Structural analysis of 2,6-[bis(alkyloxy)methyl]-phenyltin derivatives using electrospray ionization mass spectrometry

Electrospray ionization (ESI) mass spectrometry was applied to the structural analysis of 23 2,6-[bis(alkyloxy)methyl]phenyltin(IV) derivatives. The mass spectra were measured in both polarity modes and multistage tandem mass spectrometric (MS(n)) measurements were performed on the ion trap analyser for positively charged tin-containing ions. The sum of complementary ions observed in the positive-ion mode (i.e. [M-R(3)](+) ion) and in the negative-ion mode (i.e. [R(3)](-) ion) permits molecular mass determination in spite of the fact that the molecular adducts were often missing even in the first-order mass spectra. The subsequent fragmentation of [M-R(3)](+) ions studied by MS(n) and the correlation of observed fragment ions with the expected structures of synthesized organotin(IV) compounds allowed us to understand the fragmentation behaviour and the mechanism of the ion formation for studied compounds. The typical neutral losses are alkenes, alcohols and aldehydes. The fragmentation pattern of one selected compound was supported by MS(n) measurements of an isotopically labelled analogue to confirm unusual ion-molecule reactions of some fragment ions with water in the ion trap.     

Fused isoquinolines: 3-aryl-2,3,4,5-tetrahydro-1H-pyrrolo[2,3-c]isoquinoline-1,5-dione-2-spiro-4′-(1′-alkyl-1′,4′-dihydropyridine)s

Previously unknown 3-arylamino-1,2-dihydro-1-isoquinolones were obtained by condensation of 2-cyanomethylbenzoic acid with arylamines. Isonicotinoylation of the compounds was shown to proceed at the carbon atom in the 4-position to give 3-arylamino-4-isonicotinoyl-1,2-dihydro-1-isoquinolones which were quaternized with alkylating agents and formed the corresponding pyridinium salts. Deprotonation of the latter induced intramolecular conjugated addition with the pyrrole ring closure and formation of spiro compounds. The structure of the products was confirmed by NMR, IR and UV spectroscopy and by synthesis of the model compound, 3-(4-tolyl)-2,3,4,5-tetrahydro-1H-pyrrolo[2,3-c]isoquinoline-1,5-dione.     

Dehydrogenation of ethylbenzene with nitrous oxide in the presence of mesoporous silica materials modified with transition metal oxides

The novel mesoporous templated silicas (MCM-48, SBA-15, MCF, and MSU) were used as supports for transition metal (Cu, Cr, or Fe) oxides. The catalysts were synthesized using the incipient wetness impregnation, and characterized by low-temperature N2 sorption, DRIFT, photoacoustic IR spectroscopy, UV-vis diffuse reflectance spectroscopy, and temperature-programmed desorption of ammonia. It was shown that the preparation method used results in different distributions and dimensions of the transition metal oxide clusters on the inert support surface. The prepared catalysts were tested in the reaction of oxidative dehydrogenation of ethylbenzene in the presence of nitrous oxide. The iron-containing catalysts showed the highest catalytic activity. The presence of isolated Fe3+ was found to be the most important factor influencing the ethylbenzene conversion. The undesirable effect of the increase in selectivity toward CO2 was observed for the samples with the highest concentrations of acidic surface sites.     

Functional analogues of the dioxygen reduction site in cytochrome oxidase: mechanistic aspects and possible effects of Cu(B)

Catalytic reduction of O(2) and H(2)O(2) by new synthetic analogues of the heme/Cu site in cytochrome c and ubiquinol oxidases has been studied in aqueous buffers. Among the synthetic porphyrins yet reported, those employed in this study most faithfully mimic the immediate coordination environment of the Fe/Cu core. Under physiologically relevant conditions, these biomimetic catalysts reproduce key aspects of the O(2) and H(2)O(2) chemistry of the enzyme. When deposited on an electrode surface, they catalyze the selective reduction of O(2) to H(2)O at potentials comparable to the midpoint potential of cytochrome c. The pH dependence of the half-wave potentials and other data are consistent with O-O bond activation at these centers proceeding via a slow generation of a formally ferric-hydroperoxo intermediate, followed by its rapid reduction to the level of water. This kinetics is analogous to that proposed for the O-O reduction step at the heme/Cu site. It minimizes the steady-state concentration of the catalytic intermediate whose decomposition would release free H(2)O(2). The maximum catalytic rate constants of O(2) reduction by the ferrous catalyst and of H(2)O(2) reduction by both ferric and ferrous catalysts are comparable to those reported for cytochrome oxidase. The oxidized catalyst also displays catalase activity. Comparison of the catalytic properties of the biomimetic complexes in the FeCu and Cu-free forms indicates that, in the regime of rapid electron flux, Cu does not significantly affect the turnover frequency or the stability of the catalysts, but it suppresses superoxide-releasing autoxidation of an O(2)-catalyst adduct. The distal Cu also accelerates O(2) binding and minimizes O-O bond homolysis in the reduction of H(2)O(2).     

Estimating the PDMS-Coated, SPME-Fibre/Water- and Fibre/Gas-Partition Coefficients of Chlorinated Ethenes by Headspace-SPME

In this work, a simple, fast and reproducible method is presented for the determination of fibre/liquid-phase and fibre/gas-phase partition coefficients of five chlorinated ethenes on a poly-(dimethylsiloxane), PDMS-coated, solid-phase microextraction fibre, by employing a headspace HS-SPME coupled with gas chromatography. The partition coefficients were estimated by a numerical method using a Level-I fugacity method coupled with parameter-estimation software. Dimensionless partition coefficients between SPME fibre and liquid as well as gas phases were obtained at temperatures of 10 °C, 25 °C and 30 °C. The partition coefficients of the fibre and the gas phase, K _fg, increase with decreasing temperature by a factor of ≈2 to 6, and they are directly proportional to the linear slope of the regression line. The same tendency is observed for the partition coefficient of the fibre and liquid phase, K _fw, in a factor ≈1.2 to 2.0. The sorption enthalpy is higher in the gas phase; therefore, the sorption onto the fibre is favoured at lower temperatures. The correlation of the log K _ow versus log K _fw and log K _oa versus log K _fg shows a linear relationship with the number of chlorine atoms in the C = C molecule. Long-term experiments resulted in sorption to Teflon surfaces and possible losses in 43 mL vials, not observed in 250 mL Boston bottles.     

Efficiency assessment of wastewater treatment plant based on SPMD sampling

The efficiency of treatment processes forboth municipal and industrial wastewater (treatment plant-Ostrava, Czech Republic) focused on persistent organic pollutants (POPs) was assessed. Semipermeable membrane devices (SPMDs) as a sampling system were applied. Exposed SPMDs were analyzed both for chemical contaminants of POPs and toxicity response. The chemical analyses of PAHs were made by HPLC-FLD, PCDD/Fs and PCBs were analysed by GC/MS/MS on GCQ or PolarisQ (Thermoquest). Ecotoxicity data on chlorococcal alga Desmodesmus subspicatus (Scenedesmus subspicatus) and luminescent bacteria Vibrio fischeri are presented here. All toxicity data as effective volume Vtox are expressed. The results show good treatment ability of the treatment plant and proved used system as an appropriate tool for efficiency assessment of treatment and/or decontamination processes.     

New synthetic approach to substituted isoindolo[2,1-a]quinoline carboxylic acids via intramolecular Diels-Alder reaction of 4-(N-furyl-2)-4-arylaminobutenes-1 with maleic anhydride

Acylation of substituted 4-(furyl-2)-4-arylaminobut-1-enes with maleic anhydride provided 2-allyl-6-carboxy-4-oxo-3-aza-10-oxatricyclo[5.2.1.0^1,5]dec-8-enes in high yield under mild reaction conditions. The Diels-Alder adducts are formed via an initial amide formation followed by a stereoselective intramolecular [4+2] exo-cycloaddition reaction. Treatment of the tricyclic compounds with phosphoric acid at high temperatures (70-120 °C) promoted cyclic ether opening, intramolecular cyclization and aromatization to give the corresponding tetracyclic compounds, 5,6,6a,11-tetrahydro-10-carboxyisoindolo[2,1-a]quinolines, in moderate yields. The influence of the acid and the reaction temperature on the cyclization reactions are also discussed.     

Electron capture dissociation of polypeptides using a 3 Tesla Fourier transform ion cyclotron resonance mass spectrometer

Electron capture dissociation (ECD) of polypeptides has been demonstrated using a commercially available 3 Tesla Fourier transform ion cyclotron resonance (FTICR) instrument. A conventional rhenium filament, designed for high-energy electron impact ionisation, was used to effect ECD of substance P, bee venom melittin and bovine insulin, oxidised B chain. A retarding field analysis of the effective electron kinetic energy distribution entering the ICR cell suggests that one of the most important parameters governing ECD for this particular instrument is the need to employ low trapping plate voltages. This is shown to maximise the abundance of low-energy electrons. The demonstration of ECD at this relatively low magnetic field strength could offer the prospect of more routine ECD analysis for the wider research community, given the reduced cost of such magnets and (at least theoretically) the greater ease of electron/ion cloud overlap at lower field.     

Finite-size scaling for Potts models

Recently, Borgs and Kotecký developed a rigorous theory of finite-size effects near first-order phase transitions. Here we apply this theory to the ferromagneticq-state Potts model, which (forq large andd2) undergoes a first-order phase transition as the inverse temperature is varied. We prove a formula for the internal energy in a periodic cube of side lengthL which describes the rounding of the infinite-volume jumpE in terms of a hyperbolic tangent, and show that the position of the maximum of the specific heat is shifted by _m (L)=(Inq/E)L ^–d +O(L ^–2d ) with respect to the infinite-volume transition point _t . We also propose an alternative definition of the finite-volume transition temperature _t (L) which might be useful for numerical calculations because it differs only by exponentially small corrections from _t .     

Suppression of deleterious effects of free silanols in liquid chromatography by imidazolium tetrafluoroborate ionic liquids

Silica-based stationary phases are commonly used in liquid chromatography, but their surface acidity causes known problems, especially when separating basic compounds. Deleterious effects of free silanols are not fully removed by standard prevention procedures consisting in adding alkylamines or other amino quenchers to the eluents. We found that ionic liquids of the imidazolium tetrafluoroborate class, added to mobile phases at concentrations of 0.5-1.5% (v/v), blocked silanols and provided excellent thin-layer chromatographic separations of strongly basic drugs which were otherwise not eluted, even with neat acetonitrile as the mobile phase. The silanol suppressing potency of imidazolium tetrafluoroborates was demonstrated to markedly exceed that of the standard mobile phase additives, like triethylamine, dimethyloctylamine and ammonia. The proposed new mobile phase additives were also demonstrated to provide reliable lipophilicity parameters of base drug analytes as determined by gradient mode of high-performance liquid chromatography. By applying the readily available and environmentally friendly imidazolium tetrafluoroborate ionic liquids, simple and efficient means of improvement of liquid chromatographic analysis of organic bases were elaborated.