Deuteration of Water Enables Self‐Organization of Phospholipid‐Based Reverse Micelles

Phospholipid‐based reverse micelles are composed of branched cylinders. Their branching points are known to attract themselves and to slide along branches. The rate of this sliding is governed by the lifetime of H(D)‐bonded water bridges between phospholipid molecules. This lifetime is increased when the water is deuterated. On condition that the water contains at least 40 D atoms %, water/dipalmitoylphosphatidylcholine (DPPC)/deuterated pyridine reverse micelles with the composition 1.1:1:250 (v/v) have been shown to self‐organize into a liquid crystal in the 310–316 K temperature range. The mechanism of this self‐organization is unraveled by following the FTIR and ¹H NMR spectra of more concentrated micelles upon heating. During the preparation of micelles, pyridine‐(D⁺)H⁺ ions are formed. They give rise to hydron transfers, under the influence of the DPPC electric charges, evidenced by two broad FTIR absorptions above (BB1) and below (BB2) the ν(C? O) stretch. These hydron transfers occur along strong (D⁺)H⁺ bonds of pyridinium ions with pyridine (BB1) and DPPC C?O groups (BB2). The proton transfers at the interface of micelles, relayed in the continuous pyridine medium, create a tenuous link between separated micelles, thus facilitating their organization. Upon heating, DPPC heads shrink and DPPC chains expand to make wedge‐shaped DPPC molecules. The micelles then change in shape: cylinders constrict and enclosed water drifts towards branching points, which swell. Branching points of neighboring micelles come into contact. Due to the deuteration of water these contacts are prolonged and H bonds are formed between DPPC molecules located in each branching point. Upon storage at 39 °C, these branching points fuse. The lateral diffusion of DPPC molecules becomes free, as evidenced by a narrowing of all ¹H NMR resonances. Upon further heating, reorganization into a liquid crystal occurs.     

Quantum readout and fast initialization of nuclear spin qubits with electric currents

Nuclear spin qubits have the longest coherence times in the solid state, but their quantum readout and initialization is a great challenge. We present a theory for the interaction of an electric current with the nuclear spins of donor impurities in semiconductors. The theory yields a sensitivity criterion for quantum detection of nuclear spin states using electrically detected magnetic resonance, as well as an all-electrical method for fast nuclear spin qubit initialization.     

Determination of cobalt marker in cow ruminal fluid by EDXRF and SRTXRF

This article describes a comparison of conventional energy‐dispersive X‐ray fluorescence (EDXRF) and synchrotron radiation total‐reflection X‐ray fluorescence (SRTXRF) for Co determination in ruminal fluid from Holstein cow. This element is used as marker for animal nutrition studies. For EDXRF, 200 µl of the sample were dried on 6.35 µm Mylar film at 60 °C. The excitation was carried out using an X‐ray tube with Mo target and Zr filter operated at 30 kV/20 mA. For SRTXRF, 10 µl of the sample were pipetted on a Lucite carrier and dried at 60 °C. In both the techniques, Ga was used as internal standard and the acquisition time was 200 s. The trueness of both techniques was evaluated through the standard addition method, the recoveries obtained by SRTXRF and EDXRF were 76 and 99%, and the limits of detection, 13 and 240 µg l^?1, respectively. Copyright © 2011 John Wiley & Sons, Ltd.     

Evaluations of the BET, I-point, and α-plot procedures for the routine determination of external specific surface areas of highly dispersed and porous silicas

Nitrogen adsorption isotherms of silicas and other oxidic materials are distorted by the presence of micropore adsorption and capillary condensation. This distortion affects the determination of the specific area of the material, depending on the chosen calculation procedure. Correction of the initial (total) isotherm for micropore capacity decreases or eliminates this source of error to give a useful estimate of the external surface area. In the present work, 26 silica-based adsorbent materials were studied to obtain total and external specific surface areas by the Brunauer-Emmett-Teller (BET), I-point, and α-plot procedures, using the micropore capacities from the α-plots to obtain the corrected (external) isotherms. Errors in the specific surface areas due to the presence of micropores are given by the equation ΔsA = 3.267 (m(2)/cm(3) STP) sV(mic), where sA is the specific surface area in m(2)/g and sV(mic) is the micropore capacity in cm(3) STP/g. A consistent set of conversion factors was obtained by which the external specific surface area obtained using one of these procedures can be converted, with part-per-thousand precision, to either of the others. Although the I-point procedure presents the advantage of not requiring a defined p/p(0) range, the α-plot procedure is recommended for routine determinations of external specific areas of silicas and other oxidic materials, except for cases in which the shapes of the adsorption isotherms of the sample and the reference differ significantly from one another in the p/p(0) range used for the determination.     

Studies on Immobilization and Partial Characterization of Lipases from Wheat Seeds (<Emphasis Type="Italic">Triticum aestivum</Emphasis>)

The objective of this study was to provide some features on immobilization and partial characterization of lipases from wheat seeds. The optimum pH and temperature were found to be 5.5 and 32–37 °C, respectively. The stability of the concentrated enzymatic extract to high temperatures (25, 35, 45, and 55 °C) showed that the incubation of the extract at 55 °C led to its complete inactivation. The concentrated enzymatic extract kept 90% of its hydrolytic and esterification activities until 70 and 40 days of storage at 4 °C, respectively. The extract presented higher hydrolytic specificity to substrates of medium and long chains and higher esterification affinity to fatty acids of short and medium chains and alcohols with two and three carbon atoms. After the immobilization process using activated coal and sodium alginate as supports, an enhancement of about threefold in lipase activity was observed. The development of the present work permitted us to point out some characteristics of lipases from wheat seeds necessary for the proposition of new future industrial applications for this important biocatalyst.     

Flat tori, lattices and bounds for commutative group codes

We show that commutative group spherical codes in R ⁿ , as introduced by D. Slepian, are directly related to flat tori and quotients of lattices. As consequence of this view, we derive new results on the geometry of these codes and an upper bound for their cardinality in terms of minimum distance and the maximum center density of lattices and general spherical packings in the half dimension of the code. This bound is tight in the sense it can be arbitrarily approached in any dimension. Examples of this approach and a comparison of this bound with Union and Rankin bounds for general spherical codes is also presented.     

An investigation of chlorophenol proton affinities and their influence on the biological activity of microorganisms

The proton affinities of 15 chlorophenols are calculated by ab initio methods. Straight correlation between proton affinities and changes in the electronic structure is observed. The proton affinities decrease linearly with the electronic density gain on the chlorine atoms, as the liberation of the proton increases. To confirm the importance of the proton affinities on the toxicity of chlorophenols, calorimetric responses of these molecules and related ones where the acid proton is changed to a methyl group (anisol and its chlorinated derivatives) were used to verify their effects on Chromobacterium violaceum. The results confirmed that the chlorophenols are more toxic than the respective chloroanisols and suggest that high proton affinities are associated with low toxic activity. The toxicity of the chlorophenols can be associated with the respiratory mechanism in some microorganisms.     

Evaluation of the concentration of chemical elements in suspended particulate matter inside a small bronze and iron foundry industry,using a streaker sampler and EDXRF

The aim of this study was to determine and evaluate the temporal profiles of the concentration of chemical elements in the suspended particulate matter present inside a small bronze and an iron foundry industry. To collect the samples, we used a streaker sampler that separates particles with aerodynamic diameters smaller than 10 µm (PM₁₀) in two fractions: fine (particles with aerodynamic diameters less than 2.5 µm; PM_2.5) and coarse (between 2.5 µm and less than 10 µm; PM_10–2.5). The collection of samples was taken every 20 min during a total time of 8 and 5 h of molding and casting of bronze and iron, respectively. The samples collected in the form of strips on a filter (fine fraction) and an impactor (coarse fraction) were analyzed by the energy dispersive X‐ray fluorescence technique. In the excitation, an X‐ray tube with Mo target and Zr filter was used, operated at 30 mA/30 kV. For detecting the characteristic of X‐rays, a semiconductor Si(Li) detector was used, coupled to a multi‐channel spectrometer, with a 300 s excitation/detection time. The results of the temporal profiles of chemical element concentrations in coarse and fine fractions were discussed and compared with the maximum levels set by the Brazilian and international environmental agencies. Copyright © 2013 John Wiley & Sons, Ltd.     

Surfactant effect on electrochemical-induced synthesis of α-Ni(OH)2

Nickel hydroxide films were electrosynthesized in the presence of different diluted surfactant solutions by galvanostatic electroprecipitation. Lamellar α-Ni(OH)₂ films are obtained using cationic surfactant cetyltrimethylammonium bromide (CTAB), anionic surfactant sodium dodecyl sulfate (SDS), and also neutral surfactant Tween® 80. The films were structurally and morphologically characterized by X-ray diffraction, thermal gravimetric analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy, and electrochemically by cyclic voltammetry and electrochemical quartz crystal microbalance (EQCM). The results evidenced that SDS remains intercalated between the lamellae of α-Ni(OH)₂. Albeit the presence of CTAB and Tween® 80, it was noticed in FTIR spectra that the surfactants did not intercalate. The morphology was affected by the presence of different surfactants. All studied surfactants displaced the oxidation potential (E _O) of Ni²⁺/Ni³⁺ process to less positive values. Also, the presence of surfactants improved the electrode charge efficiency and the charge response for the same number of moles of nickel ions deposited. The ratio of the charge and frequency change is 4.4 times bigger for films deposited with SDS when compared with pure α-Ni(OH)₂ films.     

Evaluation of gamma irradiation effect on physico-chemical properties of a mixed beverage based in soy milk and grape juice

The effects of the main operation variables on the electrochemical oxidation of simulated tributyl phosphate (TBP) waste by a boron-doped diamond anode are individually studied. The optimum operating conditions are obtained as follows: 4 g L^?1 initial TBP concentration, 180 min degradation time, 40 mA cm^?2 current density, 0.5 mol L^?1 Na₂SO₄ as the supporting electrolyte, and unadjusted pH of the aqueous phase. Under such conditions, a chemical oxygen demand (COD) removal ratio of 82.3% is achieved, and the energy consumption is 26.16 kWh m^?3. A degradation mechanism of TBP is tentatively proposed.