Regioselective hydroborations of methylvinylchlorosilanes

The regioselectivity of the hydroboration of the methylchlorovinylsilanes, Cl_nMe_3?nSiCHCH₂ (n= 0 ? 3), has been investigated using BH₃←THF, 9-BBN, disiamyl- and dicyclohexylborane. Methylation of the adducts with methylmagnesium bromide is complicated by formation of tetraalkylboronates. Alkaline hydrogen peroxide oxidation of the boronates gives reasonable yields of the corresponding α- and β-trimethylsilylethanols forn= 0 and 1. Forn= 2 and 3, conversion of the adducts to the corresponding α- and β- deuteroethylsilanes by treatment with excess sodium methoxide in methanol-0-d provides a more effective means of derivatization. Addition of the alkenes,n= 2 or 3, to excess BH₃←THF givesca. 90% of the α-boro-organo-chlorosilanes. For all of the alkenes, the dialkylboranes giveca. 80% of the β-boron adducts.     

Synthesis, crystal structure, and nonlinear optical behavior of beta-unsubstituted meso-meso E-vinylene-linked porphyrin dimers

[structure: see text] A vinylene-linked porphyrin dimer, with no substituents at the beta-positions, has been synthesized by CuI/CsF promoted Stille coupling. In the crystal structure of this dimer, the C(2)H(2) bridge is twisted by 45 degrees relative to the plane of the porphyrins. The absorption, emission spectra, and electrochemistry reveal substantial porphyrin-porphyrin pi-conjugation. The triplet excited-state absorption spectrum of this dimer makes it suitable for reverse saturable absorption at 710-900 nm.     

Condensed thiophenes and selenophenes: thionyl chloride and selenium oxychloride as sulfur and selenium transfer reagents

3,4-Cyanomethyl substituted thiophenes reacted with thionyl chloride in the presence of base to give dicyano substituted thieno(3,4-c)thiophenes. The use of selenium oxychloride furnished the corresponding cyano substituted seleno(3,4-c)thiophene. 1,2-Phenylenediacetonitriles gave the corresponding cyano substituted benzo(c)thiophenes and benzo(c)selenenophenes, respectively, upon reaction with thionyl chloride and selenium oxychloride in the presence of base.     

Dihydroaromatic compounds in the Diels-Alder reaction—IV : Synthesis of bicyclic ketones

The in situ isomerisation and Diels-Alder reaction with 2-acetoxyacrylonitrile, of 2,5-dihydroanisole, leads to the adducts (1) which may be used as starting point for the synthesis of a number of bicyclo [2,2,2] octenones, bicyclo [3,2,1] octenones and bicyclo [3,2,2] nonenones. Under similar conditions, 2,5-dihydrotoluene reacts via an ene-reaction to produce, after hydrolysis, the acetylcyclohexadiene (27). The base-catalysed equilibration and subsequent Diels-Alder reactions of 2,5-dihydrotoluene have been investigated.     

Printed plastic electronics and paperlike displays

Plastic electronic materials and high‐resolution printing methods may be important technologies for new classes of consumer electronic devices that are lightweight, mechanically flexible and bendable, and that can cover large areas at low cost. This article summarizes some of our recent work in this area. It focuses on the materials and patterning techniques that we used to produce plastic active‐matrix backplane circuits for a type of paperlike display. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3327–3334, 2002     

N-substituted salicylaldimine complexes of rhodium(III) and related rhodium(III) organometallic derivatives

A series of new Rh^III complexes with N-substituted salicylaldimines have been prepared of the form [RhSBPy₂]PF₆ where SB is a tetradentate N,N′-substituted bis(salicylaldimine) or represents two molecules of a corresponding bidentate derivative. Several of these complexes have been reduced with 0.5% sodium amalgam and the products reacted with CH₃I to yield the organometallic derivatives CH₃RhSBPy.     

The electric dipole moment of the hydrogen-bonded heterodimer HCN⋯HF. An investigation of the conditions leading to inadequacy of the second- and fourth-order perturbation theories of the Stark effect for linear molecules

We have detected large deviations of the M_J = 0, J = 2 ← 1 Stark effect transition in the linear molecule HCN?HF from predictions of second-, and even fourth-, order perturbation theory. In order to account satisfactorily for the observed effect it has been necessary to set up and diagonalize the appropriate energy matrix. Smaller deviations in the case of M_J = 1, J = 2 ← 1 have likewise been treated. The values of the electric dipole moment for HCN?HF calculated from these transitions, which show large and small deviations from second-order theory, and from one (M_J = 3, J = 4 ← 3) which shows effectively zero deviation, are now consistent and are as follows:

     

38.

Synthesis and characterization of poly(ethylene oxide-co-ethylene sulfone)s and their precursors: Poly(ethylene oxide-co-ethylene sulfide)s     

Tianhong Zhang  Morton H. Litt  Charles E. Rogers 《Journal of polymer science. Part A, Polymer chemistry》1994,32(7):1323-1330

Three poly(ethylene oxide-co-ethylene sulfide)s with oxygen to sulfur ratios of 2/1, 2/2, and 1/2 were prepared by phase-transfer catalyzed polycondensations of (1) sodium sulfide and 1,2-bis (2-chloroethoxy)ethane, (2) 1,2-ethanedithiol and 1,2-bis(2-chloroethoxy)ethane, and (3) 1,2-ethanedithiol and 2-chloroethyl ether, respectively. A buffered solution with pH between the pK_a of the monothiol (RSH) and the pK_a2 of the dithiol (HS–R–SH), or H₂S, was needed to obtain high molecular weight polymers, which suggests that nucleophiles transfer and react as monoanions rather than dianions. These poly(ethylene oxide-co-ethylene sulfide)s were oxidized completely to poly(ethylene oxide-co-ethylene sulfone)s using 3-chloroperoxybenzoic acid as oxidant. Both the final polymers and the precursors have regular sequenced structures and are semicrystalline. As expected, their glass transition temperatures and melting points increase and solubilities decrease with the decrease of ether oxygen to sulfur ratio. © 1994 John Wiley & Sons, Inc.     

39.

Perfectly alternating segmented polyimide-polydimethyl siloxane copolymers via transimidization     

M. E. Rogers  T. E. Glass  S. J. Mecham  D. Rodrigues  G. L. Wilkes  J. E. McGrath 《Journal of polymer science. Part A, Polymer chemistry》1994,32(14):2663-2675

New strategies for the synthesis of perfectly alternating segmented polyimide-polydimethyl siloxane copolymers were developed by utilizing a transimidization method. Imide oligomers endcapped with 2-aminopyrimidine were reacted with aminopropyl terminated (dimethyl siloxane) oligomers to afford perfectly alternating segmented imide siloxane copolymers. The polymerization was conducted in solvents such as chlorobenzene and chlorofrom. High molecular weight, fully imidized perfectly alternating segmented imide siloxane copolymers were obtained within 2 h at temperatures of 60-110°C. The mechanism of the reaction was further elucidated via model compounds and NMR characterization. The block copolymers exhibited two T_gs due to the microphase separation of the polyimide and polysiloxane phases. The T_g of the polyimide phase was a function of the length of the polyimide block. However, partial phase mixing was also evident from the DSC results on the imide siloxane copolymers prepared with low molecular weight polyimide segments. Thermooxidative stability and tensile properties of the perfectly alternating segmented imide siloxane copolymers were found to be principally dependent on the amount of poly (dimethyl siloxane) incorporated in the copolymer and did not correlate with the poly (dimethyl siloxane) or polyimide block lengths. The stress-strain behavior of both solvent cast films or molded films is also reported. © 1994 John Wiley & Sons, Inc.     

40.

Preparation and properties of dinitrogen complexes of molybdenum and tungsten with trimethylphosphine as coligand : III. Synthesis and properties of cis-[W(N2)2(PMe3)4], trans-[W(C2H4)2(PMe3)4] and [M(N2)(PMe3)5] (M = Mo,W). The crystal and molecular structure of [Mo(N2)(PMe3)5]     

Ernesto Carmona  Jose M. Marin  Manuel L. Poveda  Robin D. Rogers  Jerry L. Atwood 《Journal of organometallic chemistry》1982,238(4):C63-C66

The reduction of [WCl₄(PMe₃)₃] with dispersed sodium, under dinitrogen, gives cis-[W(N₂)₂(PMe₃)₄], while under ethylene trans-[W(C₂H₄)₂(PMe₃)₄] is obtained. The ethylene complex can also be prepared by displacement of the dinitrogen molecules in cis-[W(N₂)₂(PMe₃)₄] by ethylene at room temperature and pressure. Interaction of cis-[M(N₂)₂(PMe₃)₄] complexes (M = Mo, W), with PMe₃, under helium or argon, yields [M(N₂)(PMe₃)₅]. The molybdenum complex crystallizes in the orthorhombic space group Pnma, with a 22.063(6), b 12.106(4), c 9.745(4) Å. The Mo—P distance trans to the dinitrogen ligand (2.483(7) Å) is slightly longer than the average of the other four Mo—P bonds (2.460(5) Å).     

[首页] « 上一页 [1] [2] [3] 4 [5] [6] [7] [8] [9] [10] [11] 下一页 » 末  页»

$\text{J + 1 ← J}$	$\text{M}{}_{\mathrm{J}}$		μ/D
2 ← 1	0		5.627
	1		5.601
4 ← 3	3		5.608
		Mean	5.612

Synthesis and characterization of poly(ethylene oxide-co-ethylene sulfone)s and their precursors: Poly(ethylene oxide-co-ethylene sulfide)s

Three poly(ethylene oxide-co-ethylene sulfide)s with oxygen to sulfur ratios of 2/1, 2/2, and 1/2 were prepared by phase-transfer catalyzed polycondensations of (1) sodium sulfide and 1,2-bis (2-chloroethoxy)ethane, (2) 1,2-ethanedithiol and 1,2-bis(2-chloroethoxy)ethane, and (3) 1,2-ethanedithiol and 2-chloroethyl ether, respectively. A buffered solution with pH between the pK_a of the monothiol (RSH) and the pK_a2 of the dithiol (HS–R–SH), or H₂S, was needed to obtain high molecular weight polymers, which suggests that nucleophiles transfer and react as monoanions rather than dianions. These poly(ethylene oxide-co-ethylene sulfide)s were oxidized completely to poly(ethylene oxide-co-ethylene sulfone)s using 3-chloroperoxybenzoic acid as oxidant. Both the final polymers and the precursors have regular sequenced structures and are semicrystalline. As expected, their glass transition temperatures and melting points increase and solubilities decrease with the decrease of ether oxygen to sulfur ratio. © 1994 John Wiley & Sons, Inc.     

Perfectly alternating segmented polyimide-polydimethyl siloxane copolymers via transimidization

New strategies for the synthesis of perfectly alternating segmented polyimide-polydimethyl siloxane copolymers were developed by utilizing a transimidization method. Imide oligomers endcapped with 2-aminopyrimidine were reacted with aminopropyl terminated (dimethyl siloxane) oligomers to afford perfectly alternating segmented imide siloxane copolymers. The polymerization was conducted in solvents such as chlorobenzene and chlorofrom. High molecular weight, fully imidized perfectly alternating segmented imide siloxane copolymers were obtained within 2 h at temperatures of 60-110°C. The mechanism of the reaction was further elucidated via model compounds and NMR characterization. The block copolymers exhibited two T_gs due to the microphase separation of the polyimide and polysiloxane phases. The T_g of the polyimide phase was a function of the length of the polyimide block. However, partial phase mixing was also evident from the DSC results on the imide siloxane copolymers prepared with low molecular weight polyimide segments. Thermooxidative stability and tensile properties of the perfectly alternating segmented imide siloxane copolymers were found to be principally dependent on the amount of poly (dimethyl siloxane) incorporated in the copolymer and did not correlate with the poly (dimethyl siloxane) or polyimide block lengths. The stress-strain behavior of both solvent cast films or molded films is also reported. © 1994 John Wiley & Sons, Inc.     

Preparation and properties of dinitrogen complexes of molybdenum and tungsten with trimethylphosphine as coligand : III. Synthesis and properties of cis-[W(N2)2(PMe3)4], trans-[W(C2H4)2(PMe3)4] and [M(N2)(PMe3)5] (M = Mo,W). The crystal and molecular structure of [Mo(N2)(PMe3)5]

The reduction of [WCl₄(PMe₃)₃] with dispersed sodium, under dinitrogen, gives cis-[W(N₂)₂(PMe₃)₄], while under ethylene trans-[W(C₂H₄)₂(PMe₃)₄] is obtained. The ethylene complex can also be prepared by displacement of the dinitrogen molecules in cis-[W(N₂)₂(PMe₃)₄] by ethylene at room temperature and pressure. Interaction of cis-[M(N₂)₂(PMe₃)₄] complexes (M = Mo, W), with PMe₃, under helium or argon, yields [M(N₂)(PMe₃)₅]. The molybdenum complex crystallizes in the orthorhombic space group Pnma, with a 22.063(6), b 12.106(4), c 9.745(4) Å. The Mo—P distance trans to the dinitrogen ligand (2.483(7) Å) is slightly longer than the average of the other four Mo—P bonds (2.460(5) Å).