Ultrasound-assisted liquid-phase microextraction based on a nanostructured supramolecular solvent

Novel ultrasonically enhanced supramolecular solvent microextraction (USESSM) then high-performance liquid chromatography with ultraviolet detection have been used for extraction and determination of phthalates in water and cosmetics. Coacervates consisting of decanoic acid-based nano-structured aggregates, specifically reverse micelles, have been used the first time as solvents for ultrasound-assisted emulsification microextraction (USAEME). Sonication accelerated mass transfer of the target analytes into the nano-structured solvent from the aqueous sample, thus reducing extraction time. Several conditions affecting extraction efficiency, for example the concentrations of major components of the supramolecular solvent (tetrahydrofuran and decanoic acid), sample solution pH, salt addition, and ultrasonication time, were investigated and optimized. Under the optimum conditions, preconcentration of the analytes ranged from 176 to 412-fold and the linear range was 0.5–100 μg?L^?1, with correlation coefficients (R ²)?≥?0.9984. The detection sensitivity of the method was excellent, with limits of detection (LOD, S/N?=?3) in the range 0.10–0.70 μg?L^?1 and precision in the range 4.1–11.7 % (RSD, n?=?5). This method was successfully used for analysis of phthalates in water and cosmetics, with good recovery of spiked phthalates (91.0–108.5 %).     

One‐Pot Synthesis of Sulfonamides and Sulfonyl Azides from Thiols using Chloramine‐T

A convenient synthesis of sulfonamides and sulfonyl azides from thiols is described. In situ preparation of sulfonyl chlorides from thiols was accomplished by oxidation with chloramine‐T (=N‐chlorotosylamide=N‐chloro‐4‐methylbenzenesulfonamide), tetrabutylammonium chloride (Bu₄NCl), and H₂O. The sulfonyl chlorides were then further allowed to react with excess amine or NaN₃ in the same pot.     

Efficient Synthesis of Trialkyl (E)‐3‐{3‐Oxo‐2‐3,4‐dihydro‐2‐(1H)‐quinoxalinylidene}‐prop‐1‐ene‐1,2,3‐tricarboxylates

The reaction of dialkyl acetylenedicarboxylates with alkyl 2‐[3‐oxo‐3,4‐dihydro‐2(1H)‐quinoxadinylidene]ethanoates in the presence of triphenylphosphine leads to trialkyl (E)‐3‐{3‐oxo‐2‐3,4‐dihydro‐2‐(1H)‐quinoxalinylidene}‐prop‐1‐ene‐1,2,3‐tricarboxylates in good yields.     

Efficient and green synthesis of dihydropyrimido[4,5-b]quinolinetriones using MWCNTs@TEPA/Co (II) as a novel and eco-friendly catalyst

A new heterogeneous nanocatalyst [MWCNTs@TEPA/Co (II)] was successfully prepared using multiwall carbon nanotubes (MWCNTs) as a suitable and efficient support for covalent anchoring of tetraethylene pentaamine (TEPA)/Co (II). The new heterogeneous catalyst was prepared through an easy and applicable method, and characterized by various techniques such as Fourier transform-infrared, thermogravimetric analysis, energy-dispersive X-ray spectroscopy, mapping, field emission-scanning electron microscopy, inductively coupled plasma-optical emission spectrometry and Brunauer−Emmett−Teller. Synthesized catalyst was used efficiently for the preparation of dihydropyrimido [4,5-b]quinolinetrione derivatives via the four-components reaction of barbituric acid, dimedone, aryl aldehyde and amines under thermal conditions. The nanostructure catalyst was easily recovered by filtration and reused several times without noticeable loss of its catalytic activity. Low amounts of catalyst (0.005 g), short reaction times and green conditions are some merits of the presented method.     

Copper and nickel immobilized on cytosine@MCM-41: as highly efficient,reusable and organic–inorganic hybrid nanocatalysts for the homoselective synthesis of tetrazoles and pyranopyrazoles

In this work, a green approach is reported for efficient synthesis of biologically active tetrazole and pyranopyrazole derivatives in the presence of Cu-Cytosine@MCM-41 and Ni-Cytosine@MCM-41 (copper (II) and nickel (II) catalyst on the modified MCM-41 using cytosine). The synthesis of tetrazoles and pyranopyrazoles in the presence of these catalysts was performed in green solvents such as water or poly (ethylene glycol) (PEG). All products were obtained in high TOF (turnover frequency) numbers in the presence of these catalysts, which indicate the high efficiency of these catalysts in the synthesis of tetrazole and pyranopyrazole derivatives. The prepared catalysts were characterized by various techniques such as BET, TGA, XRD, FT-IR, SEM, EDS, WDX, TEM, and AAS. Mesoporous structure of these catalysts was confirmed by nitrogen adsorption–desorption isotherms. These catalysts can be recovered and reused for several runs without significant change in their catalytic activity or metal capacity. The recovered catalysts have been characterized by XRD, SEM, EDS, WDX, FT-IR and AAS techniques, by which their heterogeneous nature has been confirmed.     

Fabrication of durable superhydrophobic nanofibrous filters for oil‐water separation using three novel modified nanoparticles (ZnO‐NSPO,AlOO‐NSPO,and TiO2‐NSPO)

Three reusable and durable superhydrophobic nanofibrous filters were prepared by dip coating the nanofibrous fabric in the three different dispersed solutions of the newly modified nanoparticles (ZnO‐NSPO, AlOO‐NSPO, and titanium dioxide [TiO₂]‐NSPO). The contact angle results proved that the TiO₂‐NSPO coated nanofibrous polyacrylonitrile (PAN) filter was hydrophobic with the water contact angle (WCA) of 141° while the ZnO‐NSPO and AlOO‐NSPO coated nanofibrous PAN filters were superhydrophobic with the WCA of 168° and 152°, respectively. The as‐prepared filters can be utilized as an effective martial for oil‐water separation with separation efficiency of over 98%.     

One‐Pot Synthesis of Novel Pyrrolo[1,2‐a]quinoxaline‐4(5H)‐ones Using Benzene‐1,2‐diamine,Acetylenedicarboxylates, and β‐Nitrostyrene Derivatives

The reaction between a variety of o‐phenylenediamines (=benzene‐1,2‐diamines), dialkyl acetylenedicarboxylates, and derivatives of nitrostyrene (=(E)‐(2‐nitroethenyl)benzene) in the presence of sulfamic acid (SA; H₃NSO₃) as catalyst led to the corresponding pyrrolo[1,2‐a]quinoxaline‐4(5H)‐one derivatives in high yields.     

Conformational Properties of (Z,Z)-, (E,Z)-, and (E,E)-Cycloocta-1,4-dienes

Summary.  Ab initio calculations at the HF/6-31G^* level of theory for geometry optimization and the MP2/6-31G^*//HF/6-31G^* level for a single point total energy calculation are reported for (Z,Z)-, (E,Z)-, and (E,E)-cycloocta-1,4-dienes. The C ₂-symmetric twist-boat conformation of (Z,Z)-cycloocta-1,4-diene was calculated to be by 3.6 kJ·mol⁻¹ more stable than the C _S-symmetric boat-chair form; the calculated energy barrier for ring inversion of the twist-boat conformation via the C _S-symmetric boat-boat geometry is 19.1 kJ·mol⁻¹. Interconversion between twist-boat and boat-chair conformations takes place via a half-chair (C ₁) transition state which is 43.5 kJ·mol⁻¹ above the twist-boat form. The unsymmetrical twist-boat-chair conformation of (E,Z)-cycloocta-1,4-diene was calculated to be by 18.7 kJ·mol⁻¹ more stable than the unsymmetrical boat-chair form. The calculated energy barrier for the interconversion of twist-boat-chair and boat-chair is 69.5 kJ·mol⁻¹, whereas the barrier for swiveling of the trans-double bond through the bridge is 172.6 kJ·mol⁻¹. The C _S symmetric crown conformation of the parallel family of (E,E)-cycloocta-1,4-diene was calculated to be by 16.5 kJ·mol⁻¹ more stable than the C _S-symmetric boat-chair form. Interconversion of crown and boat-chair takes place via a chair (C _S) transition state which is 37.2 kJ·mol⁻¹ above the crown conformation. The axial- symmetrical twist geometry of the crossed family of (E,E)-cycloocta-1,4-diene is 5.9 kJ·mol⁻¹ less stable than the crown conformation. Corresponding author. E-mail: isayavar@yahoo.com Received March 25, 2002; accepted April 3, 2002     

Application of surfactant assisted dispersive liquid-liquid microextraction for sample preparation of chlorophenols in water samples

A simple, rapid, and efficient method, based on surfactant assisted dispersive liquid-liquid microextraction (SA-DLLME), followed by high performance liquid chromatography (HPLC) has been developed for the extraction and determination of chlorophenols as model compounds in environmental water samples. A conventional cationic surfactant called cethyltrimethyl ammonium bromide (CTAB) was used as a disperser agent in the proposed approach. Thirty-five microliter of 1-octanol as an extraction solvent was injected rapidly into 11 mL aqueous sample containing 0.09 mmol L⁻¹ of CTAB, the mixture was then shaken for 3 min to disperse the organic phase. Having the extraction procedure been completed, the mixture was centrifuged and 20 μL of collected phase was injected into HPLC for subsequent analysis. Some parameters such as the type and volume of the extraction solvent, the type and concentration of surfactant, pH, ionic strength, shaking time, extraction temperature and centrifugation time were optimized. The preconcentration factors (PFs) in a range of 187-353 were obtained under the optimum conditions. The linear range, detection limit (S/N = 3), and precision (n = 5) were 0.2-200, 0.1 μg L⁻¹, and 4.7-6.9%, respectively. Tap water, sea water and mineral water samples were successfully analyzed for the existence of chlorophenols using the proposed method.