The transfer between instruments of a reflectance near-infrared assay for paracetamol in intact tablets

This study compares several correction methods to facilitate the transfer of a validated near-infrared (NIR) assay for paracetamol in intact tablets between two reflectance NIR instruments of the same type. Transfer was defined as the ability to accurately predict the true assay value of a sample measured on a NIR system using an assay developed on a different system, and was assessed using a comprehensive set of statistical tests. Direct electronic transfer of the calibration models, representing the NIR assay, was not possible as a result of a definite residual spectrum between instruments. The use of a correction method based on the standardisation of the material used to record the reference spectrum also proved ineffective. Two methods investigated did succeed, the first employed a response surface calculated between the reflectance values of a set of six certified photometric standards measured on both instruments, with all full range partial least square (PLS) regression models subsequently transferred. The next was correction of the spectra from the second instrument utilising the residual spectrum between the mean sample of the validation set measured on both instruments. Through this approach all PLS regression models and also a single multiple linear regression (MLR) model were transferred. As an outcome of this study guidelines are suggested for the transfer of NIR assays along with the criteria deemed necessary to conclusively prove transfer and justify any correction method utilised. The significant criteria were determined to be the paired t-test with both the UV reference assay data and the original NIR assay data, and comparison of the coefficient of multiple determinations.     

Novel resorcinarene-based pH-triggered gelator

Iminodiacetate resorc[4]arene is shown to produce gels that are pH-reversible. The gels formed are clear and stable to inversion. (The gels are not stable above a certain temperature, which varies with concentration.) When the pH of an iminodiacetate resorc[4]arene solution (concentration > 7.6 mM) is lowered to below 2.5, which is near one of the Ka values of the molecule, the dissolved molecules aggregate and cause gelation of water. 1H NMR showed that at the pH of gelation a change occurs in the chemical environment of the iminodiacetate group. Scanning electron microscopy showed that the gel is composed of long strands that interweave and create a molecular mesh.     

Use of cyclic differential scanning calorimetry

Formation of an activated cellulose (Cellulose) species $$CELLULOSE\xrightarrow[{air}]{{heat}}CELLULOSE*$$ is the designated first stage of cellulose degradation in air [1]. Little is known about either the process or the nature of CELLULOSE^*. The transition, designatedT ₂, is observed as an exotherm around 300°C as the sample temperature is raised. No corresponding endotherm is observed on cooling. The process is therefore not reversible but is repeatable as subsequent reheating results in the exotherm being observed again. The exotherm is also found to be oxygen dependant. The effect of all the flame retardant treatments studied was to reduceT ₂ compared to the value for the untreated cotton.     

Quantitative polymerase chain reaction using capillary electrophoresis with laser-induced fluorescence detection: Analysis of duck hepatitis B

We report an accurate and reproducible DNA quantitation method using the polymerase chain reaction (PCR). The amount of PCR product is monitored after each PCR cycle by capillary electrophoresis. To ensure accurate quantitation, a non-amplified internal standard is added to each PCR-amplified electrophoresis sample to correct for variations in injection volume. Quantitation of the sample is based on the number of cycles necessary to generate a predetermined amount of PCR product. Duck hepatitis B virus genome was used as a model in this study. The genome was quantified with a linear relationship between cycle number and logarithm of sample DNA for amounts of sample DNA between 30 and 3.1 x 10(8) copies ( r(2)>0.999). The relative standard deviation for the corrected capillary electrophoresis signal was 2.7%, while the relative standard deviation for the overall assay was 3.0%. Results from a single-blind study generated a relative error of 1.3%.     

Epitope affinity chromatography and biophysical studies of monoclonal antibodies and recombinant antibody fragments

Peptide epitope affinity chromatography is a powerful technique for the purification of antibodies. This study aims to demonstrate the versatility of the technique and to show how biophysical techniques such as circular dichroism (CD) and fluorescence quenching (FQ) can aid the rational design of affinity ligands and characterization of antibody-based reagents. The performance of a number of peptide ligands for the purification of a range of different antibodies and recombinant fragments is investigated by automated fast-protein liquid chromatography. Purified products are analyzed for purity by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. They are then radiolabelled and the immunoreactivity is determined. Ligands are analyzed for secondary structural characteristics by CD and for binding affinity by FQ. Finally, a study is performed to investigate the thermal stability of a recombinant antibody fragment by CD analysis. It is found that simple ligand modifications such as the introduction of a C-terminal cysteine residue can improve purification performance. The FQ studies show that the modified peptide has a higher affinity for antibody. The CD analysis shows that it has a tendency to dimerize because of the formation of disulfide bonds. The versatility of epitope affinity is demonstrated through the purification of a recombinant diabody (dbFv) and by the use of a separate peptide matrix for the purification of an unrelated antibody. All studies result in antibody preparations of high purity and immunoreactivity. The CD analysis of the dbFv shows that it is denatured at 37 degrees C and is therefore unsuitable as a targeting reagent for use in humans in its present form. It is concluded that epitope affinity chromatography coupled with biophysical analyses plays an important role in the production and characterization of antibody-based reagents for targeted diagnosis and therapy of human diseases.     

Nucleation of Organic Crystals—A Molecular Perspective

The outcome of synthetic procedures for crystalline organic materials strongly depends on the first steps along the molecular self‐assembly pathway, a process we know as crystal nucleation. New experimental techniques and computational methodologies have spurred significant interest in understanding the detailed molecular mechanisms by which nuclei form and develop into macroscopic crystals. Although classical nucleation theory (CNT) has served well in describing the kinetics of the processes involved, new proposed nucleation mechanisms are additionally concerned with the evolution of structure and the competing nature of crystallization in polymorphic systems. In this Review, we explore the extent to which CNT and nucleation rate measurements can yield molecular‐scale information on this process and summarize current knowledge relating to molecular self‐assembly in nucleating systems.     

Carbophilic 3‐Component Cascades: Access to Complex Bioactive Cyclopropyl Diindolylmethanes

Naturally occurring indole‐3‐carbinol and 3,3‐diindolylmethane show bioactivity in a number of disparate disease areas, including cancer, prompting substantial synthetic analogue activity. We describe a new approach to highly functionalised derivatives that starts from allene gas and proceeds via the combination of a three‐component Pd⁰‐catalysed cascade with a one‐pot, three‐component carbophilic Pt^II cascade linked to a stereoselective acid‐catalysed Mannich–Michael reaction that generates complex cyclopropyl diindolylmethanes which show selective activity against prostate cancer cell lines.     

A New Class of Remote N‐Heterocyclic Carbenes with Exceptionally Strong σ‐Donor Properties: Introducing Benzo[c]quinolin‐6‐ylidene

We make the case for benzo[c]quinolin‐6‐ylidene ( 1 ) as a strongly electron‐donating carbene ligand. The facile synthesis of 6‐trifluoromethanesulfonylbenzo[c]quinolizinium trifluoromethanesulfonate ( 2 ) gives straightforward access to a useful precursor for oxidative addition to low‐valent metals, to yield the desired carbene complexes. This concept has been achieved in the case of [Mn(benzo[c]quinolin‐6‐ylidene)(CO)₅]⁺ ( 15 ) and [Pd(benzo[c]quinolin‐6‐ylidene)(PPh₃)₂(L)]²⁺ L=THF ( 21 ), OTf ( 22 ) or pyridine ( 23 ). Attempts to coordinate to nickel result in coupling products from two carbene precursor fragments. The CO IR‐stretching‐frequency data for the manganese compound suggests benzo[c]quinolin‐6‐ylidene is at least as strong a donor as any heteroatom‐stabilised carbene ligand reported.     

A novel one-pot method for the preparation of pyrazoles by 1,3-dipolar cycloadditions of diazo compounds generated in situ

A convenient one-pot procedure for the preparation of pyrazoles by 1,3-dipolar cycloaddition of diazo compounds generated in situ has been developed. Diazo compounds derived from aldehydes were reacted with terminal alkynes to furnish regioselectively 3,5-disubstituted pyrazoles. Furthermore, the reaction of N-vinylimidazole and diazo compounds derived from aldehydes gave exclusively 3-substituted pyrazoles in a one-pot process.     

Myoglobin-CO substate structures and dynamics: multidimensional vibrational echoes and molecular dynamics simulations

Spectrally resolved infrared stimulated vibrational echo data were obtained for sperm whale carbonmonoxymyoglobin (MbCO) at 300 K. The measured dephasing dynamics of the CO ligand are in agreement with dephasing dynamics calculated with molecular dynamics (MD) simulations for MbCO with the residue histidine-64 (His64) having its imidazole epsilon nitrogen protonated (N(epsilon)-H). The two conformational substate structures B(epsilon) and R(epsilon) observed in the MD simulations are assigned to the spectroscopic A(1) and A(3) conformational substates of MbCO, respectively, based on the agreement between the experimentally measured and calculated dephasing dynamics for these substates. In the A(1) substate, the N(epsilon)-H proton and N(delta) of His64 are approximately equidistant from the CO ligand, while in the A(3) substate, the N(epsilon)-H of His64 is oriented toward the CO, and the N(delta) is on the surface of the protein. The MD simulations show that dynamics of His64 represent the major source of vibrational dephasing of the CO ligand in the A(3) state on both femtosecond and picosecond time scales. Dephasing in the A(1) state is controlled by His64 on femtosecond time scales, and by the rest of the protein and the water solvent on longer time scales.