Thermal and other studies on bivalent metal selenltes

BaSeO₃·2·5H₂O(I), PbSeO₃· 2H₂O(II) and CdSeO₃·3.5H₂O(III) were prepared and analysed. Their hygroscopicity and solubility was investigated. These compounds have high thermal Stability, as shown by their TG and DTA data. IR spectra show multi-dentate coordination of selenite to cations, due to considerable splitting of the asymmetric v₃ and v₄ bands of SeO ₃ ^{2 –} in the 780-730 cm^–1 and 420-325 cm^–1 region.Tentative structures have been proposed involving bridging oxygen atoms.

---

Zusammenfassung BaSeO₃-2.5H₂O(I), PbSeO₃ · 2H₂O(II) und CdSeO₃· 3.5H₂O(III) wurden hergestellt, analysiert sowie deren Hygroskopizität und Löslichkeit untersucht. TG- und DTA-Untersuchungen erweisen die hohe thermische Stabilität dieser Verbindungen. Die IR-Spektren zeigen mehrzählige Koordination von Selenit zu Kationen, was aus einer beträchtlichen Aufspaltung der antisymmetrischenv ₃ undv ₄ Banden von SeO ₃ ^{2 –} im Bereich 780-730cm^–1 bzw. 420-325 cm^–1 hervorgeht. Es wurden versuchsweise Strukturen mit überbrückenden Sauerstoffatomen vorgeschlagen.

---

BaSeO₃· 2,5H₂O, PbSeO₃ · 2H₂O CdSeO₃ · 3,5H₂O . . - , v ₃ v ₄ SeO ₃ ² }- 780-730 420-325 ^–1. , .

     

Iodine trichloride as an analytical reagent for determination of some organic compounds

Procedures are described for the determination of organic compounds with iodine trichloride under Andrews's titration conditions. Samples are directly titrated with iodine trichloride or first reacted with an excess of iodine monochloride, with subsequent titration of the iodine formed. The direct titration is done initially in feebly acid medium, then the acidity is raised (biotin, methionine, cystine and thiomersal). Pre-oxidation with iodine monochloride is used if the organic compound reacts slowly [tryptophan and arsenic(III) compounds] or is determined in bicarbonate medium (hydroxylamine and thiosemicarbazide). The ferrocyanide formed by the reduction of ferricyanide (by thiourea and allylthiourea) can also be titrated. Arsenic(V) compounds are determined after reduction to arsenic(III), and iodine in organic compounds is converted into iodide by alkaline fusion into iodide and the iodide titrated.     

Favorable interactions of amine- and ester-terminated PAMAM with cationic surfactants: photophysical and transport studies

Conductivity (kappa), turbidity (tau), and fluorescence (I1/I3) studies of hexadecyltrimethylammonium bromide (HTAB), hexadecylpyridinium bromide (HPyBr), and hexadecylpyridinium chloride (HPyCl) in aqueous poly(amido amine) (PAMAM) dendrimers of generations 0 to 2.5 G have been carried out. The complexation of surfactant monomers with the PAMAM surface groups is demonstrated by the critical aggregation concentration (cac), which is two to three orders of magnitude less than the micellization of cationic surfactants in aqueous PAMAM and denoted by critical micelle concentration (cmc*). In the presence of aqueous amine-terminated PAMAM, the cmc* value for each surfactant was much lower than the cmc in pure water, while they remain close to each other in the presence of aqueous ester-terminated PAMAM for each surfactant. The fluorescence studies demonstrated that both amine- and ester-terminated PAMAM interact with the cationic surfactants, though the mode of interaction varied due to the different nature of surface groups.     

Spectrophotometric determination of aromatic primary amines and nitrite by flow injection analysis

Aromatic primary amines are determined by injection into dilute hydrochloric acid carrier which merges sequentially with 4-N-methylaminophenol and dichromate. The purple-red color formed by oxidative coupling of amines with 4-N-methylaminophenol is measured at 530 nm. In contrast to the manual procedure, the flow-injection procedure avoided errors arising from the instability of the coupling intermediate, oxidation of the amine, and too great an excess of the oxidant. The method improves the selectivity for certain amines in the presence of those which are sterically hindered or have an electron-deficient aromatic nucleus. Nitrite is determined by diazotization of sulfanilamide and quantifying the residual sulfanilamide by oxidative coupling. The sample thourghout for the assay of amines (0.05–20 μg ml^?1 NH₂-N) and nitrite (1–10 μg ml^?1 NO₂^--N) was 120 h^?1. A system for the consecutive determination of aromatic primary amines and nitrite is decribed.     

Highly efficient electrocatalytic hydrogen evolution promoted by O–Mo–C interfaces of ultrafine β-Mo2C nanostructures

Optimizing interfacial contacts and thus electron transfer phenomena in heterogeneous electrocatalysts is an effective approach for enhancing electrocatalytic performance. Herein, we successfully synthesized ultrafine β-Mo₂C nanoparticles confined within hollow capsules of nitrogen-doped porous carbon (β-Mo₂C@NPCC) and found that the surface layer of molybdenum atoms was further oxidized to a single Mo–O surface layer, thus producing intimate O–Mo–C interfaces. An arsenal of complementary technologies, including XPS, atomic-resolution HAADF-STEM, and XAS analysis clearly reveals the existence of O–Mo–C interfaces for these surface-engineered ultrafine nanostructures. The β-Mo₂C@NPCC electrocatalyst exhibited excellent electrocatalytic activity for the hydrogen evolution reaction (HER) in water. Theoretical studies indicate that the highly accessible ultrathin O–Mo–C interfaces serving as the active sites are crucial to the HER performance and underpinned the outstanding electrocatalytic performance of β-Mo₂C@NPCC. This proof-of-concept study opens a new avenue for the fabrication of highly efficient catalysts for HER and other applications, whilst further demonstrating the importance of exposed interfaces and interfacial contacts in efficient electrocatalysis.

Ultrafine β-Mo₂C nanostructures encapsulated in N-doped carbon capsules featuring O–Mo–C interfaces as the active sites for HER have been unveiled.     

Separation and gravimetric determination of cerium and lanthanum with N-m-tolyl-m-nitrobenzohydroxamic acid

Cerium and lanthanum were determined gravimetrically by selective precipitation with N-m-tolyl-m-nitrobenzohydroxamic acid and separated from several metal ions such as Ag(+), Be(2+) , Pb(2+) , Mn(2+) , Cu(2+), Zn(2+) , Cd(2+) , Hg(2+) , Pd(2+) , Ga(3+) A1(3+) , Bi(3+) , Sb(3+), Sn(4+), Ce(3+) , Pr(3+) , Nd(3+) , Ti(4+), Zr(4+), Th(4+), V(5+) , Mo(6+) and U(6+) . The precipitates were weighted directly after drying at 110 degrees . The analytical results indicated the composition of the complexes to be (C(14)H(11)N(2)O(4))(n)M.     

Corrosion inhibition of mild steel in hydrochloric acid using extract of glycine max leaves

Research on Chemical Intermediates - The activity of glycine max leaves extract against corrosion of mild steel in 0.5 M HCl solution has been investigated at different temperatures...