Determination of ochratoxin A in currants, raisins, sultanas, mixed dried fruit, and dried figs by immunoaffinity column cleanup with liquid chromatography: interlaboratory study

An interlaboratory study was performed on behalf of the Food Standards Agency to evaluate the effectiveness of an affinity column cleanup liquid chromatographic (LC) method for the determination of ochratoxin A in a variety of dried fruit at European regulatory limits. To ensure homogeneity before analysis, laboratory samples are normally slurried with water in the ratio of 5 parts fruit to 4 parts water, and test materials in this form were used in the study. The test portion was extracted with acidified methanol. The extract was filtered, diluted with phosphate-buffered saline, and applied to an affinity column. The column was washed and ochratoxin A was eluted with methanol. Ochratoxin A was quantified by reversed-phase LC. The use of post-column pH shift to enhance the fluorescence of ochratoxin A by the addition of 1.1 M ammonia solution to the column eluant is optional. Determination was by fluorescence. Currants, sultanas, raisins, figs, and mixed fruit (comprising dried pineapple, papaya, sultanas, prunes, dates, and banana chips), both naturally contaminated and blank (very low level), were sent to 24 collaborators in 7 European countries. Participants were asked to spike test portions of all test samples at a level equivalent to 5 ng/g ochratoxin A. Average recoveries ranged from 69 to 74%. Based on results for 5 naturally contaminated test samples (blind duplicates) the relative standard deviation for repeatability (RSDr) ranged from 4.9 to 8.7%, and the relative standard deviation for reproducibility (RSDR) ranged from 14 to 28%. The method showed acceptable within- and between-laboratory precision for all 5 matrixes, as evidenced by HORRAT values <1.3.     

Thermoconversion of Caryophyllene- to Farnesene-Type Sesquiterpenes. Short access to the enantiomers of (6RS,7RS)- and (6RS,7SR)-6,7-epoxy-6,7-dihydro-β-farnesenes

Flash-vacuum thermolysis of the four diastereoisomeric 5,6-epoxy-5,6-dihydro-caryophyllenes 1–4 at 500–550°/0.1–0.7 Torr leads to the hitherto unreported enantiomers of (6RS,7RS)- and (6RS,7SR)-6,7-epoxy-6,7-dihydro-β-farnesenes ((±)- 5 and (±)- 6 , resp.). In particular, (+)- 5 is formed in 45% yield (ca. 90% ee) and is, thus, an attractive chiral building block for natural-product synthesis.     

New Syntheses of Retinal and Its Acyclic Analog γ‐Retinal by an Extended Aldol Reaction with a C6 Building Block That Incorporates a C5 Unit after Decarboxylation. A Formal Route to Lycopene and β‐Carotene

Since the C₁₅ β‐end‐group aldehyde 10 ((β‐ionylidene)acetaldehyde), an excellent intermediate in the syntheses of retinoids, can be synthesized in many ways from β‐ionone, and since the corresponding acyclic C₁₅ ψ‐end‐group aldehyde 5 can easily be synthesized from citral ( 1 ) (Scheme 3), we applied the C₁₅+C₅ route to the syntheses of γ‐retinal ((all‐E)‐ 8 ) (Scheme 3) and retinal ((all‐E)‐ 13 ) (Scheme 4), and therefore, by coupling (2×C₂₀→C₄₀), to the preparation of lycopene ( 14 ) and β‐carotene ( 15 ) (Scheme 5). Our new syntheses of retinal ((all‐E)‐ 13 ) and γ‐retinal ((all‐E)‐ 8 use an extended aldol reaction with a C₆ building block that incorporates a C₅ unit after decarboxylation.     

Film structures of poly(amido amine) dendrimers with an azacrown core and long alkyl chain spacers on water or Ag nanoparticle suspension

Newly designed poly(amido amine) dendrimers, which have an azacrown core, hexyl spacers, and methyl ester terminals (aza-C6-PAMAM dendrimer), were spread at the air-water and air-silver nanoparticle suspension interfaces, and their film structures were examined by surface pressure-area (pi-A) and surface potential-area (DeltaV-A) isotherms and epifluorescence microscopy. It was revealed that generation (G) 1.5 aza-C6-PAMAM dendrimer on a water subphase formed homogeneous film with face-on configuration, and this configuration was maintained during compression. On the other hand, a G2.5 dendrimer film on the air-water interface took initially homogeneous and face-on configuration that was followed by the conformational change during compression. Using a silver nanoparticle suspension as subphase, G1.5 film was significantly reinforced, and the partial collapse (cracks) in the film appeared as network texture. For a G2.5 dendrimer film, the pi-A and DeltaV-A isotherm properties were similar to that on the water subphase except for the collapsed film; small spots instead of cracks were formed under the film after collapse. These effects of the silver nanoparticle may be due to the formation of a dendrimer/silver nanoparticle composite. The formation process of the nanocomposite film was verified by UV-vis spectroscopy. For the G1.5 dendrimer, silver clusters and nanoparticles adsorbed to the dendrimer film after spreading and formed a small amount of aggregates. During compression, the aggregation proceeded even at low surface pressure. For the G2.5 dendrimer, a dendrimer/nanoparticle composite was also formed after spreading. However, with the initial compression, the absorption bands of clusters, nanoparticles, and aggregate increased together. Upon further compression, while the bands of cluster and nanoparticles decreased, the bands of aggregate still increased. These results suggest that the G2.5 dendrimer covered the cluster and nanoparticles more efficiently than the G1.5 dendrimer did because of the larger molecular size.     

A diatropic ring current in a fluorofullerene trannulene

Ipsocentric current-density maps for a fluorofullerene derivative, C60F15H3, modelling the addition pattern of the experimentally characterised C60F15[CBr(CO2Et)2]3 which contains an [18]trans-annulene system, reveal a diamagnetic ring current dominated by the contribution of the four HOMO electrons, as in a classical (4n + 2) aromatic annulene.     

Action du chlorure de nitrosyle sur le trichloréthylène et sur le tétrachloréthylène

Nitrosyl chloride is only chlorinating in darkness and above 100°. In the sun light and at room temperature it reacts as a chlorinating, nitrosating, nitrating and oxidizing agent. With trichlorethylene in fact pentachlorethane 1,1,1,2-tetrachloro-2-nitrosoethane, 1,1,1,2-tetrachloro-2-nitroethane, dichloracetic acid and a compound of empirical formula C₄H₂Cl₅NO₂ are obtained. Tetrachloroethylene carried to hexachlorethane, pentachloronitrosoethane and tetrachloro-2-(pentachlorethyl)-1,2-oxazetidine. Introduced nitrosyl chloride provided nitrogen monoxide prouved by gaz chromatography. This monoxide reacted afterwards to give nitrogen which is the single nitrogenous gazeous compound. Carbondioxide is a minor component of the gaz.     

Aqueous synthesis of derivatized cyclopentadienyl complexes of technetium and rhenium directed toward radiopharmaceutical application

Half-sandwich complexes of the type [(RCOCp)M(CO)(3)] with M = Re and (99(m))Tc were synthesized from [M(OH(2))(3)(CO)(3)](+) in water. The R group can be an organic residue or a receptor binding biomolecule with a spacer to cyclopentadienyl (Cp). This provides a general route to Cp complexes of technetium without the need for starting from [TcBr(CO)(5)]. The X-ray structure of [(C(6)H(5)CH(2)COC(5)H(4))Tc(CO)(3)] has been elucidated. The compound crystallizes in the monoclinic space group P2(1)/c with a = 16.1454(9), b = 7.6300(6), and c = 12.3922(7) A and beta = 107.792(6) degrees. We have chosen a serotonergic receptor ligand (WAY) as an example for the derivatization of Cp with a bioactive molecule. WAY is linked to Cp by an aliphatic chain of variable length. The half-sandwich complexes were prepared from water and organic solvents. The structure of [(WAY4-Cp)Re(CO)(3)] could be elucidated. The compound crystallizes in the monoclinic space group P2(1)/c with a = 15.7112(6), b = 6.8775(3), and c = 25.5217(12) A and beta = 103.778(5) degrees. Quantification of inhibition constants gave a clear structure-activity relationship. A single methylene group between the receptor binding site and the half-sandwich complex gave an IC(50) of 217 nM for HT(1A), whereas a butylene linker resulted in retention of the inhibition constant with an IC(50) of 6 nM with respect to underivatized WAY. For use as radiopharmaceuticals, the compounds have also been prepared with (99m)Tc in quantitative yield.     

Gear effect—10 : Conformational aspects of the positive or negative buttressing effects of methyl groups: polymethylpyridines

The effect of the shape of a methyl group on reactivity, which cannot be accounted for by considering a methyl group as a spherical substituent with the appropriate van der Waals radius, was considered in kinetics of alkylalion of substituted pyridines and barriers to rotation and ground state conformations of an isopropyl group attached to a planar framework. The perturbation of a methyl group by an o-methyl group is accounted for by a unique conformational explanation which involves the polyhedral shape of the methyl group.     

The gold(III) tetra­chloride salt of L‐cocaine

The title salt, methyl (1R,2R,3S,5S,8S)‐3‐benzoyl­oxy‐8‐methyl‐8‐aza­bicyclo­[3.2.1]octane‐2‐carboxyl­ate tetra­chloro­aurate(III), (C₁₇H₂₂NO₄)[AuCl₄], has its protonated N atom intra­molecularly hydrogen bonded to the O atom of the methoxy­carbonyl group [N⋯O = 2.755 (6) Å and N—H⋯O = 136°]. Two close inter­molecular C—H⋯O contacts exist, as well as five C—H⋯Cl close contacts. The [AuCl₄]⁻ anion was found to be distorted square planar.