent fragmentation of [M-R(3)](+) ions studied by MS(n) and the correlation of observed fragment ions with the expected structures of synthesized organotin(IV) compounds allowed us to understand the fragmentation behaviour and the mechanism of the ion formation for studied compounds. The typical neutral losses are alkenes, alcohols and aldehydes. The fragmentation pattern of one selected compound was supported by MS(n) measurements of an isotopically labelled analogue to confirm unusual ion-molecule reactions of some fragment ions with water in the ion trap.     

Fused isoquinolines: 3-aryl-2,3,4,5-tetrahydro-1H-pyrrolo[2,3-c]isoquinoline-1,5-dione-2-spiro-4′-(1′-alkyl-1′,4′-dihydropyridine)s

Previously unknown 3-arylamino-1,2-dihydro-1-isoquinolones were obtained by condensation of 2-cyanomethylbenzoic acid with arylamines. Isonicotinoylation of the compounds was shown to proceed at the carbon atom in the 4-position to give 3-arylamino-4-isonicotinoyl-1,2-dihydro-1-isoquinolones which were quaternized with alkylating agents and formed the corresponding pyridinium salts. Deprotonation of the latter induced intramolecular conjugated addition with the pyrrole ring closure and formation of spiro compounds. The structure of the products was confirmed by NMR, IR and UV spectroscopy and by synthesis of the model compound, 3-(4-tolyl)-2,3,4,5-tetrahydro-1H-pyrrolo[2,3-c]isoquinoline-1,5-dione.     

Dehydrogenation of ethylbenzene with nitrous oxide in the presence of mesoporous silica materials modified with transition metal oxides

The novel mesoporous templated silicas (MCM-48, SBA-15, MCF, and MSU) were used as supports for transition metal (Cu, Cr, or Fe) oxides. The catalysts were synthesized using the incipient wetness impregnation, and characterized by low-temperature N2 sorption, DRIFT, photoacoustic IR spectroscopy, UV-vis diffuse reflectance spectroscopy, and temperature-programmed desorption of ammonia. It was shown that the preparation method used results in different distributions and dimensions of the transition metal oxide clusters on the inert support surface. The prepared catalysts were tested in the reaction of oxidative dehydrogenation of ethylbenzene in the presence of nitrous oxide. The iron-containing catalysts showed the highest catalytic activity. The presence of isolated Fe3+ was found to be the most important factor influencing the ethylbenzene conversion. The undesirable effect of the increase in selectivity toward CO2 was observed for the samples with the highest concentrations of acidic surface sites.     

Functional analogues of the dioxygen reduction site in cytochrome oxidase: mechanistic aspects and possible effects of Cu(B)

Catalytic reduction of O(2) and H(2)O(2) by new synthetic analogues of the heme/Cu site in cytochrome c and ubiquinol oxidases has been studied in aqueous buffers. Among the synthetic porphyrins yet reported, those employed in this study most faithfully mimic the immediate coordination environment of the Fe/Cu core. Under physiologically relevant conditions, these biomimetic catalysts reproduce key aspects of the O(2) and H(2)O(2) chemistry of the enzyme. When deposited on an electrode surface, they catalyze the selective reduction of O(2) to H(2)O at potentials comparable to the midpoint potential of cytochrome c. The pH dependence of the half-wave potentials and other data are consistent with O-O bond activation at these centers proceeding via a slow generation of a formally ferric-hydroperoxo intermediate, followed by its rapid reduction to the level of water. This kinetics is analogous to that proposed for the O-O reduction step at the heme/Cu site. It minimizes the steady-state concentration of the catalytic intermediate whose decomposition would release free H(2)O(2). The maximum catalytic rate constants of O(2) reduction by the ferrous catalyst and of H(2)O(2) reduction by both ferric and ferrous catalysts are comparable to those reported for cytochrome oxidase. The oxidized catalyst also displays catalase activity. Comparison of the catalytic properties of the biomimetic complexes in the FeCu and Cu-free forms indicates that, in the regime of rapid electron flux, Cu does not significantly affect the turnover frequency or the stability of the catalysts, but it suppresses superoxide-releasing autoxidation of an O(2)-catalyst adduct. The distal Cu also accelerates O(2) binding and minimizes O-O bond homolysis in the reduction of H(2)O(2).     

Transition Metal Complexes with Pyrazole-based Ligands. Part 12. Characterisation and thermal decomposition of CuCl2 complexes with di- and trisubstituted pyrazoles

The synthesis of copper(II) chloride complexes with 3,5-dimethylpyrazole, 1-carboxamidine-3,5-dimethylpyrazole, 5-amino-4-carboxamide-1-phenylpyrazole and 4-acetyl-3-amino-5-methylpyrazole is described. The compounds are characterized by elemental analysis, FT-IR spectroscopy, thermal methods, magnetic moment and molar conductivity measurements. Thermal decomposition of the dichloro-(3,5-dimethylpyrazole)-copper(II) complex results in an unstable intermediate with a stochiometric composition. The decomposition of the other compounds is continuous. This revised version was published online in August 2006 with corrections to the Cover Date.