Toward chromium speciation in solids using wavelength dispersive X-ray fluorescence spectrometry Cr Kβ lines

The determination of chromium speciation in solid samples is critical for environmental and industrial purposes. Several analytical methods exist to perform such a determination either directly in solid state or liquid state after an extraction step, each of them having some limitations. In this study, the use of a high-resolution wavelength-dispersive X-ray fluorescence spectrometer to determine and quantify chromium species is investigated by looking at the differences in the Kβ transition profiles between Cr(0), Cr(III) and Cr(VI) compounds. Three different approaches were tested and compared to determine the Cr(VI) fraction of known mixtures: relative height and peak fitting using calibration mixtures, partial least square regression (PLS) of pure compounds, and principal component regression (PCR) of pure compounds. The accuracy of these methods was found to be about the same with an average relative error in the range of 15%. However, PLS and PCR can be easily implemented in an automated way contrary to peak fitting which can be sometimes perceived as analyst-dependant. Another advantage of using PLS and PCR is that information concerning the other oxidation states present in the sample can be retrieved. Finally, PLS and the peak height approach can be used up to 0.5% total chromium which make the XRF an alternative technique to X-ray induced photoelectron spectroscopy (XPS) for chromium speciation in solid state.     

Building block synthesis of predominantly (E) symmetrical and unsymmetrical 1,2-difluorostilbenes from 1,2-dibromo-1,2-difluoroethene

An efficient synthesis of predominantly (E) symmetrical or unsymmetrical 1,2-difluorostilbenes based on the Suzuki–Miyaura palladium-catalyzed cross-coupling reaction of arylboronic acids with predominantly (E)-1,2-dibromo-1,2-difluoroethene in the presence of Cs₂CO₃ in toluene is described. The reaction preserved the stereochemistry of the building block and performed in good yield independently of the electron-withdrawing or electron-donating character of the substituents.     

Electroanalytical Study of the Composition of the Raw Pigment Mixtures that Yield the Metallic Lustre on Ceramics. A Link Between Composition and Final Result

Voltammetry of immobilized microparticles was used to study the electrochemistry of the raw pigments that produce the metallic lustre on ceramics after a successful firing. To study this influence of the mixture components on the reduction properties to achieve the metallic lustre, 14 mixtures of illitic clay, Fe₂O₃, HgS, CuO and AgNO₃ were prepared and studied in different media. Iron oxide improves the yield of the reduction of the metals and cinnabar helps a closer reduction of silver to copper reduction and prevents the Ag? Cu alloying because of the formation of silver–mercury adducts. The presence of one of the metals influences the peak position of the other metal. The use of vinegar as diluting agent is not casual, because in this media the reduction of silver takes place at a potential closer to the copper. This electroanalytical technique allowed to distinguish between powders of different composition and offered some information about the role of the components in the reduction of copper and silver and the selection of vinegar to prepare the raw pigment suspensions.     

Boron macrocycles having a calix-like shape. Synthesis, characterization, X-ray analysis, and inclusion properties

The syntheses, structure, and inclusion properties of trinuclear boron compounds having a calix-like shape are described. The compounds have been obtained via self-assembly reactions between salicylaldehyde derivatives and 3-aminophenylboronic acid, whereby the formation of three N --> B coordination bonds favored the oligomerization. The products have high melting points (>370 degrees C), are stable to moisture, and have good solubility in organic solvents; the latter property is useful for host-guest recognition experiments. The structural analysis by X-ray diffraction revealed that diverse conformations are possible because of the presence of two different units of aromatic rims. A cone-cone (double-cone) conformation is observed for three of these compounds, while the remaining one has a cone-partial cone conformation. An analysis of the molecular packing showed that the molecules are stacked in columns in two different orientations in relation to the organization of the macrocycles when referred to the N-B bonds. The inclusion properties toward primary amines and ammonium chlorides were analyzed by titration experiments and monitored by UV spectroscopy, whereby association constants on the order of 10(2)-10(3) M(-1) were determined.     

Photoinduced electroreduction of chlorophyllide on alkanethiol-coated mercury

Monolayers of n-alkanethiols of chain length from C12 to C18 were self-assembled on a hanging mercury drop electrode, and a film of chlorophyllide (Chlide) was adsorbed on top of them. The reduction photocurrents following illumination of the Chlide film were measured over the potential range in which the Chlide is electroinactive in the dark, and their action spectra were determined. Plotting the derivative of the photocurrents with respect to the applied potential against potential yields bell-shaped curves that can be fitted to a Gaussian. The potential of the Gaussian maximum was used to determine the reorganization energy lambda for the Chlide electroreduction process. An increase in the thiol chain length causes lambda to decrease regularly and the photocurrent to decay exponentially with the monolayer thickness, with a decay constant beta of about 0.17 A(-1).     

Polygonal heat conductors with a stationary hot spot

We consider a convex polygonal heat conductor whose inscribed circle touches every side of the conductor. Initially, the conductor has constant temperature and, at every time, the temperature of its boundary is kept at zero. The hot spot is the point at which temperature attains its maximum at each given time. It is proved that, if the hot spot is stationary, then the conductor must satisfy two geometric conditions. In particular, we prove that these geometric conditions yield some symmetries provided the conductor is either pentagonal or hexagonal. This research was partially supported by Grants-in-Aid for Scientific Research (B) (# 12440042) and (B) (# 15340047) of Japan Society for the Promotion of Science, and by a Grant of the Italian MURST.     

Displacement measurements in structural elements by optical techniques

Speckle metrology and holographic interferometry (HI) have been used in several civil engineering applications. We present the results obtained by applying speckle photography (SP) to the study of two quadratic shearwalls with different boundary conditions, and the potential of the technique in the study of this kind of structures is described. The analysis of Young's fringes obtained with this technique at certain points on each shearwall provides the whole field of displacement measurements. HI has been used to measure the three components of absolute displacement, verifying that the bulging phenomenon does not affect the in-plane components when the applied load remains on the same plane as the shearwall. A qualitative analysis is carried out following an electronic speckle pattern interferometry (ESPI) technique. The results obtained by optical techniques are compared to the numerical results obtained by the finite element method (FEM), finding good correlation between them in all the cases.     

Polymerization kinetics and microstructure of waterborne acrylic/alkyd nanocomposites synthesized by miniemulsion

Waterborne acrylic‐alkyd nanocomposites are expected to combine the positive properties of alkyd resins and acrylic polymers. In this work, the kinetics of the miniemulsion polymerization used to synthesize these nanocomposites and the effect of the process variables on the polymer architecture and particle morphology was investigated. It was found that resin hydrophobicity and the type of initiator strongly affected the microstructure of these materials. The mechanisms responsible for these effects were discussed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4871–4885, 2009