Propene polymerization using homogeneous MAO-activated metallocene catalysts: Me2Si(Benz[e]Indenyl)2ZrCl2/MAO vs. Me2Si(2-Me-Benz[e]Indenyl)2ZrCl2/MAO

Propene was polymerized at 40°C and 2-bar propene in toluene using methylalumoxane (MAO) activated rac-Me₂Si(Benz[e]Indenyl)₂ZrCl₂ ( BI ) and rac-Me₂Si(2-Me-Benz[e]Indenyl)₂ZrCl₂ ( MBI ). Catalyst BI /MAO polymerizes propene with high activity to afford low molecular weight polypropylene, whereas MBI /MAO is less active and produces high molecular weight polypropylene. Variation of reaction conditions such as propene concentration, temperature, concentration of catalyst components, and addition of hydrogen reveals that the lower molecular weight polypropylene produced with BI /MAO results from chain transfer to propene monomer following a 2,1-insertion. A large fraction of both metallocene catalyst systems is deactivated upon 2,1-insertion. Such dormant sites can be reactivated by H₂-addition, which affords active metallocene hydrides. This effect of H₂-addition is reflected by a decreasing content of head-to-head enchainment and the formation of polypropylene with n-butyl end groups. Both catalysts show a strong dependence of activity on propene concentration that indicates a formal reaction order of 1.7 with respect to propene. MBI /MAO shows a much higher dependence of the activity on temperature than BI /MAO. At elevated temperatures, MBI /MAO polymerizes propene faster than BI /MAO. © 1995 John Wiley & Sons, Inc.     

Intermolecular coupling of alkenes to heterocycles via C-H bond activation

The intermolecular coupling of unactivated alkenes to a range of heterocycles using a Rh(I) catalyst was investigated. A variety of functional groups were incorporated into the alkene, including esters, nitriles, acetals, and phthalimide. Furthermore, the heterocycle tolerated substitution with both electron-rich and electron-deficient groups. The intermolecular coupling became possible after it was discovered that weak acids dramatically increase the rate of both the inter- and intramolecular reactions. An extensive optimization of additives was performed, and HCl.PCy(3) (Cy = cyclohexyl) and HCl.P-t-Bu(2)Et were in general found to be the best additives for the reaction.     

Rapid determination of microorganisms using a flow-injection system

An automated method for the rapid determination of microorganisms using a flow-injection system is presented. Electrochemical measurement of a mediator reduced by microbial metabolism allowed the determination of fungi and bacteria in a few minutes. The lowest detection limit was 5 × 10⁶ colony-forming units (cfu) ml^?1 for Escherichia coli. Correlation between the flow-injection method and standard microbiological methods was excellent (r = 0.997, n = 4 for Beauveria bassiana; r = 0.997, n = 7 for E. coli). The flow-injection system was applied to the on-line control of an E. coli cultivation.     

Synthesis of some fused β‐carbolines including the first example of the pyrrolo[3,2‐c]‐β‐carboline system

Condensation of 1‐methyl‐β‐carboline‐3‐carbaldehyde with ethyl azidoacetate and subsequent thermolysis of the resulting azidopropenoate was used to [c] annulate a pyrrole ring onto the β‐carboline moiety, thus producing the first example of the pyrrolo[3,2‐c]‐β‐carboline ring system. The latter ring system results from cyclization at the C‐4 carbon, whereas cyclization at the N‐2 nitrogen atom also occurs to form a pyrazolo[3,2‐c]‐β‐carboline ring system. Condensation of β‐carboline‐1‐carbaldehyde with ethyl azidoacetate produced a non‐isolable intermediate, which immediately underwent cyclization, however in this case cyclization occurred via attack at the ester and the azide remained intact. The resulting 5‐azidocanthin‐6‐one was transformed to the first examples of 5‐aminocanthin‐6‐ones. β‐Carboline‐1,3‐dicarbaldehyde failed to give an acceptable reaction with ethyl azidoacetate, but did undergo selective condensation with dimethyl acetylene dicarboxylate at the C‐1 carbaldehyde with concomitant cyclization to form a highly functionalized 2‐formyl‐canthine derivative.     

Eilatin complexes of ruthenium and osmium. synthesis, electrochemical behavior, and near-IR luminescence

The synthesis and characterization of new Ru(II) and Os(II) complexes of the ligand eilatin (1) are described. The new complexes [Ru(bpy)(eil)(2)](2+) (2), [Ru(eil)(3)](2+) (3), and [Os(eil)(3)](2+) (4) (bpy = 2,2'-bipyridine; eil = eilatin) were synthesized and characterized by NMR, fast atom bombardment mass spectrometry, and elemental analysis. In the series of complexes [Ru(bpy)(x)(eil)(y)()](2+) (x + y = 3), the effect of sequential substitution of eil for bpy on the electrochemical and photophysical properties was examined. The absorption spectra of the complexes exhibit several bpy- and eil-associated pi-pi and metal-to-ligand charge-transfer (MLCT) transitions in the visible region (400-600 nm), whose energy and relative intensity depend on the number of ligands bound to the metal center (x and y). On going from [Ru(bpy)(2)(eil)](2+) (5) to 2 to 3, the d(pi)(Ru) --> pi(eil) MLCT transition undergoes a red shift from 583 to 591 to 599 nm, respectively. Electrochemical measurements performed in dimethyl sulfoxide reveal several ligand-based reduction processes, where each eil ligand can accept up to two electrons at potentials that are significantly anodically shifted (by ca. 1 V) with respect to the bpy ligands. The complexes exhibit near-IR emission (900-1100 nm) of typical (3)MLCT character, both at room temperature and at 77 K. Along the series 5, 2, and 3, upon substitution of eil for bpy, the emission maxima undergo a blue shift and the quantum yields and lifetimes increase. The radiative and nonradiative processes that contribute to deactivation of the excited level are discussed in detail.     

Analysis of proteins from a glioma cell line by using micro-scale solution isoelectric focusing in combination with liquid chromatography/tandem mass spectrometry

In this study we have investigated whether micro-solution isoelectric focusing (microsol-IEF) can be used as a pre-fractionation step prior to liquid chromatography/tandem mass spectrometry (LC/MS/MS) and if extensive sample purification of the different fractions is required. We found that, in spite of the high concentrations of buffer and detergents, no clean up of the digested microsol-IEF fractions was necessary before analysis by LC/MS/MS. We also concluded that it is possible to identify at least twice as many proteins in a glioma cell lysate with the combination of microsol-IEF and LC/MS/MS than with LC/MS/MS alone. Furthermore, most of the proteins that were identified from one microsol-IEF fraction by using analytical narrow-range two-dimensional polyacrylamide gel electrophoresis (2D-PAGE) and peptide mass fingerprinting with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) were also identified by LC/MS/MS. Finally, we used the combination of microsol-IEF and LC/MS/MS to compare two sample preparation methods for glioma cells and found that several nuclear, mitochondria, and endoplasmic reticulum proteins were only present in the sample that had been subjected to lipid extraction by incubating the homogenized cells in chloroform/methanol/water.     

Metal- and ligand-directed one-pot syntheses,crystal structures,and properties of novel oxo-centered tetra- and hexametallic clusters

Starting from closely related metal-ligand combinations, completely different oligomeric metal clusters are synthesized. Whereas, picoline-tetrazolylamide HL(1) (1) and zinc or nickel acetate afforded [2x2] grids [M(4)(L(1))(8)] (2), slightly different N-(2-methylthiazole-5-yl)-thiazole-2-carboxamide HL(2) (5 a) and nickel acetate yielded the monometallic complex [Ni(L(2))(2)(OH(2))(2)] (6). In contrast, reaction of 5 a with zinc acetate produced the tetrametallic zinc cluster [Zn(4)O(L(2))(4)(OAc)(2)] (7). Even more surprising, when 3-methyl-substituted HL(3) (5 b) instead of 2-methyl-substituted HL(2) (5 a) was allowed to react under identical conditions with zinc acetate, the cluster [Zn(4)O(L(3))(4)Cl(2)] (8) crystallized from dichloromethane. Clusters 7 and 8 are isostructural. As for 7, in 8 two of the edges of the tetrahedron of zinc ions are doubly bridged, two are singly bridged, and the other two are nonbridged. On the other hand, when iron(II) acetate under aerobic conditions was allowed to react with 5 a, the unprecedented complex [[Fe(3)O(L(2))(2)(OAc)(4)](2)O] (9) was isolated. Cluster 9 is composed of two trimetallic, triangular mu(3)-O(2-)-centered [Fe(3)O(L(2))(2)(OAc)(4)](+) modules, linked by an almost linear mu(2)-O(2-) bridge. The M?ssbauer spectrum together with cyclic voltammetric and square-wave voltammetric measurements of 9 are reported, and 6-9 were characterized unequivocally by single-crystal X-ray structure analyses.     

Aurophilicity-coordination interplay in the design of cyano-bridged nickel(II)-Gold(I) bimetallic assemblies: structural and computational studies of the gold(I)-gold(I) interactions

Two polymorphic cyano-bridged Au(I)-Ni(II) bimetallic complexes of formulas [Ni(en)2Au(CN)2][Au(CN)2] (1) and [Ni(en)2[Au(CN)2]2] (2) have been prepared from the 1:2 reaction between [Au(CN)2]- and either [Ni(en)2Cl2]Cl or [Ni(en)3]Cl2.2H2O, respectively. The structure of 1 consists of polymeric cationic chains of alternating [Au(CN)2]- and [Ni(en)2]2+ units running along the a axis and [Au(CN)2]- anions lying between the chains. The noncoordinated dicyanoaurate anions are aligned perpendicular to the ac plane and involved in aurophilic interactions with the bridging dicyanoaurate groups, ultimately leading to a 2D bimetallic grid. The structure of 2 consists of trinuclear molecules made of two [Au(CN)2]- anions linked to [Ni(en)2]2+ unit in trans configuration. Trinuclear units are joined by aurophilic interactions to form 1D zigzag chains. The magnetic properties of these compounds are strongly dominated by the local anisotropy of the octahedral Ni(II) ions, thus indicating that the magnetic exchange interaction mediated by dicyanoaurate bridging groups, if it exists, is very weak. To get insight into the electronic properties of the inter- and intramolecular interactions of the [Au(CN)2]- building blocks, the structures of different aggregates of dicyanogold units were optimized and then analyzed by making use of atoms-in-molecules (AIM) theory. Moreover, bond indices were calculated by methods based upon nonlinear population analysis.