Participation of Bao2* in chemiluminescence from low-pressure Ba(g) + O2 flames

New spectioscopic and vibronic population data support the essential correctness of BaO₂^* as the nascent polyatomic emitter and as the precursor to BaO (A ¹Σ⁺ → X¹Σ⁺) and (A' ¹Π → X¹Σ⁺) visible chemiluminescence from metal-rich Ba(g) + O₂ (+ Ar) diffusion flames at 2–350 mTorr- Absolute visible photon yields are reported over this pressure regime.     

Synthetic thermally reversible gel systems. VII

Polymethacrylylglycinamides (PMG), like polyacrylylglycinamides (PAG), form thermally reversible aqueous gels, but higher molecular weights and/or concentrations are required and the melting points of the gels are lower. The heats of crosslinking for aqueous PMG gels fall in the range of ?5 to ?10 kcal/mole of crosslinks, the same as for aqueous PAG gels, implying that the crosslinks are chemically similar. PMG and PAG are incompatible with each other but both are individually compatible with some types of gelatin. The solubilities of PMG and PAG are similar. Various reagents, however, affect PMG and PAG gels in quite different manners. Aqueous PMG solutions, just outside conditions required for gelation, are rheopectic. Intrinsic viscosities [η] of PMG in 2M NaCNS are about 2.5 times those in water. The Huggins' k′ value for PMG in 2M NaCNS has a value of 0.39–0.40, and both it and [η] are essentially temperature-independent over the range 25–45°C. In water at 25°C for PMG, k′ has an average value of about 1.4. With increasing temperature, for H₂O, there is a considerable increase in [η] which is accompanied by a decrease in the value of k′. Osmotic molecular weight measurements on unfractionated PMG in H₂O at 40°C yield π/c versus c plots having essentially zero slope, implying a value of close to zero for the second virial coefficient, a value of about 0.5 for the polymer–solvent interaction parameter, and a condition close to a θ condition. An approximate viscosity–M _n relationship for polydisperse PMG is [η]_{2M NaCNS, 25deg;C} = 1.7 × 10^?8 M _n^1.5. The low value of K and high value of the exponent do not result from large differences in polydispersity but rather from a stiff, rodlike configuration in solution. This steric hindrance to rotation also manifests itself in the extreme brittleness of PMG films and in a ΔH_p for homopolymerization of only ?6 kcal/-mole. The infrared spectra of MG monomer and PMG are recorded as well as the density and refractive index for PMG. PMG has a glass transition at 226°C by DTA and by TGA, thermal decomposition sets in at about 300°C. From copolymerization with acrylic acid, values of 1.66 and +0.06, respectively, were obtained for the resonance factor Q and the electrical factor e for MG monomer.     

Stopped-flow Fourier transform infrared spectroscopy of nitromethane oxidation by the diiron(IV) intermediate of methane monooxygenase

The hydroxylase component (MMOH) of soluble methane monooxygenase from Methylococcus capsulatus (Bath) was reduced to the diiron(II) form and then allowed to react with dioxygen to generate the diiron(IV) intermediate Q in the first phase of a double-mixing stopped-flow experiment. CD3NO2 was then introduced in the second phase of the experiment, which was carried out in D2O at 25 degrees C. The kinetics of the reaction of the substrate with Q were monitored by stopped-flow Fourier transform infrared spectroscopy, observing the disappearance of the asymmetric NO2 bending vibration at 1548 cm-1. The data were fit to a single-exponential function, which yielded a kobs of 0.45 +/- 0.07 s-1. This result is in quantitative agreement with a kobs of 0.39 +/- 0.01 s-1 obtained by observing the disappearance of Q by double-mixing stopped-flow optical spectroscopy at its absorption maximum of 420 nm. These results provide for the first time direct monitoring of the hydroxylation of a methane-derived substrate in the MMOH reaction pathway and demonstrate that Q decay occurs concomitantly with substrate consumption.     

Oxidation of coordinated olefins: the reactions of Cl2 with trichloro(ehtylene)platinate(II)

The oxidation of [PtCl₃(C₂H₄)]- by Cl₂ in aqueous solution, to yield CH₂ClCH₂OH and [PtCl₄]^2-, has been shown to proceed through the following sequence of steps: [PtCl₃(C₂H₄)] Cl₂Cl [PtCl₅(CH₂CH₂Cl)]^2-$\text{H}{}_2\text{O}\text{(HCl)}$ [PtCl₅(CH₂CH₂OH)]^2- → [PtCl₄^2- + CH₂ClCH₂OHEach of the steps and intermediates in this mechanistic sequence has been identified and characterized.     

Synthesis and characterization of new polyamides derived from di(4-cyanophenyl)isosorbide

New optically active polyamides were synthesized according to two ways: using a microwave-assisted polycondensation of an optically active isosorbide-derived diacylchloride with different aromatic diamines in NMP and using interfacial polymerization from an isosorbide-derived diamine with different diacylchlorides. The polymers are obtained with inherent viscosities in the range from 0.11 to 1.05 dL/g. The DSC and TGA measurements clearly demonstrate the high thermal stability of these polymers when considering the range of the melting points from 200 °C to 300 °C and the absence of decomposition till 350 °C.     

Préparation d'isoxazoles trisubstitués par réduction chimique et électrochimique d'α-acyl β-nitrostilbènes

Nitration of α-acylstilbenes with dinitrogen tetroxide leads to corresponding Z-α-acyl-β-nitrostilbenes. By chemical or electochemical reduction of these compounds, trisubstituted isoxazoles were prepared in good yields.     

Préparation de quelques 4-nitroisoxazoles à partir de pseudonitrosites de cétones éthyléniques du type chalcone

The Synthesis of some 4-Nitroisoxazoles from Pseudonitrosites of Chalcones The action of dinitrogen trioxide with α,β-unsaturated ketones of the chalcone type leads to pseudonitrosites (Table 1) which are cyclized to 4-nitro-3,5-diarylisoxazoles (Table 2).     

(Dihydropyridine)iron tricarbonyl complexes

(N-Carboalkoxy-1,2-dihydropyridine)iron tricarbonyl complexes have been isolated by treatment of either N-carboalkoxy-1,2 or -1,4-dihydropyridines with diiron ennecarbonyl. The organic ligand was liberated from these complexes by use of trimethylamine oxide.     

Electron acceptors of the fluorene series. 10.(1) novel acceptors containing butylsulfanyl, butylsulfinyl, and butylsulfonyl substituents: synthesis, cyclic voltammetry, charge-transfer complexation with anthracene in solution, and X-ray crystal structures of two tetrathiafulvalene complexes

2,4,5,7-Tetranitro-9-fluorenone (1b) reacts readily with n-butanethiol in dipolar aprotic solvents with selective substitution of nitro groups by butylsulfanyl groups in positions 2 and 7 (2, 3); the 2,5-isomer 4 was formed only as a minor product (<1%). Condensation of fluorenones 2-4 with malononitrile yielded 9-dicyanomethylene derivatives 5-7, which showed strong intramolecular charge transfer (lambda approximately 510-560 nm) and were found to sensitize the photoconductivity of carbazole-containing polymer films. Oxidation of sulfides 2-4 gave sulfoxide 8 or sulfones 9-11, which then were converted into their corresponding dicyanomethylene derivatives 12-15. All these novel acceptors showed three reversible single-electron reduction waves (cyclic voltammetry) yielding radical anion, dianion, and radical trianion; moreover, acceptors 13-15 showed also a fourth reduction wave, representing reversible tetraanion formation. Substitution of the oxygen of the carbonyl group in the fluorenones by a dicyanomethylene group increased the thermodynamic stability (K(SEM) growth) of the radical anion; K(SEM) ranged from 3 x 10(5) to 3 x 10(9) M(-1). CV measurements characterize compounds 3, 4 (EA = 1. 86-1.89 eV) as poor acceptors, 2, 6-11 (EA = 2.13-2.31 eV) as moderate acceptors, and 5, 12-15 (EA = 2.53-2.66 eV) as strong electron acceptors. Charge-transfer complex (CTC) formation between acceptors 9, 10, 13, 14, and anthracene as a donor was monitored by the appearance of additional low-energy bands in the visible region (CTC bands) of their electron absorption spectra. Increasing the EA of the acceptors from 9-fluorenones to the corresponding 9-dicyanomethylenefluorenes increases the complexation constants K(CTC) by 2.5-3 times, while sulfonyl substituents present substantial steric hindrance for complexation (as compared to the nitro group), decreasing K(CTC) values. Two CTCs for acceptors 14 and 17 with tetrathiafulvalene (TTF) were obtained, and their structures were solved by single-crystal X-ray diffractometry, giving the stoichometries 14:TTF, 2:3, and 17:TTF:PhCl, 1:1:0.5. In the former complex the packing motif is a mixed.DDAD'A. stack; in the latter complex the D and A moieties form unusually close CT pairs, which pack in a herringbone motif.     

A Fujita type global existence-global nonexistence theorem for a weakly coupled system of reaction-diffusion equations

LetDR ^N be a region with smooth boundaryD. Letp·q>1,p, q1. We consider the system:u _t=u+v ^p,v _t=u+u ^q inD×[0, ) withu=v=0 inD×[0, ) andu ₀,v ₀ nonnegative. Let=max(p, q). We show that ifD isR ^N, a cone or the exterior of a bounded domain, then there is a numberpc(D) such that (a) if (+1)/(pq–1)>pc(D) no nontrivial global positive solutions of the system exist while (b) if (+1)/(pq–1)<pc(D) both nontrivial global and nonglobal solutions exist. In caseD is a cone orD=R ^N, (a) holds with equality. An explicit formula forpc(D) is given.This research was supported in part by NSF Grant DMS-8822788 and in part by the Air Force Office of Scientific Research.