Reactions of Molecules with Two Equivalent Functional Groups. 5. Anomalous Reactivity of 1,10-Cyclooctadecanedione. Crystal and Molecular Structures of cis,cis-1,10-Diphenyl-1,10-cyclooctadiene and the Stereoisomers of 1,10-Diphenyl-1,10-cyclooctadecanediol(1)

The reaction of the title diketone (3) with phenyl Grignard produces (with rate constant k(1)) the conjugate base (6-M) of 10-hydroxy-10-phenylcyclooctadecanone (6), which is subsequently converted (with rate constant k(2)) to the conjugate base of the title diol, as a mixture of the cis (7, 55%) and trans (8, 45%) isomers. The ratio k(2)/k(1), 2.2 +/- 0.4, indicates that the carbonyl group in 6-M is 4.4 times as reactive as each carbonyl in 3. Competition experiments further demonstrate that the relative rates (per carbonyl) for addition of phenylmagnesium bromide to 3, 10-methylenecyclooctadecanone (11), and cyclopentadecanone (12) are 1.0:0.60:1.92. Possible reasons for this order of reactivity are discussed. Diols 7 and 8 undergo facile double dehydration to form the title diene 13, which is predicted by molecular mechanics calculations to be the most stable of the four possible symmetrical diene isomers. The structures of 7, 8, and 13 were secured by single-crystal X-ray studies.     

Surface chemistry studies of (CdSe)ZnS quantum dots at the air-water interface

Trioctylphosphine oxide- (TOPO-) capped (CdSe)ZnS quantum dots (QDs) were prepared through a stepwise synthesis. The surface chemistry behavior of the QDs at the air-water interface was carefully examined by various physical measurements. The surface pressure-area isotherm of the Langmuir film of the QDs gave an average diameter of 4.4 nm, which matched very well with the value determined by transmission electron microscopy (TEM) measurements if the thickness of the TOPO cap was counted. The stability of the Langmuir film of the QDs was tested by two different methods, compression/decompression cycling and kinetic measurements, both of which indicated that TOPO-capped (CdSe)ZnS QDs can form stable Langmuir films at the air-water interface. Epifluorescence microscopy revealed the two-dimensional aggregation of the QDs in Langmuir films during the early stage of the compression process. However, at high surface pressures, the Langmuir film of QDs was more homogeneous and was capable of being deposited on a hydrophobic quartz slide by the Langmuir-Blodgett (LB) film technique. Photoluminescence (PL) spectroscopy was utilized to characterize the LB films. The PL intensity of the LB film of QDs at the first emission maximum was found to increase linearly with increasing number of layers deposited onto the hydrophobic quartz slide, which implied a homogeneous deposition of the Langmuir film of QDs at surface pressures greater than 20 mN.m(-1).     

Über Pterinchemie. 79. Mitteilung. 13C-und 15N-NMR.-spektroskopische Untersuchungen an der (6RS)-5, 10-Methylen-5, 6, 7, 8-tetrahydro-L-folsäure; eindeutiger Beweis ihrer Struktur

¹³C- and ¹⁵N-NMR.-Spectroscopic Studies on (6RS)-5, 10-Methylene-5, 6, 7, 8-tetrahydro-L -folic Acid; Unequivocal Proof of thier Structure The existence of a 5, 10-methylene bridge in the title compound has been established with the help of ¹⁵N-NMR, and ¹³C-NMR. spectroscopy. The simultaneous coupling of ¹³C(11) with ¹⁵N(5) and ¹⁵N(10) proves that C(11) must be bound as a methylene bridge to both N-atoms. Some other aspects of the NMR. spectra of the compound are discussed. Synthesis of the title product with the label ¹⁵N is described.     

The binding selectivity of ADAR2's dsRBMs contributes to RNA-editing selectivity

ADAR2 is an RNA editing enzyme that deaminates adenosines in certain duplex structures. Here, we describe the role of its RNA binding domain, consisting of two copies of a common dsRNA binding motif (dsRBM), in editing site selectivity. ADAR2's dsRBMs bind selectively on a duplex RNA that mimics the Q/R editing site in the glutamate receptor B-subunit pre-mRNA. This selectivity is different from that of PKR's dsRBM I, indicating that dsRBMs from different proteins possess intrinsic binding selectivity. Using directed hydroxyl radical cleavage data, molecular models were developed that predict important recognition surfaces on the RNA for identified dsRBM binding sites. Blocking these surfaces by benzyl modification of guanosine 2-amino groups impeded RNA-editing, demonstrating a correlation between deamination efficiency by ADAR2 and selective binding by its dsRBMs. In addition, the editing activity of a mutant of ADAR2 lacking dsRBM I on N(2)-benzylguanosine-modified RNA suggests the location of the dsRBM I binding site that leads to editing at the GluR-B Q/R site.     

Myoglobin-CO substate structures and dynamics: multidimensional vibrational echoes and molecular dynamics simulations

Spectrally resolved infrared stimulated vibrational echo data were obtained for sperm whale carbonmonoxymyoglobin (MbCO) at 300 K. The measured dephasing dynamics of the CO ligand are in agreement with dephasing dynamics calculated with molecular dynamics (MD) simulations for MbCO with the residue histidine-64 (His64) having its imidazole epsilon nitrogen protonated (N(epsilon)-H). The two conformational substate structures B(epsilon) and R(epsilon) observed in the MD simulations are assigned to the spectroscopic A(1) and A(3) conformational substates of MbCO, respectively, based on the agreement between the experimentally measured and calculated dephasing dynamics for these substates. In the A(1) substate, the N(epsilon)-H proton and N(delta) of His64 are approximately equidistant from the CO ligand, while in the A(3) substate, the N(epsilon)-H of His64 is oriented toward the CO, and the N(delta) is on the surface of the protein. The MD simulations show that dynamics of His64 represent the major source of vibrational dephasing of the CO ligand in the A(3) state on both femtosecond and picosecond time scales. Dephasing in the A(1) state is controlled by His64 on femtosecond time scales, and by the rest of the protein and the water solvent on longer time scales.     

Deoxy-nitrosugars 12th communication Synthesis of isosteric mono-phosphonate analogues of β-and α-D-fructose 2,6-bisphosphate

A synthesis of the isosteric mono-phosphonate analogues 2a and 19 of the β-and α-D -fructose 2,6-bisphosphate, respectively, is described. Chain elongation of the 1-deoxy-1-nitro-D -arabinose 3 (Scheme 1) by a Henry reaction with paraformaldehyde followed by protection of the resulting alcohol (methoxymethyl ether) and a radical-chain substitution by nitromethane anion gave the key intermediates, the gluco-anhydroalditol 6 and the manno-anhydroalditol 7 . These products equilibrated under basic conditions. Conversion of 7 to the aldehyde 9 , Abramov reaction of 9 with diphenyl phosphite followed by deoxygenation according to Barton gave the phosphonate 11 (Scheme 2). Selective hydrogenolysis of 11 , phosphorylation and deprotection gave 2 which was converted to the tetrasodium salt 2a . Similarly, 6 was transformed into the isosteric phosphonate analogue 19 of the α-D -fructose 2,6-bisphosphate (Scheme 3).     

Uranium-sulfilimine chemistry. The preparation of Cp2*UCl2(HNSPh2) and its hydrolysis with HNSPh2 · H2O

The reaction of Cp₂*UCl₂ with HNSPh₂ produces Cp₂*UCl₂(HNSPh₂), which is the first structurally characterized complex of a sulfilimine. The hydrolysis of Cp₂*UCl₂(HNSPh₂) with HNSPh₂ · H₂O yields a tetrauranium cluster whose heavy atom structure has been determined by x-ray diffraction and which is formulated as a U^IV/U^V complex: [Cp*(Cl)(HNSPh₂)U(μ₃-O)(μ₂-O)₂U(Cl)(HNSPh₂)₂]₂.     

Fragmentation of Homoallylic Alkoxides. Preparation of 1-(3′-cyclopentenyl)-2-alkanones from 2-substituted bicyclo[2.2.1]hept-5-en-2-ols

The potassium 2-substituted bicyclo[2.2.1]hept-5-en-2-alkoxides derived from alcohols 2–9 at 30° in hexamethylphosphoric triamide (HMPA) afford 1-(3′-cyclopentenyl)-2-alkanones 10–19 via heterolytic C(1), C(2)-allylic bond cleavage in the substrate alkoxide followed by intramolecular protonation of the resultant transient allylic anion.     

Synthesis of functionalized rab GTPases by a combination of solution- or solid-phase lipopeptide synthesis with expressed protein ligation

Prenylated proteins with non-native functionalities are generally very difficult to obtain by recombinant or enzymatic means. The semisynthesis of preparative amounts of prenylated Rab guanosine triphosphatases (GTPases) from recombinant proteins and synthetic prenylated peptides depends largely on the availability of functionalised prenylated peptides corresponding to the proteins' native structure or modifications thereof. Here, we describe and compare solution-phase and solid-phase strategies for the generation of peptides corresponding to the prenylated C terminus of Rab7 GTPase. The solid-phase with utilisation of a hydrazide linker emerges as the more favourable approach. It allows a fast and practical synthesis of pure peptides and gives a high degree of flexibility in their modification. To facilitate the analysis of semisynthetic proteins, the synthesised peptides were equipped with a fluorescent group. Using the described approach, we introduced fluorophores at several different positions of the Rab7 C terminus. The position of the incorporated fluorescent groups in the peptides did not influence the protein-ligation reaction, as the generated peptides could be ligated onto thioester-tagged Rab7. However, it was found that the positioning of the fluorescent group had an influence on the functionality of the Rab7 proteins; analysis of the interaction of the semisynthetic Rab7 proteins with REP (Rab escort protein) and GDI (guanosine diphosphate dissociation inhibitor) molecules revealed that modification of the peptide side chains or of the C-terminal isoprenoid did not significantly interfere with complex formation. However, functionalisation of the C terminus was found to have an adverse effect on complex formation and stability, possibly reflecting low structural flexibility of the Rab GDI/REP molecules in the vicinity of the lipid-binding site.     

Luminol Oxidation by Hydrogen Peroxide Catalyzed by Tobacco Anionic Peroxidase: Steady-State Luminescent and Transient Kinetic Studies

The properties of a newly isolated anionic tobacco peroxidase from transgenic tobacco plants overexpressing the enzyme have been studied with respect to the chemiluminescent reaction of luminol oxidation. These were compared to the properties of horseradish peroxidase in the cooxidation of luminol and p -iodophenol, the enhanced chemiluminescence reaction. The pH, luminol and hydrogen peroxide concentrations were optimized for maximum sensitivity using the tobacco enzyme. The detection limit for the latter under the optimal conditions (2.5 m M luminol, 2 m M hydrogen peroxide, 100 m M Naborate buffer, pH 9.3) was about 0.1 p M , which is at least five times lower than that for horseradish peroxidase in enhanced chemiluminescence with p -iodophenol. The rate constants for the elementary steps of the enzyme-catalyzed reaction have been determined: k ₁= 4.9 × 10⁶ M ⁻¹ s¹, k ₂= 7.3 × 10⁶ M ⁻¹ s⁻¹, k ³= 2.1 × 10⁶ M ⁻¹ s⁻¹ (pH 9.3). The similarity of these rate constants is unusual for plant peroxidases. The high catalytic activity of tobacco peroxidase in the luminescent reaction is explained by the high reactivity of its Compound II toward luminol and the high stability of the holoenzyme with respect to heme dissociation. This seems to be a unique property of this particular enzyme among other plant peroxidases.