A convenient route to 1,3-diynes using ligand-free Cadiot–Chodkiewicz coupling reaction at room temperature under aerobic conditions

In this study, we report a copper-catalyzed ligand-free Cadiot–Chodkiewicz coupling reaction. No additives or ligands are required for this Cu-catalyzed C(sp)–C(sp) coupling reaction of terminal alkynes with alkynyl halides. The low cost of copper catalyst, excellent yield of the products, suppression of side-products and mild reaction conditions are the major advantages of this protocol.     

Influence of the addition of aluminium nanoparticles on thermo-rheological properties of hydroxyl-terminated polybutadiene-based composite propellant and empirical modelling

The heat transfer performance and entropy analysis are done in a compact loop heat pipe (CLHP) with Al₂O₃/water and Ag/water nanofluid. A compact loop heat pipe having a flat square evaporator with dimensions of 34 mm (L)?×?34 mm (W)?×?19 mm (H) has been fabricated and tested for the heat load ranging from 30 to 500 W. The experimental tests are conducted by keeping the CLHP in the vertical orientation with distilled water, silver (Ag)/water and aluminium oxide (Al₂O₃)/water nanofluid having low volume concentrations of (0.09% and 0.12%). The effect of wall and vapour temperature, evaporator and condenser heat transfer coefficient, thermal resistance on the applied heat loads is experimentally investigated and compared. The experimental results showed that the evaporator thermal resistance is reduced by 34.70% and 20.21%, respectively, for 0.12 vol% of Ag, Al₂O₃ nanoparticles when compared with that of the distilled water. For the same volume concentrations of Ag, Al₂O₃ nanoparticles, an enhancement of 34.52%, 23.7%, 39.27% and 30.8%, respectively, observed for the convective heat transfer coefficients at the evaporator and condenser. The entropy is also reduced by 19.08% and 11.58% when Ag and Al₂O₃ nanofluids are used as the operating fluid. From the experimental tests, it is found that the addition of small amount of Ag nanoparticles in the working fluid enhanced the operating range by 15% when compared with that of Al₂O₃/water nanofluid without the occurrence of any dry-out conditions.

     

Application of advanced nuclear analytical techniques for the electrocatalyst's characterization: Paving the path for mechanistic investigations

As the application of electrocatalyst continues to expand, envisaging the hidden mechanisms occurring at various length scale affecting the catalytic efficiency became important. To enhance the stability of electrocatalyst and reduce the cost, it is of paramount importance to reveal the active site's dynamics (using in situ techniques for getting the real-time information) which directly affect the reactions such as oxygen evolution reaction, hydrogen evolution reaction, and so on. Since such reactions are crucial for many engineering and scientific applications, in situ characterization techniques are required, which could capture such reactions happening at a different length and time scale. This article analyzes the recent progress made in the field of electrocatalyst's characterization using in situ neutron techniques. The article also paves the future path and has delineated the future challenges involved in multiscale correlative techniques (e.g., neutron techniques in the combination of synchrotron or microscopic techniques) used for getting the multiscale (atomic to micrometer range) mechanistic information about the electrocatalyst's working and degradation.     

Ageratum conyzoides L. and Its Secondary Metabolites in the Management of Different Fungal Pathogens

Ageratum conyzoides L. (Family—Asteraceae) is an annual aromatic invasive herb, mainly distributed over the tropical and subtropical regions of the world. It owns a reputed history of indigenous remedial uses, including as a wound dressing, an antimicrobial, and mouthwash as well as in treatment of dysentery, diarrhea, skin diseases, etc. In this review, the core idea is to present the antifungal potential of the selected medicinal plant and its secondary metabolites against different fungal pathogens. Additionally, toxicological studies (safety profile) conducted on the amazing plant A. conyzoides L. are discussed for the possible clinical development of this medicinal herb. Articles available from 2000 to 2020 were reviewed in detail to exhibit recent appraisals of the antifungal properties of A. conyzoides. Efforts were aimed at delivering evidences for the medicinal application of A. conyzoides by using globally recognized scientific search engines and databases so that an efficient approach for filling the lacunae in the research and development of antifungal drugs can be adopted. After analyzing the literature, it can be reported that the selected medicinal plant effectively suppressed the growth of numerous fungal species, such as Aspergillus, Alternaria, Candida, Fusarium, Phytophthora, and Pythium, owing to the presence of various secondary metabolites, particularly chromenes, terpenoids, flavonoids and coumarins. The possible mechanism of action of different secondary metabolites of the plant against fungal pathogens is also discussed briefly. However, it was found that only a few studies have been performed to demonstrate the plant’s dosage and safety profile in humans. Considered all together, A. conyzoides extract and its constituents may act as a promising biosource for the development of effective antifungal formulations for clinical use. However, in order to establish safety and efficacy, additional scientific research is required to explore chronic toxicological effects of ageratum, to determine the probability of interactions when used with different herbs, and to identify safe dosage. The particulars presented here not only bridge this gap but also furnish future research strategies for the investigators in microbiology, ethno-pharmacology, and drug discovery.     

A light writable microfluidic "flash memory": optically addressed actuator array with latched operation for microfluidic applications

This paper presents a novel optically addressed microactuator array (microfluidic "flash memory") with latched operation. Analogous to the address-data bus mediated memory address protocol in electronics, the microactuator array consists of individual phase-change based actuators addressed by localized heating through focused light patterns (address bus), which can be provided by a modified projector or high power laser pointer. A common pressure manifold (data bus) for the entire array is used to generate large deflections of the phase change actuators in the molten phase. The use of phase change material as the working media enables latched operation of the actuator array. After the initial light "writing" during which the phase is temporarily changed to molten, the actuated status is self-maintained by the solid phase of the actuator without power and pressure inputs. The microfluidic flash memory can be re-configured by a new light illumination pattern and common pressure signal. The proposed approach can achieve actuation of arbitrary units in a large-scale array without the need for complex external equipment such as solenoid valves and electrical modules, which leads to significantly simplified system implementation and compact system size. The proposed work therefore provides a flexible, energy-efficient, and low cost multiplexing solution for microfluidic applications based on physical displacements. As an example, the use of the latched microactuator array as "normally closed" or "normally open" microvalves is demonstrated. The phase-change wax is fully encapsulated and thus immune from contamination issues in fluidic environments.     

Drug and surfactant transport in Cyclosporine A and Brij 98 laden p-HEMA hydrogels

Surfactants are commonly incorporated into hydrogels to increase solute loading and attenuate the release rates. In this paper we focus on understanding and modeling the mechanisms of both surfactant and drug transport in hydrogels. Specifically, we focus on Brij 98 as the surfactant, Cyclosporine A (CyA) as the hydrophobic drug, and poly-hydroxy ethyl methacrylate (p-HEMA) as the polymer. The models developed here are validated by experiments conducted with gels of different thicknesses and surfactant loadings. Also the model is compared with prior experimental studies in literature. The model predicts that the percentage surfactant as well as drug release scales as 1/(surfactant loading)(0.5), and thus a four fold increase in surfactant loading leads to a two fold reduction in percentage release for both drug and surfactant at a given time. The models for the surfactant and drug release are fitted to the experimental data to obtain values of 1.44 x 10(-14) m(2)/s for CyA diffusivity and 414.4 for the partition coefficient between drug concentration inside the micelle and that in the gel. These models can be very helpful in tuning the drug release rates from hydrogels by controlling the surfactant concentration. The results also show that Brij 98 loaded p-HEMA exhibit an extended release of CyA and so contact lenses made with this material can be used for extended ocular delivery of CyA, which is an immunosuppressant drug commonly used for treatment of various ocular ailments.     

Ultrafast spectroscopy of the uranium(IV) and thorium(IV) bis(ketimide) complexes (C5Me5)2An[-N=C(Ph)(CH2Ph)]2 (An = Th, U)

Ultrafast pump-probe spectroscopic studies have been performed on (C 5Me 5) 2U[- N=C(Ph)(CH 2Ph)] 2 and (C 5Me 5) 2Th[- N=C(Ph)(CH 2Ph)] 2 including, for the uranium complex, the first direct measurement of dynamics of electronic deactivation within a 5f-electron manifold. Evidence has been found for strong coupling between the electronic ground state and the f-electron manifold which dominates the dynamics of the excited states of the bis(ketimide) uranium complex. These also demonstrate strong singlet-f manifold coupling, which assists in the deactivation of the photoexcited state of the uranium complex, and provide information on intersystem crossing and internal conversion processes in both complexes.     

Role of backbone-solvent interactions in determining conformational equilibria of intrinsically disordered proteins

Intrinsically disordered proteins (IDPs) are functional proteins that do not fold into well-defined three-dimensional structures under physiological conditions. IDP sequences have low hydrophobicity, and hence, recent experiments have focused on quantitative studies of conformational ensembles of archetypal IDP sequences such as polyglutamine and glycine-serine block copolypeptides. Results from these experiments show that, despite the absence of hydrophobic residues, polar IDPs prefer ensembles of collapsed structures in aqueous milieus. Do these preferences originate in interactions that are unique to polar sidechains? The current study addresses this issue by analyzing conformational equilibria for polyglycine and a glycine-serine block copolypeptide in two environments, namely, water and 8 M urea. Polyglycine, a poly secondary-amide, has no sidechains and is a useful model system for generic polypeptide backbones. Results based on large-scale molecular dynamics simulations show that polyglycine forms compact, albeit disordered, globules in water and swollen, disordered coils in 8 M urea. There is minimal overlap between conformational ensembles in the two environments. Analysis of order parameters derived from theories for flexible polymers show that water at ambient temperatures is a poor solvent for generic polypeptide backbones. Therefore, the experimentally observed preferences for polyglutamine and glycine-serine block copolypeptides must originate, at least partially, in polypeptide backbones. A preliminary analysis of the driving forces that lead to distinct conformational preferences for polyglycine in two different environments is presented. Implications for describing conformational ensembles of generic IDP sequences are also discussed.     

Enhancement of the properties and mesophases stability after the electron beam irradiation on a racemic anti-ferroelectric liquid crystalline mixture

The display parameters and the stability of the various mesophases of a newly synthesised racemic mixture of anti-ferroelectric liquid crystals (AFLCs) have been boosted with the help of the electron beam irradiation. The mixture has phase sequence of isotropic–smectic C–smectic C_A crystal. The effective macroscopic polarisation and transition temperatures of the various mesophases of the irradiated mixture have increased as compared with the pure mixture. The macroscopic polarisation of the mixture has increased from 21 to 27 nC/cm² due to the irradiation. From various studies, we have observed that the temperature range of the smectic C_A phase has increased by 20.6°C with marginal decrease in the temperature range of the smectic C phase.     

Dynamics of a family of transcendental meromorphic functions having rational Schwarzian derivative

In the present paper, a class F of critically finite transcendental meromorphic functions having rational Schwarzian derivative is introduced and the dynamics of functions in one parameter family is investigated. It is found that there exist two parameter values λ^∗=?(0)>0 and , where and is the real root of ?^′(x)=0, such that the Fatou sets of fλ(z) for λ=λ^∗ and λ=λ∗∗ contain parabolic domains. A computationally useful characterization of the Julia set of the function fλ(z) as the complement of the basin of attraction of an attracting real fixed point of fλ(z) is established and applied for the generation of the images of the Julia sets of fλ(z). Further, it is observed that the Julia set of fλ∈K explodes to whole complex plane for λ>λ∗∗. Finally, our results found in the present paper are compared with the recent results on dynamics of one parameter families λtanz, [R.L. Devaney, L. Keen, Dynamics of meromorphic maps: Maps with polynomial Schwarzian derivative, Ann. Sci. École Norm. Sup. 22 (4) (1989) 55-79; L. Keen, J. Kotus, Dynamics of the family λtan(z), Conform. Geom. Dynam. 1 (1997) 28-57; G.M. Stallard, The Hausdorff dimension of Julia sets of meromorphic functions, J. London Math. Soc. 49 (1994) 281-295] and , λ>0 [G.P. Kapoor, M. Guru Prem Prasad, Dynamics of : The Julia set and bifurcation, Ergodic Theory Dynam. Systems 18 (1998) 1363-1383].