Improved procedure for the synthesis of thiazolium-type peptide coupling reagents: BMTB as a new efficient reagent

An efficient scalable synthesis of 2-halothiazolium-type peptide coupling reagents has been developed. The key step is the formation of the 2-bromothiazole scaffold through cyclization of α-thiocyanato ketones with hydrogen bromide. Using this method, the new coupling reagent 2-bromo-N-methylthiazolium bromide (BMTB) was synthesized. BMTB was tested in a difficult model coupling reaction of two sterically hindered N-methylated amino acids and showed higher activity than the well-established peptide coupling reagent HATU.     

(–)‐2‐(1,2,3,4,4a,5,6,7,8,8aα‐Decahydro‐4aβ,8α‐dimethyl‐7‐oxo‐2β‐naphthyl)propionic acid: catemeric hydrogen bonding in a bicyclic sesquiterpenoid ζ‐keto acid

In the title compound, C₁₅H₂₄O₃, derived from a naturally occurring sesquiterpenoid, the asymmetric unit consists of two mol­ecules differing by 167.4 (8)° in the rotational conformation of the carboxyl group. Each molecule aggregates separately with its own type as carboxyl‐to‐ketone hydrogen‐bonding catemers [O⋯O = 2.715 (6) and 2.772 (6) Å, and O—H⋯O = 169 and 168°]. This generates two crystallographically independent single‐strand hydrogen‐bonding helices passing through the cell in the b direction, with opposite end‐to‐end orientations. One intermolecular C—H⋯O=C close contact exists for the carboxyl group of one of the mol­ecules. The structure is isostructural with that of a closely related unsaturated keto acid reported previously.     

Peptide-coated CdS quantum dots for the optical detection of copper(II) and silver(I)

Gly-His-Leu-Leu-Cys coated CdS quantum dots detected Cu2+ and Ag+ selectively with high sensitivity, below 0.5 microM.     

Copper(II)-catalysed aerobic oxidation of primary alcohols to aldehydes

[CuBr2(2,2'-bipyridine)] catalyses the selective and very mild aerobic oxidation of primary alcohols to aldehydes in acetonitrile:water (2:1) in the presence of 2,2,6,6-tetramethylpiperidinyl-1-oxy (TEMPO) and a base as cocatalysts.     

A Layer‐by‐Layer Film of Chitosan in a Taste Sensor Application

Chitosan is alternated with sulfonated polystyrene (PSS) to build layer‐by‐layer (LBL) films that are used as sensing units in an electronic tongue. Using impedance spectroscopy as the principle method of detection, an array using chitosan/PSS LBL film and a bare gold electrode as the sensing units was capable of distinguishing the basic tastes – salty, sweet, bitter, and sour – to a concentration below the human threshold. The suitability of chitosan as a sensing material was confirmed by using this sensor to distinguish red wines according to their vintage, vineyard, and brands.

PCA Plot for red wine samples obtained from impedance measurements at 1 kHz for the sensor array comprising a 3‐bilayer chitosan/PSS film and a bare gold electrode.     

Toward novel DNA binding metal complexes: structure and basic kinetic data of [M(9MeG)2(CH3OH)(CO)3]+(M = 99Tc,Re)

To study the interaction of the fac-[M(CO)(3)](+) moiety (M = (99m)Tc, (188)Re) with DNA bases, we reacted [M(OH(2))(3)(CO)(3)](+) with 9-methylguanine (9-MeG), guanosine (G), and 2-deoxyguanosine (2dG). Two bases bind to the metal center via the N7 atoms. X-ray structure analysis of [(99)Tc(CH(3)OH)(9-MeG)(2)(CO)(3)](+) (4) (monoclinic, I2/a, a = 28.7533(14) A, b = 8.0631(4) A, c = 32.3600(15) A, beta = 91.543(6) degrees, V = 7499.6(6) A(3), Z = 8) and [Re(OH(2))(9-MeG)(2)(CO)(3)](+) (7) (monoclinic, P2(1)/n, a = 12.2873(11) A, b = 16.0707(13) A, c = 14.1809(16) A, beta = 103.361(12) degrees, V = 2724.4(5) A(3), Z = 4) reveals that the two bases are in a head-to-tail (HT) orientation. Kinetic studies show that the rates of substitution of the purine bases are comparable to that of one of the active forms of cisplatin. The bis-substituted complexes are generally less stable than the platinum adducts, and metalation of the bases is reversible.     

Aqueous synthesis of derivatized cyclopentadienyl complexes of technetium and rhenium directed toward radiopharmaceutical application

Half-sandwich complexes of the type [(RCOCp)M(CO)(3)] with M = Re and (99(m))Tc were synthesized from [M(OH(2))(3)(CO)(3)](+) in water. The R group can be an organic residue or a receptor binding biomolecule with a spacer to cyclopentadienyl (Cp). This provides a general route to Cp complexes of technetium without the need for starting from [TcBr(CO)(5)]. The X-ray structure of [(C(6)H(5)CH(2)COC(5)H(4))Tc(CO)(3)] has been elucidated. The compound crystallizes in the monoclinic space group P2(1)/c with a = 16.1454(9), b = 7.6300(6), and c = 12.3922(7) A and beta = 107.792(6) degrees. We have chosen a serotonergic receptor ligand (WAY) as an example for the derivatization of Cp with a bioactive molecule. WAY is linked to Cp by an aliphatic chain of variable length. The half-sandwich complexes were prepared from water and organic solvents. The structure of [(WAY4-Cp)Re(CO)(3)] could be elucidated. The compound crystallizes in the monoclinic space group P2(1)/c with a = 15.7112(6), b = 6.8775(3), and c = 25.5217(12) A and beta = 103.778(5) degrees. Quantification of inhibition constants gave a clear structure-activity relationship. A single methylene group between the receptor binding site and the half-sandwich complex gave an IC(50) of 217 nM for HT(1A), whereas a butylene linker resulted in retention of the inhibition constant with an IC(50) of 6 nM with respect to underivatized WAY. For use as radiopharmaceuticals, the compounds have also been prepared with (99m)Tc in quantitative yield.     

Alkyl- and aryl-substituted corroles. 4. Solvent effects on the electrochemical and spectral properties of cobalt corroles

Solvent effects on the electrochemistry and spectroscopic properties of alkyl- and aryl-substituted corroles in nonaqueous media are reported. The oxidation and reduction of six compounds containing zero to seven phenyl or substituted phenyl groups on the macrocycle were studied in four different nonaqueous solvents (CH(2)Cl(2), PhCN, THF, and pyridine) containing 0.1 M tetra-n-butylammonium perchlorate. Dimers were formed upon oxidation of all corroles in CH(2)Cl(2), but this was not the case in the other three solvents, where either monomers or dimers were formed upon oxidation depending upon the solvent Gutmann donor number and the number or location of aryl substituents on the macrocycle. The half-wave potentials were analyzed as a function of the number of aryl substituents on the macrocycle as well as the concentration of added pyridine to PhCN solutions of the compound, and these data were combined with data from the spectroelectrochemistry experiments to determine the stoichiometry of the species actually in solution after the first oxidation or first reduction of each compound. The results of these experiments indicate that reduction of the bispyridine adduct (Cor)Co(III)(py)(2) proceeds via the monopyridine complex (Cor)Co(III)(py) to give in each case the unligated cobalt(II) corrole [(Cor)Co(II)](-). In contrast, pyridine remains coordinated after electrooxidation, and the final product was characterized as [(Cor)Co(III)(py)(2)](+).     

Determination of ochratoxin A in currants, raisins, sultanas, mixed dried fruit, and dried figs by immunoaffinity column cleanup with liquid chromatography: interlaboratory study

An interlaboratory study was performed on behalf of the Food Standards Agency to evaluate the effectiveness of an affinity column cleanup liquid chromatographic (LC) method for the determination of ochratoxin A in a variety of dried fruit at European regulatory limits. To ensure homogeneity before analysis, laboratory samples are normally slurried with water in the ratio of 5 parts fruit to 4 parts water, and test materials in this form were used in the study. The test portion was extracted with acidified methanol. The extract was filtered, diluted with phosphate-buffered saline, and applied to an affinity column. The column was washed and ochratoxin A was eluted with methanol. Ochratoxin A was quantified by reversed-phase LC. The use of post-column pH shift to enhance the fluorescence of ochratoxin A by the addition of 1.1 M ammonia solution to the column eluant is optional. Determination was by fluorescence. Currants, sultanas, raisins, figs, and mixed fruit (comprising dried pineapple, papaya, sultanas, prunes, dates, and banana chips), both naturally contaminated and blank (very low level), were sent to 24 collaborators in 7 European countries. Participants were asked to spike test portions of all test samples at a level equivalent to 5 ng/g ochratoxin A. Average recoveries ranged from 69 to 74%. Based on results for 5 naturally contaminated test samples (blind duplicates) the relative standard deviation for repeatability (RSDr) ranged from 4.9 to 8.7%, and the relative standard deviation for reproducibility (RSDR) ranged from 14 to 28%. The method showed acceptable within- and between-laboratory precision for all 5 matrixes, as evidenced by HORRAT values <1.3.     

Under pressure: predicting pressurized metered dose inhaler interactions using the atomic force microscope

Drug particulate interactions in pressurized metered dose inhalers (pMDI) may lead to a decrease in aerosolization efficiency and subsequent efficacy in patient treatment. The interactions between salbutamol sulfate (commonly used in Ventolin pMDIs) and a series of pMDI canister materials were investigated using the atomic force microscope (AFM) colloid probe technique. Approximately 4000 individual force-distance curves were determined for a drug probe and three surfaces (10 x 10 mum areas) in situ, in a model propellant. The area under each force-distance curve was integrated to obtain separation energy values. Median separation energy values followed the rank order borosilicate glass > aluminum > PTFE, suggesting PTFE to be the most suitable canister coating.