Composition and properties of freeze-dried products of nicotinic acid withβ-cyclodextrin and heptakis (2,6-0-dimethyl)-β-cyclodextrin

The purpose of the study was to examine the formation of inclusion compounds in the freeze-dried products obtained from aqueous solutions of nicotinic acid and -cyclodextrin (-CD), or heptakis (2,6-0-dimethyl)--cyclodextrin (DIMEB). The molar ratios used were 1:1 and 2:1. In addition two freezing temperatures (–40 and –196°C) and different secondary drying temperatures (+50 and +80°C) were used. Freeze-dried products with -CD obtained after low temperature freezing are of the same crystallographic structure as seen in a pure inclusion compound prepared by coprecipitation. Amorphous products were formed after fast freezing. The molar ratios of included nicotinic acid in the freeze-dried products vary — dependent on the preparation conditions — between 0.75:1 and 1:1. A factorial design proves that the included drug amount can be increased by enhancement of the amount of nicotinic acid used, by faster freezing, and by the combination of these two factors. The proof of inclusion formation was given by a combination of X-ray diffractography, differential scanning calorimetry, thermogravimetry and thermofractography.The freeze-dried preparations obtained with DIMEB were amorphous mixtures of the two components. No proof for inclusion of the nicotinic acid in the cyclodextrin cavity could be given. Higher (–40°C) or lower (–196°C) freezing temperatures and the running of the secondary drying process could not influence these results. The very low stability constant of the complex and steric reasons are responsible for this behavior.     

Giant vesicles formed by gentle hydration and electroformation: a comparison by fluorescence microscopy

Giant unilamellar vesicles (diameter of a few tens of micrometers) are commonly produced by hydration of a dried lipidic film. After addition of the aqueous solution, two major protocols are used: (i) the gentle hydration method where the vesicles spontaneously form and (ii) the electroformation method where an ac electric field is applied. Electroformation is known to improve the rate of unilamellarity of the vesicles though it imposes more restricting conditions for the lipidic composition of the vesicles. Here we further characterize these methods by using fluorescence microscopy. It enables not only a sensitive detection of the defects but also an evaluation of the quantity of lipids in these defects. A classification of the defects is proposed and statistics of their relative importance in regard to both methods and lipid composition are presented: it shows for example that 80% of the vesicles obtained by electroformation from 98% 1,2-dioleoyl-sn-glycero-3-phosphocholine are devoid of significant defects against only 40% of the vesicles with the gentle hydration method. It is also shown that the presence of too many negatively charged lipids does not favor the formation of unilamellar vesicles with both methods. For the gentle hydration, we checked if the negatively charged lipids were inserted in the vesicles membrane in the same proportion as that of the lipid mixture from which they are formed. The constant incorporation of a negatively charged labeled lipid despite an increasing presence of negatively charged 1,2-dioleoyl-sn-glycero-3-[phospho-l-serine] tends to confirm that the composition of vesicles is indeed close to that of the initial mixture.     

Optical sensor systems for bioprocess monitoring

Bioreactors are closed systems in which microorganisms can be cultivated under defined, controllable conditions that can be optimized with regard to viability, reproducibility, and product-oriented productivity. To drive the biochemical reaction network of the biological system through the desired reaction optimally, the complex interactions of the overall system must be understood and controlled. Optical sensors which encompass all analytical methods based on interactions of light with matter are efficient tools to obtain this information. Optical sensors generally offer the advantages of noninvasive, nondestructive, continuous, and simultaneous multianalyte monitoring. However, at this time, no general optical detection system has been developed. Since modern bioprocesses are extremely complex and differ from process to process (e.g., fungal antibiotic production versus mammalian cell cultivation), appropriate analytical systems must be set up from different basic modules, designed to meet the special demands of each particular process. In this minireview, some new applications in bioprocess monitoring of the following optical sensing principles will be discussed: UV spectroscopy, IR spectroscopy, Raman spectroscopy, fluorescence spectroscopy, pulsed terahertz spectroscopy (PTS), optical biosensors, in situ microscope, surface plasmon resonance (SPR), and reflectometric interference spectroscopy (RIF).     

Catalytic transesterification of dialkyl phosphates by a bioinspired dicopper(II) macrocyclic complex

For a number of phosphoryltransfer enzymes, including the exonuclease subunit of DNA polymerase I, a mechanism involving two-metal ions and double Lewis-acid activation of the substrate, combined with leaving group stabilization, has been proposed. Inspired by the active site structure of this enzyme, we have designed as a synthetic phosphoryl transfer catalyst the dicopper(II) macrocyclic complex LCu(2). Crystal structures of complexes [(L)Cu(2)(mu-NO(3))(NO(3))](NO(3))(2) (1), [(L)Cu(2)(mu-CO(3))(CH(3)OH)](BF(4))(2) (2), and [(L)Cu(2)(mu-O(2)P(OCH(3))(2))(NO(3))](NO(3))(2) (3) illustrate various possibilities for the interaction of oxoanions with the dicopper(II) site. 1 efficiently promotes the transesterification of dimethyl phosphate (DMP) in CD(3)OD, k(cat) = 2 x 10(-)(4) s(-)(1) at 55 degrees C. 1 is the only available catalyst for the smooth transesterification of highly inert simple dialkyl phosphates. From photometric titrations and the pH dependence of reactivity, we conclude that a complex [(L)Cu(2)(DMP)(OCH(3))](2+) is the reactive species. Steric bulk at the -OR substituents of phosphodiester substrates O(2)P(OR)(2)(-) drastically reduces the reactivity of 1. This is explained with -OR leaving group stabilization by Cu coordination, an interaction which is sensitive to steric crowding at the alpha-C-atom of substituent R. A proposed reaction mechanism related to that of the exonuclease unit of DNA polymerase I is supported by DFT calculations on reaction intermediates. The complex [(L)Cu(3)(mu(3)-OH)(mu-CH(3)O)(2)(CH(3)CN)(2)](ClO(4))(3) (4) incorporates a [Cu(OH)(OCH(3))(2)(CH(3)CN)(2)](-) complex anion, which might be considered as an analogue of the [PO(2)(OCH(3))(2)(OCD(3))](2)(-) transition state (or intermediate) of DMP transesterification catalyzed by LCu(2).     

A femtosecond study of the infrared-driven cis-trans isomerization of nitrous acid (HONO)

We investigate the dynamics and mechanism of the IR-driven cis-trans isomerization of nitrous acid (HONO) in a low-temperature krypton matrix applying ultrafast time resolved IR spectroscopy. After excitation of the OH-stretching mode the trans HONO state decays biexponentially on a 8 and 260 ps time scale. The initially excited cis HONO state decays on a 20 ps time scale. Cis HONO isomerizes with 10% quantum yield on a 20 ps time scale to trans HONO. The quantum yield we observe is significantly smaller than the previously reported 100%, which could imply that additional, much slower reaction channels exist. We furthermore developed a four-dimensional model of the system, which includes the three proton intramolecular degrees of freedom of HONO fully quantum mechanically and one intermolecular translational degree of freedom of the molecule in the crystal cage. We find that cis-trans isomerization necessarily is accompanied by a translation of the molecule as a whole in the crystal cage. The translational degree of freedom tunes the intramolecular proton states of HONO with respect to each other. When resonances occur, the proton states might couple and transfer population. We suggest a possible reaction pathway, where the cis OH-stretch excited state first couples to a high cis torsional mode, which then may transfer almost instantaneously to the trans side. The model qualitatively explains all experimental observations.     

Trifluoromethoxy substituted anilines: metalation as the key step for structural elaboration

Trifluoromethoxy-substituted anilines undergo hydrogen/lithium permutation ("metalation") with optional site selectivity depending on the N-protective group employed. N-tert-Butoxycarbonyl-2- and -4-(trifluoromethoxy)aniline react with tert-butyllithium at the nitrogen-adjacent 6- and 2-position affording, after electrophilic trapping, products 1-6. In contrast, deprotonation of the para isomer occurs at the oxygen-neighboring 3-position, giving rise to the acid 12, when the amino group is carrying two trimethylsilyl groups. sec-Butyllithium attacks 3-trifluoromethoxy-N-mono(trimethylsilyl)aniline at the 2-position, but 3-trifluoromethoxy-N,N-bis(trimethylsilyl)aniline at the 4-position to provide respectively the acids 10 and 11 after carboxylation. The synthesis of two new benzodiazepines illustrates (19 and 22) the preparative potential of the aniline functionalization mediated by organometallic reagents.     

Reagents for new heteroannelation reactions III. 2-(Methylthio)-2-thiazoline

Summary A variety of partly novel tri- and tetracyclic hetero systems were obtained by reaction of heteroaromatic 2-aminoesters with 2-(methylthio)-2-thiazoline, yielding double-annelation of a thiazolo[2,3-b]pyrimido moiety in a one-pot process.On leave from University of Chittagong, Bangladesh     

A microcomputer-controlled titrator for automated individual analysis

A titration unit for automatic analysis systems is described. The titrator performs different titrations specified by strings of digital parameters. It has 4 independent titration stations with individual electrode systems. A multiburette with 20 cylinders provides all stations with the necessary reagents. End-point titrations, and incremental and equilibrium titrations are controlled by a microcomputer. In combination with a sample transport and a desk calculator, the titrator can be used to process automatically samples of different natures which require different treatment.