Dust-Acoustic Nonlinear Waves in a Nanoparticle Fraction of Ultracold (2K) Multicomponent Dusty Plasma

The nonlinear dust-acoustic instability in the condensed submicron fraction of dust particles in the low-pressure glow discharge at ultra-low temperatures is experimentally and theoretically investigated. The main discharge parameters are estimated on the basisof the dust-acoustic wave analysis. In particular, the temperature and density of ions, as well as the Debye radius, are determined. It is shown that the ion temperature exceeds the temperature of the neutral gas. The drift characteristics of all plasma fractions are estimated. The reasons for the instability excitation are considered.     

Noninvasive Temperature Measurement in Dental Materials Using Nd3+, Yb3+ Doped Nanoparticles Emitting in the Near Infrared Region

In this work, the application of near infrared (NIR)-emitting NaYbF₄:1%Tm³⁺@NaLuF₄:30%Nd³⁺ core–shell nanoparticles is reported for noninvasive probing and monitoring the temperature during photopolymerization of dental materials. When excited at 808 nm, the synthesized nanoparticles emit NIR photoluminescence (PL) with two distinctive peaks at 865 and 980 nm which correspond to radiative transitions from the doped Nd³⁺ and Yb³⁺ ions, respectively. Luminescence intensity ratio between these two bands is found to vary with temperature due to temperature-dependent electronic excitation energy transfer between Nd³⁺ and Yb³⁺ ions at the core/shell interface. This finding allows luminescence ratiometric evaluation of the in situ temperature during photopolymerization of resin cement (doped with nanoparticles) in a veneer placement procedure. In addition, the NIR emission also enables PL imaging of the distribution of the adhesive under the veneer. The results highlight that rare-earth ions–doped nanoparticles with both excitation and emission in the NIR spectral range are advantageous for both PL-based nanothermometry and imaging due to the reduced attenuation of NIR light by dental ceramics.     

Mode Localization Induced by a Nonlinear Control Loop

We present the analysis of a nonlinear controlsystem that is used to excite and maintain a specified amplitude ofoscillation in the Jet Propulsion Laboratory vibratory gyroscope.This experimental application shows that nonlinear localizationthrough active means can be implemented in a practical system when itis desirable to confine the response to a favorable mode. Theclosed-loop system response predicted by the model shows very closeagreement with the experimental results for a significant range ofcontroller parameters. We also experimentally demonstrate that theactively localized motion is eliminated through bifurcation, similarto what was observed in previous passive localization studies appliedto extended flexible oscillators.     

Polypeptide folding on a conformational‐space network: Dependence of network topology on the structural discretization procedure

Mapping the conformational space of a polypeptide onto a network of conformational states involves a number of subjective choices, mostly in relation to the definition of conformation and its discrete nature in a network framework. Here, we evaluate the robustness of the topology of conformational‐space networks derived from Molecular Dynamics (MD) simulations with respect to the use of different discretization (clustering) methods, variation of their parameters, simulation length and analysis time‐step, and removing high‐frequency motions from the coordinate trajectories. In addition, we investigate the extent to which polypeptide dynamics can be reproduced on the resulting networks when assuming Markovian behavior. The analysis is based on eight 500 ns and eight 400 ns MD simulations in explicit water of two 10‐residue peptides. Three clustering algorithms were used, two of them based on the pair‐wise root‐mean‐square difference between structures and one on dihedral‐angle patterns. A short characteristic path length and a power‐law behavior of the probability distribution of the node degree are obtained irrespective of the clustering method or the value of any of the tested parameters. The average cliquishness is consistently one or two orders of magnitude larger than that of a random realization of a network of corresponding size and connectivity. The cliquishness as function of node degree and the kinetic properties of the networks are found to be most dependent on clustering method and/or parameters. Although Markovian simulations on the networks reproduce cluster populations accurately, their kinetic properties most often differ from those observed in the MD simulations. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

Analysis of the temperature dependence of the high-frequency EMR spectra of Mn ions in the lithium-ion battery material LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript>

This paper deals with the analysis of the temperature dependence of high-frequency EMR (HF-EMR) spectra due to Mn³⁺ and Mn⁴⁺ ions in the lithium manganese spinel LiMn₂O₄. A range of powder samples obtained by the sol-gel method with calcinations in several temperature ranges were prepared for this study. Based on the initial characterization carried out by a number of techniques, the physicochemical and structural properties of the samples were earlier determined. Independently, temperature magnetization and HF-EMR measurements were carried out. The EMR spectra vary strongly between samples, indicating possible structural or chemical changes. Quantitative analysis of the temperature dependence of the HF-EMR spectra due to Mn³⁺ and Mn⁴⁺ ions in LiMn₂O₄ is presented in this paper. The spectral analysis concerns the line shape, linewidth, intensity and g-factors. Fittings using the Lorentzian spectral shape and, to a certain extent, the Gaussian spectral shape have been carried out in order to parameterize the temperature dependence of the HF-EMR spectra. This parameterization of the HF-EMR experimental data enables a deeper characterization of the samples. Subsequently, a better insight into the role of the Mn³⁺ and Mn⁴⁺ ions in accounting for the characteristics most suitable for application of LiMn₂O₄ as a cathode material may be gained.     

Spatial condensation of trapped polaritons in graphene and semiconductor structures

The theoretical and experimental status of the Bose–Einstein Condensation (BEC) of trapped quantum well (QW) polaritons in a microcavity is presented. The results of recent experiments that have shown the possibility to create an in-plane harmonic potential trap for a two-dimensional (2D) exciton polaritons in a cavity are discussed. We report the theory of BEC and of the trapped QW exciton polaritons in a microcavity. In addition, we study the BEC of trapped magnetoexciton polaritons in a graphene layer (GL) embedded in an optical microcavity in high magnetic field. In both cases the polaritons are considered to be in a harmonic potential trap. We compare the theoretical results with the existing experiments and discuss the experimental observation of predicted phenomena.     

AN EMBEDDED BOUNDARY METHOD FOR ELLIPTIC AND PARABOLIC PROBLEMS WITH INTERFACES AND APPLICATION TO MULTI-MATERIAL SYSTEMS WITH PHASE TRANSITIONS

The embedded boundary method for solving elliptic and parabolic problems in geometrically complex domains using Cartesian meshes by Johansen and Colella （1998, J. Comput. Phys. 147, 60） has been extended for elliptic and parabolic problems with interior boundaries or interfaces of discontinuities of material properties or solutions. Second order accuracy is achieved in space and time for both stationary and moving interface problems. The method is conservative for elliptic and parabolic problems with fixed interfaces. Based on this method, a front tracking algorithm for the Stefan problem has been developed. The accuracy of the method is measured through comparison with exact solution to a two-dimensional Stefan problem. The algorithm has been used for the study of melting and solidification problems.     

Observation of entanglement between two light beams spanning an octave in optical frequency

We have experimentally demonstrated how two beams of light separated by an octave in frequency can become entangled after their interaction in a chi;{(2)} nonlinear medium. The entangler was a nonlinear optical resonator that was strongly driven by coherent light at the fundamental and second-harmonic wavelengths. An interconversion between the fields created quantum correlations in the amplitude and phase quadratures, which were measured by two independent homodyne detectors. Analysis of the resulting correlation matrix revealed a wave function inseparability of 0.74(1)<1, thereby satisfying the criterion of entanglement.     

On-Surface Synthesis and Characterization of Acene-Based Nanoribbons Incorporating Four-Membered Rings

A bottom up method for the synthesis of unique tetracene-based nanoribbons, which incorporate cyclobutadiene moieties as linkers between the acene segments, is reported. These structures were achieved through the formal [2+2] cycloaddition reaction of ortho-functionalized tetracene precursor monomers. The formation mechanism and the electronic and magnetic properties of these nanoribbons were comprehensively studied by means of a multitechnique approach. Ultra-high vacuum scanning tunneling microscopy showed the occurrence of metal-coordinated nanostructures at room temperature and their evolution into nanoribbons through formal [2+2] cycloaddition at 475 K. Frequency-shift non-contact atomic force microscopy images clearly proved the presence of bridging cyclobutadiene moieties upon covalent coupling of activated tetracene molecules. Insight into the electronic and vibrational properties of the so-formed ribbons was obtained by scanning tunneling microscopy, Raman spectroscopy, and theoretical calculations. Magnetic properties were addressed from a computational point of view, allowing us to propose promising candidates to magnetic acene-based ribbons incorporating four-membered rings. The reported findings will increase the understanding and availability of new graphene-based nanoribbons with high potential in future spintronics.     

Reversible C=C Bond Activation by an Intramolecularly Coordinated Antimony(I) Compound

The reaction of N,C,N-chelated stibinidene ArSb ( 1 ) (Ar=C₆H₃-2,6-(CH=NtBu)₂) with selected N-alkyl/aryl-maleimides RN(C(O)CH)₂ (R=Me, tBu, Ph) gave the addition products with bridged bicyclic [2.2.1] structure containing an antimony atom at the bridgehead position, fused with a 6-membered benzene and a 5-membered N-alkyl/aryl-pyrrolidine ring. These compounds were completely characterized. More importantly, additional studies showed that these reactions are reversible in solution, thereby representing an unprecedented reversible activation of a C=C bond by an antimony(I) compound.