Precise Control of Intramolecular Charge‐Transport: The Interplay of Distance and Conformational Effects

A new series of donor–bridge–acceptor (D–B–A) compounds consisting of π‐conjugated oligofluorene (oFL) bridges between a ferrocene (Fc) electron‐donor and a fullerene (C₆₀) electron‐acceptor have been synthesized. In addition to varying the length of the bridge (i.e., mono‐ and bi‐fluorene derivatives), four different ways of linking ferrocene to the bridge have been examined. The Fc moiety is linked to oFL: 1) directly without any spacer, 2) by an ethynyl linkage, 3) by a vinylene linkage, and 4) by a p‐phenylene unit. The electronic interactions between the electroactive species have been characterized by cyclic voltammetry, absorption, fluorescence, and transient absorption spectroscopy in combination with quantum chemical calculations. The calculations reveal exceptionally close energy‐matching between the Fc and the oFL units, which results in strong electronic‐coupling. Hence, intramolecular charge‐transfer may easily occur upon exciting either the oFLs or Fcs. Photoexcitation of Fc–oFL–C₆₀ conjugates results in transient radical‐ion‐pair states. The mode of linkage of the Fc and FL bridge has a profound effect on the photophysical properties. Whereas intramolecular charge‐separation is found to occur rather independently of the distance, the linker between Fc and oFL acts (at least in oFL) as a bottleneck and significantly impacts the intramolecular charge‐separation rates, resulting in beta values between β_CS 0.08 and 0.19 Å^?1. In contrast, charge recombination depends strongly on the electron‐donor–acceptor distance, but not at all on the linker. A value of β_CR (0.35±0.01 Å^?1) was found for all the systems studied. Oligofluorenes prove, therefore, to be excellent bridges for probing how small structural variations affect charge transport in D–B–A systems.     

Comparative characterization of oligomeric precursors intended for injectable implants

The use of injectable materials is a simple approach for drug delivery and tissue repair, in, e.g. minimally invasive surgery applications. If these materials are used past their glass transition temperature and have a low viscosity, they will be able to flow while delivered in situ. Whether these materials are to be used as low viscosity drug carriers or further crosslinked for tissue repair, there is a need for a better understanding of their handling properties. In this study, oligo(trimethylene carbonate) (oTMC) and oligo[D,L‐lactide‐co‐(ε‐caprolactone)] (oDLLA‐co‐CL) of various molecular weights within a relevant injectability range were synthesized via ring‐opening polymerization. The materials were comparatively characterized by ¹H NMR spectroscopy, differential scanning calorimetry, gel permeation chromatography, and rheological measurements. After comparing the viscosities and molecular weights of the materials, it was concluded that oDLLA‐co‐CLs were, generally, better suited as an injectable in situ crosslinking network, whereas oTMCs were found to be better candidates as injectable drug carriers. This study provides useful data and guidelines on the use of these and other similar oligomers intended for injectable implants. Copyright © 2012 John Wiley & Sons, Ltd.     

DFT 1H–1H coupling constants in the conformational analysis and stereoisomeric differentiation of 6‐heptenyl‐2H‐pyran‐2‐ones: configurational reassignment of synargentolide A

Density functional theory (DFT) ¹H–¹H NMR coupling constant calculations, including solvation parameters with the polarizable continuum model B3LYP/DGDZVP basis set together with the experimental values measured by spectral simulation, were used to predict the configuration of hydroxylated 6‐heptenyl‐5,6‐dihydro‐2H‐pyran‐2‐ones 1 , 2 , 4 , and 7 , allowing epimer differentiation. Modeling of these flexible compounds requires the inclusion of solvation models that account for stabilizing interactions derived from intramolecular and intermolecular hydrogen bonds, in contrast with peracetylated derivatives ( 3 , 5 , and 6 ) in which the solvation consideration can be omitted. Using this DFT NMR integrated approach as well as spectral simulation, the configurational reassignment of synargentolide A ( 8 ) was accomplished by calculations in the gas phase among four possible diastereoisomers ( 8–11 ). Calculated ³J_H,H values established its configuration as 6R‐[4′S,5′S,6′S‐(triacetyloxy)‐2E‐heptenyl]‐5,6‐dihydro‐2H‐pyran‐2‐one ( 8 ), in contrast with the incorrect 6R,4′R,5′R,6′R‐diastereoisomer previously proposed by synthesis ( 12 ). Application of this approach increases the probability for successful enantiospecific total syntheses of flexible compounds with multiple chiral centers. Copyright © 2014 John Wiley & Sons, Ltd.     

Vortex-Assisted Liquid–Liquid Microextraction (VALLME): Applications

Recently, a new and fast equilibrium-based solvent microextraction technique termed vortex-assisted liquid–liquid microextraction was developed. In this technique, the dispersion of the extraction solvent is enhanced by vortex mixing. The aim of the present review is to discuss the applications of vortex agitation in solvent-microextraction procedures.     

Dynamics of cyclodimerization and viscoelasticity of photo‐crosslinkable PVA

We investigated the interfacial properties of poly(vinyl alcohol) carrying UV‐crosslinkable pendant quaternized stilbazole (styrylpyridinium), PVA‐SbQ. The extent and dynamics of PVA‐SbQ cyclodimerization reactions and crosslinking induced by UV irradiation were monitored in situ and in real time by quartz crystal microgravimetry (QCM). Sensograms reflecting time‐dependent changes in density and viscoelasticity of crosslinking films followed a Boltzmann sigmoidal model, depending on precursor film composition and irradiation power. The shifts in QCM frequency and energy dissipation upon PVA‐SbQ cyclodimerization correlated with three photo‐crosslinking phases involving soft‐to‐rigid transitions, namely, induction (initiation), main crosslinking (interaction), and termination. PVA‐SbQ films crosslinked to different degree were used as protein carriers and a slower release profile was determined for the films that underwent more extensive crosslinking. Overall, this study demonstrates for the first time the dynamics of PVA‐SbQ crosslinking and its impact in system viscoelasticity and protein release. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 345–355     

Voltammetric Analysis of Naproxen in Graphite Electrodes and Its Determination in Pharmaceutical Samples

The present work discuses new findings in the electrochemistry of naproxen over graphite electrodes. This new approach, allows the proposal of a simple and competitive low‐cost method to carry out naproxen’s voltammetric quantification. Naproxen’s indirect quantification through an adsorption anodic wave was performed at a graphite bar electrode using differential pulse voltammetry. An anodic current maximum was recorded at a potential of ?0.3 V referred to a saturated Ag/AgCl reference electrode. The calibration plot having a correlation coefficient of 0.990, sensibility of 4.19±0.62 µA cm³ µg^?1, with detection and quantification limits of 0.68 and 3.3 µg cm^?3, respectively.     

Tweaking the affinity of aryl‐substituted diazosalicylato‐ and pyridine ligands towards Zn (II) and its neighbors in the periodic system of the elements,Cu (II) and Cd (II), and their antimicrobial activity

A series of six new Zn (II) compounds, viz., [Zn(HL^ASA)₂(Py)₂] ( 1 ), [Zn(HL^MASA)₂(Py)₂] ( 2 ), [Zn(HL^MASA)₂(4‐MePy)₂] ( 3 ), [Zn(HL^CASA)₂(4‐MePy)₂] ( 4 ), [Zn(HL^BASA)₂(Py)₂] ( 5 ), [Zn(HL^BASA)₂(4‐MePy)₂] ( 6 ) and representative Cu (II) and Cd (II) complexes, viz., [Cu(HL^ASA)₂(Py)₂(H₂O)] ( 7 ) and [Cd(HL^BASA)₂(Py)₃] ( 8 ) [(HL^XASA)^? = para‐substituted 5‐[(E)‐2‐(aryl)‐1‐diazenyl]‐2‐hydroxybenzoate with X = H (ASA), Me (MASA), Cl (CASA) or Br (BASA); Py = pyridine; 4‐MePy = 4‐methylpyridine] have been synthesized and characterized by spectroscopic techniques and single‐crystal X‐ray diffraction analysis. The structural characterization of the compounds revealed distorted tetrahedral ( 1 – 6 ), square‐pyramidal ( 7 ) and pentagonal‐bipyramidal ( 8 ) coordination geometries around the metal atom, in which the aryl‐substituted diazosalicylate ligands are coordinated only through the oxygen atoms of carboxylate groups, either in an anisobidentate or isobidentate mode; meanwhile, the 2‐hydroxy groups of the monoanionic ligand (HL^XASA)^? are involved only in intramolecular O‐H···O hydrogen bonds with the carboxylate function. In the crystal structures of 1 – 8 , the complex molecules are assembled by π‐stacking interactions giving mostly infinite 1D strands. The intermolecular binding in the solid state structures is accomplished by diverse additional non‐covalent contacts including C‐H···O, C‐H···N, C‐H···π, C‐H···Br, O···Br, Br···π and van der Waals contacts. Although the primary and secondary ligands in the Zn (II) complex series 1 – 6 carry different substituents at the periphery (X = H, Me, Cl, Br for (HL^XASA)^? and R = H, Me for 4‐Py‐R), five of the crystal structures were isostructural. Additionally, the antimicrobial activity of the pro‐ligands H₂L^XASA and their Zn (II), Cu (II) and Cd (II) compounds were studied in a comparative manner, showing high sensitivity (IZD ≥ 20) against Bacillus subtilis.     

Thermoelectric properties of Bi2Te3 films by constant and pulsed electrodeposition

Bi₂Te₃ films have been grown by constant and pulsed electrochemical deposition. The pulsed deposition was carried out by alternating between a constant potential (potentiostatic mode) and an open circuit potential (galvanostatic mode, where current density is fixed at 0 mA/cm²). The Harris texture analysis was performed to determine the degree of preferred orientation. The results showed that the films were strongly oriented along (1?1?0) direction. The morphology and compositions of the films were then analyzed. Finally, their Seebeck coefficient and electrical resistivity were measured and used to determine the thermoelectric Power Factor of the films for a temperature range between 57 and 107 °C.     

PREPARATION OF LARGE-PARTICLE-SIZE MONODISPERSE LATEXES IN SPACE: POLYMERIZATION KINETICS AND PROCESS DEVELOPMENT

Monodisperse polystyrene latexes are prepared by seeded emulsion polymerization; however, sizes larger than 2μm are difficult to prepare because of the creaming and settling of the particles, and their sensitivity to mechanical shear. Preparation in space would obviate the creaming and settling, and allow agitation just sufficient for good heat transfer and mixing. Three polymerizations yielding 3-5μm size particles were carried out successfully on the third flight of the “Columbia” launched March 22, 1982; however, four polymerizations yielding sizes up to 10μm on the fourth flight launched June 27, 1982, were incomplete owing to apparatus malfunction. The results of these polymerizations and the prospects of developing a preparative space process are reviewed     

Rechargeable sodium-ion battery based on a cathode of copper hexacyanoferrate

Journal of Solid State Electrochemistry - In this work, the performance of copper (II) hexacyanoferrate(III) (CuHCF) as a cathode material for sodium-ion batteries was studied. The compound was...