Automated multi-attribute method sample preparation using high-throughput buffer exchange tips

Rationale

The multi-attribute method (MAM) has become a valuable mass spectrometry (MS)-based tool that can identify and quantify the site-specific product attributes and purity information for biotherapeutics such as monoclonal antibodies (mAbs) and fusion molecules in recent years. As we expand the use of the MAM at various stages of drug development, it is critical to enhance the sample preparation throughput without additional chemical modifications and variability.

Methods

In this study, a fully automated MAM sample preparation protocol is presented, where rapid desalting in less than 15 minutes is achieved using miniaturized size-exclusion chromatography columns in pipette tips on an automated liquid handler. The peptide samples were analyzed using an electrospray ionization (ESI) orbitrap mass spectrometer coupled to an ultra-high-performance liquid chromatography (UHPLC) system with a dual column switching system.

Results

No significant change was observed in product attributes and their quantities compared with manual, low-artifact sample preparation. The sample recovery using the buffer exchange tips was greatly enhanced over the manual spin cartridges while still demonstrating excellent reproducibility for a wide variety of starting sample concentrations. Unlike a plate desalting system, the individual columns provide flexibility in the number of samples prepared at a time and sample locations within plates.

Conclusions

This automated protocol enables the preparation of up to 96 samples with less “at-bench” time than the manual preparation of a smaller batch of samples, thereby greatly facilitating support of process development and the use of the MAM in quality control.

     

Capacitive-discharge-heated anisotropic pyrolytic graphite furnace used for atomic absorption spectrometry Part 2. Experimental Verification of Temperature Distribution of the Furnace Surface and of the Gas Phase

The predictions of a theoretical model, embodied in a computer program, describing the heating characteristics of the furnace surface and the gas phase of an anisotropic pyrolytic graphite furnace heated by the capacitive discharge technique are compared with the experimental results obtained by optical pyrometry and by two-line atomic absorption spectrometry, respectively. The surface temperature gradient around the circumference of the type 1 furnace and along the optical axis of the type 3 furnace are calculated and compared with the measured temperatures. The weighted-average of the theoretically predicted gas temperature is in reasonable agreement with the effective vapour temperature measured by two-line atomic absorption method. The heating rate of the furnace does not have a significant effect on the temperature distribution of either the furnace surface or the gas phase. The effect of the difference in the temperature distribution of the type 1 and type 3 furnaces on the atomic absorption signals is also discussed.     

Enhanced ethanol sensing properties of WO3 modified TiO2 nanorods

Pristine and WO₃ decorated TiO₂ nanorods (NRs) were synthesised to investigate n-n-type heterojunction gas sensing properties. TiO₂ NRs were fabricated via hydrothermal method on fluorine-doped tin oxide coated glass (FTO) substrates. Then, tungsten was sputtered on the TiO₂ NRs and thermally oxidised to obtain WO₃ nanoparticles. The heterostructure was characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX) spectroscopy. Fabricated sensor devices were exposed to VOCs such as toluene, xylene, acetone and ethanol, and humidity at different operation temperatures. Experimental results demonstrated that the heterostructure has better sensor response toward ethanol at 200 °C. Enhanced sensing properties are attributed to the heterojunction formation by decorating TiO₂ NRs with WO₃.     

Near-Ultraviolet Circular Dichroism and Two-Dimensional Spectroscopy of Polypeptides

A fully quantitative theory of the relationship between protein conformation and optical spectroscopy would facilitate deeper insights into biophysical and simulation studies of protein dynamics and folding. In contrast to intense bands in the far-ultraviolet, near-UV bands are much weaker and have been challenging to compute theoretically. We report some advances in the accuracy of calculations in the near-UV, which were realised through the consideration of the vibrational structure of the electronic transitions of aromatic side chains.     

Phenolic compounds,essential oil composition,and antioxidant activity of Angelica purpurascens (Avé-Lall.) Gill

In this study, methanol extracts (MEs) and essential oil (EO) of Angelica purpurascens (Avé-Lall.) Gill obtained from different parts (root, stem, leaf, and seed) were evaluated in terms of antioxidant activity, total phenolics, compositions of phenolic compound, and essential oil with the methods of 2,2-azino-bis(3ethylbenzo-thiazoline-6-sulfonic acid (ABTS•⁺), 2,2-diphenyl-1-picrylhydrazil (DPPH•) radical scavenging activities, and ferric reducing/antioxidant power (FRAP), the Folin–Ciocalteu, liquid chromatography−tandem mass spectrometry (LC−MS/MS), and gas chromatography-mass spectrometry (GC−MS), respectively. The root extract of A. purpurascens exhibited the highest ABTS•⁺, DPPH•, and FRAP activities (IC₅₀: 0.05 ± 0.0001 mg/mL, IC₅₀: 0.06 ± 0.002 mg/mL, 821.04 ± 15.96 µM TEAC (Trolox equivalent antioxidant capacity), respectively). Moreover, EO of A. purpurascens root displayed DPPH• scavenging activity (IC₅₀: 2.95 ± 0.084 mg/mL). The root extract had the highest total phenolic content (438.75 ± 16.39 GAE (gallic acid equivalent), µg/mL)). Twenty compounds were identified by LC−MS/MS. The most abundant phenolics were ferulic acid (244.39 ± 15.64 μg/g extract), benzoic acid (138.18 ± 8.84 μg/g extract), oleuropein (78.04 ± 4.99 μg/g extract), and rutin (31.21 ± 2.00 μg/g extract) in seed, stem, root, and leaf extracts, respectively. According to the GC−MS analysis, the major components were determined as α-bisabolol (22.93%), cubebol (14.39%), α-pinene (11.63%), and α-limonene (9.41%) among 29 compounds. Consequently, the MEs and EO of A. purpurascens can be used as a natural antioxidant source.     

Condensed thiophenes and selenophenes: thionyl chloride and selenium oxychloride as sulfur and selenium transfer reagents

3,4-Cyanomethyl substituted thiophenes reacted with thionyl chloride in the presence of base to give dicyano substituted thieno(3,4-c)thiophenes. The use of selenium oxychloride furnished the corresponding cyano substituted seleno(3,4-c)thiophene. 1,2-Phenylenediacetonitriles gave the corresponding cyano substituted benzo(c)thiophenes and benzo(c)selenenophenes, respectively, upon reaction with thionyl chloride and selenium oxychloride in the presence of base.     

Synthesis,characterization, and crystal structures of organonickel(II) complexes coordinated to novel 1‐bromo‐2,6‐bis{[(λ5‐phosphanylidene)imino]methyl}benzene NCN‐pincer ligands

A novel family of four 1‐bromo‐2,6‐bis{[(λ⁵‐phosphanylidene)imino]methyl}benzene ligands has been synthesized and characterized. The phosphiniminomethyl substituents are decorated with either three phenyl groups, two phenyl and one cyclohexyl group, one phenyl and two cyclohexyl groups, or three cyclohexyl groups. Each ligand was metallated using zero‐valent nickel through an oxidative addition to form a family of organonickel(II) complexes, namely (2,6‐bis{[(triphenyl‐λ⁵‐phosphanylidene)imino]methyl}phenyl‐κ³N,C¹,N′)bromidonickel(II) dichloromethane hemisolvate, [NiBr(C₄₄H₃₇N₂P₂)]·0.5CH₂Cl₂, (2,6‐bis{[(cyclohexyldiphenyl‐λ⁵‐phosphanylidene)imino]methyl}phenyl‐κ³N,C¹,N′)bromidonickel(II) diethyl ether hemisolvate, [NiBr(C₄₄H₄₉N₂P₂)]·0.5C₄H₁₀O, (2,6‐bis{[(dicyclohexylphenyl‐λ⁵‐phosphanylidene)imino]methyl}phenyl‐κ³N,C¹,N′)bromidonickel(II), [NiBr(C₄₄H₆₁N₂P₂)], and (2,6‐bis{[(tricyclohexyl‐λ⁵‐phosphanylidene)imino]methyl}phenyl‐κ³N,C¹,N′)bromidonickel(II), [NiBr(C₄₄H₇₃N₂P₂)]. This family of complexes represents a useful opportunity to investigate the impact of incrementally changing the steric characteristics of a complex on its structure and reactivity.     

Immobilization and electrochemical redox behavior of cytochrome c on fullerene film-modified electrodes

Two different fullerene film-modified electrodes were prepared and used for surface immobilization and electrochemical property investigation of horse heart cytochrome c (cyt c). Both a pristine fullerene film and fullerene-palladium (C(60)-Pd) polymer film-modified platinum, glassy carbon and indium-tin-oxide (ITO) electrodes were used. The immobilized cyt c was characterized by piezoelectric microgravimetry at a quartz crystal microbalance (QCM), UV-visible absorption, and X-ray photoelectron spectroscopy (XPS), as well as cyclic voltammetry (CV) techniques. The UV-visible spectral studies revealed a small blue shift of both the Soret and Q band of the heme moiety of cyt c, immobilized on the C(60)-Pd polymer film-modified ITO electrode, as compared to the bands of cyt c in solution suggesting that molecules of cyt c are densely packed onto the surface of the modified electrode. The CV studies revealed a quasi-reversible electrode behavior of the heme moiety indicating the occurrence of kinetically hindered electron transfer. A good agreement was found between the values of cyt c electrode surface coverage determined by piezoelectric microgravimetry and cyclic voltammetry. For piezoelectric microgravimetry, these values ranged from 0.5 x 10(-10) to 2.5 x 10(-10) mol cm(-2), depending upon the amount of cyt c present in solution and the time allowed for immobilization, which compared with a value of 3.6+/-0.4 x 10(-10) mol cm(-2) determined by CV. The possible mechanisms of cyt c immobilization on the C(60) film and C(60)-Pd film-modified electrodes are also discussed.