A comparative electrochemical study of diffusion in room temperature ionic liquid solvents versus acetonitrile.

Measurements on the diffusion coefficient of the neutral molecule N,N,N',N'-tetramethyl-para-phenylenediamine and the radical cation and dication generated by its one- and two-electron oxidation, respectively, are reported over the range 298-348 K in both acetonitrile and four room temperature ionic liquids (RTILs). Data were collected using single and double potential step chronoamperometry at a gold disk electrode of micrometer dimension, and analysed via fitting to the appropriate analytical expression or, where necessary, to simulation. The variation of diffusion coefficient with temperature was found to occur in an Arrhenius-type manner for all combinations of solute and solvent. For a given ionic liquid, the diffusional activation energies of each species were not only closely equivalent to each other, but also to the RTIL's activation energy of viscous flow. In acetonitrile supported with 0.1 M tetrabutylammonium perchlorate, the ratio in diffusion coefficients of the radical cation and dication to the neutral molecule were calculated as 0.89 +/- 0.05 and 0.51 +/- 0.03, respectively. In contrast, amongst the ionic liquids the same ratios were determined to be on average 0.53 +/- 0.04 and 0.33 +/- 0.03. The consequences of this dissimilarity are considered in terms of the modelling of voltammetric data gathered within ionic liquid solvents.     

Crystalline polymorph selection and discovery with polymer heteronuclei

The discovery and selective production of crystalline polymorphs, an outstanding problem in solid-state chemistry, is of great importance industrially in, for example, the manufacture of pharmaceuticals and pigments. Despite considerable efforts, no reliable method exists to produce all of the stable polymorphs of a given compound. Herein, we report methodology to control the phenomenon of crystal polymorphism through the use of diverse libraries of polymer heteronuclei including both commercially available polymers and combinatorially synthesized cross-linked polymers. This new approach for exploring polymorph space offers the advantage of high throughput crystallization to discover multiple polymorphs combined with the ability to selectively produce a given form from a single solvent and temperature condition by simply varying the nature of the polymer substrate. This technique is successfully demonstrated on the pharmaceuticals acetaminophen, sulfamethoxazole, and carbamazepine and on the pharmaceutical intermediate 5-methyl-2-[(2-nitrophenyl)amino]-3-thiophenecarbonitrile (ROY). High throughput screening, accomplished by optical microscopy and Raman spectroscopy, identified the selective production of the two stable polymorphs of acetaminophen and all six stable forms of ROY. Furthermore, one new form of carbamazepine and two new forms of sulfamethoxazole were discovered; in these cases, single crystals were obtained enabling the structural characterization of two new tetramorphic systems.     

An alternative sampling algorithm for use in liquid chromatography/tandem mass spectrometry experiments

In liquid chromatography/tandem mass spectrometry (LC/MS/MS) analyses of complex peptide mixtures, dynamic exclusion functions are used to minimize repeat selections of identical precursors for collision induced dissociation (CID). We describe a new algorithm for the dynamic exclusion of m/z values during LC/MS/MS. Full-scan based peak exclusion (Fulspec) uses a simplified model of chromatographic peak formation to detect and exclude contaminants present throughout the run or that lead to broad peaks. Therefore, instead of excluding peptides from fragment analysis according to a rigidly predefined time window, the chromatographic properties of the detected analytes are used. The algorithm was tested on two datasets derived from previously published experiments. Fulspec achieves a distribution of CID spectra with minimal tailing on the retention time axis, without resorting to rigid exclusion of m/z values. The procedure further excludes intensities with a bias towards low-quality CID spectra. This combination frees up valuable analytical capacity. The underlying intensity vs. quality analyses challenge the assumption that abundant precursors automatically give the best identifications. Further validation of the algorithm will require its incorporation by equipment manufacturers into the instrument control programs.     

Probing charge-transfer processes in helium nanodroplets by optically selected mass spectrometry (OSMS): charge steering by long-range interactions

Electron impact ionization of a helium atom in a helium nanodroplet is followed by rapid charge migration, which can ultimately result in the localization of the charge on an atomic or molecular solute. This process is studied here for the cases of hydrogen cyanide, acetylene, and cyanoacetylene in helium, using a new experimental method we call optically selected mass spectrometry (OSMS). The method combines infrared laser spectroscopy with mass spectrometry to separate the contributions to the overall droplet beam mass spectrum from the various species present under a given set of conditions. This is done by vibrationally exciting a specific species that exists in a subset of the droplets (for example, the droplets containing a single HCN molecule). The resulting helium evaporation leads to a concomitant reduction in the ionization cross sections for these droplets. This method is used to study the charge migration in helium and reveals that the probability of charge transfer to a solvated molecule does not approach unity for small droplets and depends on the identity of the solvated molecule. The experimental results are explained quantitatively by considering the effect of the electrostatic potential (between the charge and the embedded molecule) on the trajectory of the migrating charge.     

Surface chemistry studies of (CdSe)ZnS quantum dots at the air-water interface

Trioctylphosphine oxide- (TOPO-) capped (CdSe)ZnS quantum dots (QDs) were prepared through a stepwise synthesis. The surface chemistry behavior of the QDs at the air-water interface was carefully examined by various physical measurements. The surface pressure-area isotherm of the Langmuir film of the QDs gave an average diameter of 4.4 nm, which matched very well with the value determined by transmission electron microscopy (TEM) measurements if the thickness of the TOPO cap was counted. The stability of the Langmuir film of the QDs was tested by two different methods, compression/decompression cycling and kinetic measurements, both of which indicated that TOPO-capped (CdSe)ZnS QDs can form stable Langmuir films at the air-water interface. Epifluorescence microscopy revealed the two-dimensional aggregation of the QDs in Langmuir films during the early stage of the compression process. However, at high surface pressures, the Langmuir film of QDs was more homogeneous and was capable of being deposited on a hydrophobic quartz slide by the Langmuir-Blodgett (LB) film technique. Photoluminescence (PL) spectroscopy was utilized to characterize the LB films. The PL intensity of the LB film of QDs at the first emission maximum was found to increase linearly with increasing number of layers deposited onto the hydrophobic quartz slide, which implied a homogeneous deposition of the Langmuir film of QDs at surface pressures greater than 20 mN.m(-1).     

Analysis of polyaddition levels in i-Sc3NC80

Using the density functional method, the stabilities of highly hydrogenated and fluorinated [80]fullerenes, both empty and containing the Sc3N molecule, have been calculated. Addition of 44 atoms to i-Sc3NC80 is predicted to be most favorable due to the formation of six octahedrally located benzenoid rings, while addition of up to 52 atoms (consistent with preliminary fluorination data) gives a structure stabilized by the presence of four benzenoid rings. The most stable isomers at this addition level have been determined and the relative stabilities of a number of C80H52, C80F52, and i-Sc3NC80H52 species calculated. The hydrogenation of the i-Sc3NC80 has been computed to be more difficult than the corresponding partner, C80. From the geometrical point of view, the Sc3N molecule is planar in the parent [80]fullerene but is calculated to be pyramidal in some of the hydrogenated/fluorinated derivatives. Moreover, in these it has fixed locations due to orbital interactions arising from deformation of the cage and the presence of localized double bonds.     

Baylis-Hillman mechanism: a new interpretation in aprotic solvents

Using reaction rate data collected in aprotic solvents, we have determined that the Baylis-Hillman rate-determining step is second order in aldehyde and first order in DABCO and acrylate. On the basis of these data, we have proposed a new mechanism involving a hemiacetal intermediate. The proposed mechanism was then supported using two different kinetic isotope experiments.     

1,25-Dihydroxyvitamin D3 and analogues protect primary human keratinocytes against UVB-induced DNA damage

Exposure to UVB irradiation is a major risk factor for the development of skin cancer. Therefore, it is important to identify agents that can offer protection against UVB-caused damage. Photocarcinogenesis is caused largely by mutations at sites of incorrectly repaired DNA photoproducts, of which the most common are the cyclobutane pyrimidine dimers (CPDs). In this study, we demonstrated that 1,25-dihydroxyvitamin D3 [1,25(OH)2D3] protects primary human keratinocytes against the induction of CPDs by UVB. This protection required pharmacologic doses 1,25(OH)2D3 and an incubation period of at least 8 h before irradiation. Furthermore, we provided arguments indicating that the anti-proliferative capacity of 1,25(OH)2D3 underlies its protective effect against UVB-induced DNA damage. Finally, we showed that 19-nor-14-epi-23-yne-1,25(OH)2D3 (TX 522) and 19-nor-14,20-bisepi-23-yne-1,25(OH)2D3 (TX 527), two low-calcemic analogues of 1,25(OH)2D3, were even 100 times more potent than the parent molecule in inhibiting UVB-caused DNA damage. These molecules are therefore promising candidates for the chemoprevention of UVB-induced skin cancer.     

Determination of total chromium in phosphate rocks by ion chromatography

Chromium(VI) is one of seven elements which is classified in the fertilizer industry as being harmful to plants and biological systems. Phosphate rocks represent the raw material for complex fertilizer production in the world. This paper investigates for the first time the determination of total chromium in phosphate rocks by ion chromatography. The developed analytical method involves the digestion of phosphate rocks with nitric acid followed by sample treatment of the resulting solution. The digestion solution obtained was treated with an oxidising agent (potassium peroxosulphate) to convert all chromium to the hexavalent state. The analytical method developed utilizes anion-exchange ion chromatography to achieve the separation and spectrophotometric post-column reaction for detection with diphenylcarbazide. The relative standard of deviation from analytical data comparison of six different phosphate rocks with atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry techniques, and cross-analysis data against an internationally certified phosphate rock standard were between 0.58 and 1.45%. Calibration curve between 0.2 and 0.9 μg/ml was excellent, and the method has a detection limit for Cr(VI) of 0.05 ng. The developed method offers a fast, a reliable and an alternative procedure for the determination of total chromium in phosphate rock deposits by ion chromatography.