Excitation Temperature Measurement of Ar + N2 RF Plasma by Spectroscopic Method

The mixed gas (Ar + N₂) plasma has been generated by a 6 KW, 10.3 MHz radio frequency oscillator. The flame got extinguished if N₂ exceeded more than 20% of Ar. The Boltzmann plot using spectral intensities of Ar I and NI lines in the wavelength range 4000–4510 Å have been used to determine the excitation temperature. The results show that excitation equilibrium between two species exist since the temperatures are found to be nearly same for both species.     

Observation of self-amplified spontaneous emission and exponential growth at 530 nm

Experimental evidence for self-amplified spontaneous emission (SASE) at 530 nm is reported. The measurements were made at the low-energy undulator test line facility at the Advanced Photon Source, Argonne National Laboratory. The experimental setup and details of the experimental results are presented, as well as preliminary analysis. This experiment extends to shorter wavelengths the operational knowledge of a linac-based SASE free-electron laser and explicitly shows the predicted exponential growth in intensity of the optical pulse as a function of length along the undulator.     

The kinetic limitation of anti-stokes luminescence of Er3+ and Yb3+ doped infrared upconversion materials

Infrared-to-visible wave-length conversion in the Yb³⁺−Er³⁺ doped phosphors system has been described by a simple three level model based on two ions mechanism. The excitation in the range of 900–1000 nm of an IR-photon is first absorbed by Yb³⁺ ion as a sensitizer attributed to the resonant energy transition in Er³⁺ ion from ⁴ I _3/2 → ⁴ S _15/2 and ¹ F _9/2 → ⁴ I _15/2, respectively for green and red emission. The essential energy transfer processes in this system i.e. upconversion from ⁴ I _11/2 and ¹ I _13/2, cross-relaxation from ⁴ S _3/2 and ¹ F _9/2 are taken into account. The limitations of the rate-equation approach are examined with a focus on the underlying dynamics of this rare-earth system.     

Electromagnetic shielding studies on plasma‐sprayed superconducting high-TC coatings

Electromagnetic shielding behaviour of plasma-sprayed Y₁Ba₂Cu₃O_7-x coatings has been studied in the frequency range of 1 to 100 kHz. Experiments with 180 μm thick coatings on stainless-steel substrates have shown that the normal-to-superconducting phase transition introduces an additional 15 to 20 db shielding.     

Study of nuclear tracks on different polycarbonate foils and their feasibility for use in personnel monitoring

CR-39 (PADC) a Solid State Nuclear Track Detector., is used as a routine personnel monitor. 1800 workers are being monitored quarterly for fast neutron using CR-39 foils. These foils procured from Pershore Mouldings, UK are very expensive and indigenous development will make the foils cost effective. The aim of this paper is to find a suitable alternative to the imported CR-39 foils for use in personnel monitoring. The foils from three different manufacturers have been compared with the CR-39 foils from Pershore Moulding, UK, presently in use. Out of the three, only sample no 1 is promising. It has a background and sensitivity comparable with CR-39 presently used. The sample 2 is CR-39 being developed in India, has a relatively high background and poor sensitivity. Efforts are being made to improve the quality of this sample. The sample 3 was a poly carbonate from local manufacturer which produced very few tracks and the standard deviation of track counts was very large and hence not useful for Personnel Monitoring.      

Metal matrix composite solidification in the presence of cooled fibers: numerical simulation and experimental observation

Attempts have been made to alter the solidification microstructures of fiber reinforced aluminum composites by cooling the ends of the fibers extending out of the mold. Experimental observations indicate that cooling the extended ends of the reinforcement results in finer microstructures in the matrix and changes the nature of the interface. In this paper, numerical simulation is performed on a two-dimensional axi-symmetric model to investigate the solidification process of metal matrix composite (MMC) with the extended ends of the fibers cooled by a heat sink. The numerical simulation is based on the source-based enthalpy method with finite volume discretization. The temperature profiles obtained by simulation are compared to the cooling curves measured experimentally in order to validate the current mathematical model. It is found that the simulation result matches the experimental data with reasonable agreement.     

Numerical simulation and experimental study of solidification of squeeze cast aluminum composites in the presence of cooled fibers

In order to improve the material properties of fiber-reinforced aluminum composites, experimental research has been carried out to create finer matrix microstructures and novel interfaces between aluminum matrix (A2014) and carbon fibers using a modified pressure infiltration technique. In this novel process the ends of the fibers extending outside the mold are cooled by using a variety of heat sinks. Solidification microstructures show that the dendrite arm spacing in between and around the fibers are much finer than in the region where there are no fibers. This suggests the possibility of refining the matrix microstructures by cooling the fibers extending out of the mold. A numerical simulation is also performed to study the solidification process of aluminum matrix by finite volume method. The cooling curves obtained by the simulation are compared with the experimentally measured cooling curves in order to validate the numerical model. It is found that the simulation result closely matches the experimentally obtained data.     

Simulation of metal matrix composite solidification in the presence of cooled fibers

Metal matrix composite (MMC) has been well known for its superior material properties compared with traditional composite. A new method is introduced to improve the properties of MMC in the sense that the ends of the reinforcement phase of the composite are allowed to extend out of the mold and cooled by a heat sink in order to promote the rate of heat transfer through the fibers and promote the formation of primary alpha phase around the reinforcement. This paper presents the experimental results obtained from the foundry in the University of Wisconsin-Milwaukee and some numerical simulation results of the solidification process in the cast mold.