Untersuchungen zur elektrochemischen Simultanbestimmung von Blei und Zinn

Zusammenfassung Die starke Temperaturabhängigkeit des polarographischen Zinn(II/0)-Signals in Lösungen des vierwertigen Zinns ermöglicht bei –32° C in methanolischer salzsaurer Grundlösung die Bestimmung des Bleis neben hohem Zinnüberschuß. Eine Anwendung des Verfahrens zur wechselstrompolarographischen Bestimmung des Bleis in Rohzinn wird beschrieben.

---

Investigations on the simultaneous electrochemical determination of lead and tinII. Polarographic determination of lead in the presence of tin at lower temperatures

Summary The strong temperature dependence of the polarographic tin(II/0) signal in solutions containing tin(IV) renders possible the determination of lead in the presence of a high excess of tin at working temperatures of –32° C in hydrochloric methanol as supporting electrolyte solution. An application of the procedure to the ac-polarographic determination of lead in crude tin is described.

Die vorliegende Arbeit wurde in dankenswerter Weise durch Mittel der Deutschen Forschungsgemeinschaft und des Verbandes der Chemischen Industrie ermöglicht.     

Untersuchung der Komplexierung von Na+, K+, Ca2+ und Ba2+ mit einigen elektrisch neutralen Liganden durch Messung von 13C-chemischen Verschiebungen und Spin-Gitter-Relaxationszeiten

Investigation of the complexing of Na⁺, K⁺, Ca²⁺ and Ba²⁺ with some uncharged ligands by ¹³C-chemical shift and spin-lattice relaxation time measurements The influence of Na⁺, K⁺, Ca²⁺ and Ba²⁺ ions on ¹³C chemical shifts and on spin-lattice relaxation times of some electrically neutral ion carriers was investigated. In the solvents CD₃CN and CD₃OD and in presence of an excess of metal ions ligand 4 (see the Scheme) forms complexes of 1:1 stoichiometry. All four oxygen atoms of the ligand as well as solvent molecules take part in the coordination. In CDCl₃ as solvent, for all ions investigated except sodium, only 1:2 complexes (metal/ligand) were observed with 4 . Sodium ions form both 1:1 and 1:2 complexes in this solvent. In the 1:2 complexes of the investigated monovalent ions only one, in those of the divalent ions both amide carbonyl groups of ligand 4 take part in the coordination.     

On Excited States of Alkyl Bridged [14] Annulenes

The linear dichroic absorption spectrum of 1,3,6,8-trans-15, 16-hexamethyl-dihydropyrene has been measured in stretched polyethylene at 77K, and CNDO-CI calculations with inclusion of singly and doubly excited configurations have been carried out on a series of alkyl bridged [14] annulenes with pyrene- and anthracene-shaped perimeters. Transitions to e_3g → e_4u type ¹B states are well described, and the results indicate that additional low-energy excited states originate from e_3g→ e_5g and e_2u → e_4u type configurations interacting strongly with doubly excited configurations of the e_3g, e_3g → e_4u, e_4u type. The second excited singlet state responsible for the weak transition observed between the ¹L bands may be assigned to one of these additional states, but it is probably of complex nature, similar to the ‘phantom’ state in linear polyenes.     

On the exceptional reactivity of the norbornene double bond

The anomalous reactivity of the bicyclo [2.2.1] heptene double bond is interpreted in terms of hyperconjugative effects, leading to an exceptionally low endo out-of-plane deformation potential.     

Cooperative effects in binuclear zirconocenes: Their synthesis and use as catalyst in propene polymerization

The mono- and bis-cyclopentadienyl compounds 1-(Cp″)-4-(CH₃)C₆H₄ (1) and 1, 4-(Cp″)₂C₆H₄ (2) (Cp″ = 3,4-dimethylcyclopenta-1,3-diene-1-yl) have been synthesized. The reactions of the lithium salts of 1 and 2 with CpZrCl₃ · dme (dme = dimethoxyethane) and Cp*ZrCl₃(CP* = C₅(CH₃)₅) yielded the mono- and bi-nuclear bridged zirconocenes 1-(Cp″ZrCpCl₂)-4-(CH₃)C₆H₄ (3), 1,4-(Cp″ZrCpCl₂)₂C₆H₄ (4) and 1,4-(Cp″ZrCp*Cl₂)₂C₆H₄ (5). When activated with methylaluminoxane (MAO), the mono- and bi-nuclear zirconocenes 3 and 4 catalyse the polymerization of propene. The influence of the catalyst composition on the polymerization kinetics and molecular weight is discussed.     

A Short Synthesis of (−)-Carbovir

(–)-Carbovir ((–)- 1 ) was synthesized via the cyclic carbonate 2 in four steps starting from enantiomerically enriched (–)-(S)-(cyclopent-2-enyl)methanol ((–)- 3 ).     

Loss of epithelial polarity is accompanied by differential association of proteins with intracellular membranes

Cellular membranes play an important role in the formation and maintenance of epithelial polarity, which is lost early during carcinogenesis. We set out to identify membrane proteins which are altered during loss of cell polarity in mammary epithelium. As a model system we used murine mammary epithelial cells expressing the conditional oncoprotein c-JunER, which induces a reversible loss of polarity upon beta-estradiol-driven activation [1]. When grown either in the absence or presence of hormone, these cells exhibit a polarized or unpolarized phenotype, respectively. Different membrane fractions of polarized or unpolarized cells were analyzed by two-dimensional electrophoresis (2-DE) and differentially expressed membrane proteins were identified. To distinguish between transmembrane orientation and peripheral attachment of these proteins, were performed extractions with carbonate at high pH or with Triton X-114. In addition, cytosolic proteins of both states were analyzed to investigate their differential association with distinct membrane fractions. We found ten protein spots preferentially or exclusively in polarized cells and 17 other proteins as being upregulated during loss of polarity. Some of the peripheral membrane proteins were identified by microsequencing. The resident Golgi protein nucleobindin and fructose-bisphosphate aldolase were preferentially associated with membranes of polarized cells, whereas alphaB crystallin was detected exclusively and in high amounts in unpolarized cells.     

Characterization of some physical and chromatographic properties of monolithic poly(styrene-co-divinylbenzene) columns

Monolithic capillary columns were prepared by copolymerization of styrene and divinylbenzene inside a 200 microm i.d. fused silica capillary using a mixture of tetrahydrofuran and decanol as porogen. Important chromatographic features of the synthesized columns were characterized and critically compared to the properties of columns packed with micropellicular, octadecylated poly(styrene-co-divinylbenzene) (PS-DVB-C18) particles. The permeability of a 60 mm long monolithic column was slightly higher than that of an equally dimensioned column packed with PS-DVB-C18 beads and was invariant up to at least 250 bar column inlet pressure, indicating the high-pressure stability of the monolithic columns. Interestingly, monolithic columns showed a 3.6 times better separation efficiency for oligonucleotides than granular columns. To study differences of the molecular diffusion processes between granular and monolithic columns, Van Deemter plots were measured. Due to the favorable pore structure of monolithic columns all kind of diffusional band broadening was reduced two to five times. Using inverse size-exclusion chromatography a total porosity of 70% was determined, which consisted of internodule porosity (20%) and internal porosity (50%). The observed fast mass transfer and the resulting high separation efficiency suggested that the surface of the monolithic stationary phase is rather rough and does not feature real pores accessible to macromolecular analytes such as polypeptides or oligonucleotides. The maximum analytical loading capacity of monolithic columns for oligonucleotides was found to be in the region of 500 fmol, which compared well to the loading capacity of the granular columns. Batch-to-batch reproducibility proved to be better with granular stationary phases compared to monolithic stationary phase, in which each column bed is the result of a unique column preparation process.     

Simultaneous determination of ondansetron and tropisetron in human plasma using HPLC with UV detection

A rapid and sensitive HPLC method for the simultaneous quantitation of ondansetron and tropisetron, two serotonin (5-HT) receptor antagonists frequently used in treatment and prevention of nausea and emesis, is described. The procedure involves liquid-liquid extraction of human plasma with dichloromethane coupled with reversed-phase HPLC and UV detection. The lower limits of quantification (LOQ) were 0.62 ng/mL for ondansetron and 1.25 ng/mL or tropisetron. Intra- and inter-assay coefficients of variation ranged from 1.5 to 7.5% and 5.3 to 13.7%, respectively. The sensitivity and precision were sufficient for determination of plasma concentrations after therapeutic administration of both drugs and the method can be used for the estimation of pharmacokinetic parameters.     

Propene polymerization using homogeneous MAO-activated metallocene catalysts: Me2Si(Benz[e]Indenyl)2ZrCl2/MAO vs. Me2Si(2-Me-Benz[e]Indenyl)2ZrCl2/MAO

Propene was polymerized at 40°C and 2-bar propene in toluene using methylalumoxane (MAO) activated rac-Me₂Si(Benz[e]Indenyl)₂ZrCl₂ ( BI ) and rac-Me₂Si(2-Me-Benz[e]Indenyl)₂ZrCl₂ ( MBI ). Catalyst BI /MAO polymerizes propene with high activity to afford low molecular weight polypropylene, whereas MBI /MAO is less active and produces high molecular weight polypropylene. Variation of reaction conditions such as propene concentration, temperature, concentration of catalyst components, and addition of hydrogen reveals that the lower molecular weight polypropylene produced with BI /MAO results from chain transfer to propene monomer following a 2,1-insertion. A large fraction of both metallocene catalyst systems is deactivated upon 2,1-insertion. Such dormant sites can be reactivated by H₂-addition, which affords active metallocene hydrides. This effect of H₂-addition is reflected by a decreasing content of head-to-head enchainment and the formation of polypropylene with n-butyl end groups. Both catalysts show a strong dependence of activity on propene concentration that indicates a formal reaction order of 1.7 with respect to propene. MBI /MAO shows a much higher dependence of the activity on temperature than BI /MAO. At elevated temperatures, MBI /MAO polymerizes propene faster than BI /MAO. © 1995 John Wiley & Sons, Inc.