Investigation of unknown related substances in commercial erythromycin samples with liquid chromatography/mass spectrometry

A selective reversed phase liquid chromatography/mass spectrometry (LC/MS(n)) method is described for the identification of erythromycin impurities and related substances in commercial erythromycin samples. Mass spectral data are acquired on a LCQ ion trap mass spectrometer equipped with an electrospray interface operated in positive ion mode. The LCQ is ideally suited for identification of impurities and related substances because it provides on-line LC/MS(n) capability. Compared with UV detection, this hyphenated LC/MS(n) technique provides as a main advantage efficient identification of novel substances without time-consuming isolation and purification procedures. Using this method four novel related substances were identified in commercial samples.     

Chlorido­bis[(2‐oxoazocan‐1‐yl)methyl]­germanium(IV) trifluoro­methane­sulfonate

In the title compound, [Ge(C₈H₁₄NO)₂Cl]CF₃SO₃, which is the first complex containing an eight‐membered lactam (enantho­lactam) as ligand, the coordination polyhedron of the Ge^IV atom is inter­mediate between trigonal–bipyramidal and square‐pyramidal. Quantum chemical calculations of the crystal structure indicate the absence of additional coordination bonding between the Ge^IV atom and the trifluoro­methane­sulfonate anion.     

Studies Related to Biological Detoxification of Kraft Pulp Mill Effluent. IV.The Biodegradation of 14-Chlorodehydroabietic Acid with Mortierella isabellina

One of the fish-toxic chlorinated resin acids, 14-chlorodehydroabietic acid ( 5 ), found in kraft mill effluent is examined. When exposed to the fungus Mortierella isabellina, 5 is converted into a number of hydroxylated derivatives which show low levels of toxicity to fish. These biotransformation products were isolated and characterized.     

Analysis of colistin sulfate by capillary zone electrophoresis with cyclodextrins as additive

A method for the quantitative analysis of colistin sulfate by capillary zone electrophoresis is described. Since colistin components have five free amino groups, they tend to adsorb onto the capillary wall and cause peak tailing. It was found that triethanolamine (TEA)-phosphate buffer at pH 2.5 was useful to reduce such adsorption. Methyl-beta-cyclodextrin (M-beta-CD) and 2-propanol (IPA) were found necessary for selectivity enhancement. In order to optimize the separation parameters and predict the method robustness, a central composite design was performed including three variables, namely concentration of M-beta-CD, TEA, and IPA. The effects of capillary length and applied voltage on separation were also investigated. The optimal conditions established were: 140 mM TEA-phosphate buffer containing 5 mM M-beta-CD and 6% v/v IPA, a capillary with 55 cm total length (50 microm inner diameter, 47 cm from inlet to detection window) and 24 kV applied voltage. The method was found to be robust when the variables were changed in the following range: 4-6 mM M-beta-CD, 5-7% v/v IPA, and 130-150 mM TEA. Further, the linearity, limit of detection (LOD), and limit of quantitation (LOQ), as well as repeatability for both colistin A and B were examined and three commercial samples were quantitatively analyzed.     

A dimeric constrained‐geometry titanium complex linked by double Ti–CH2–Al–CH2 heterocycles

In the structure of bis({N‐[di­methyl(1η⁵‐2,3,4,6‐tetra­methyl­in­den­yl)­silyl]­cyclo­hexyl­amido‐1κN}(methyl‐3κC)‐di‐μ₃‐methyl­ene‐1:2:3κ³C;1:3:3′κ³C‐tris(pentafluorophenyl‐2κC)titanium) benzene disolvate, [Me₂Si(η⁵‐2,3,4,6‐Me₄C₉H₂)(C₆H₁₁N)]Ti[(μ₃‐CH₂)Al(C₆F₅)₃][AlMe(μ₃‐CH₂)]₂ or [Ti₂(C₂₁H₇AlF₁₅)₂(C₂₁H₃₁NSi)₂]·2C₆D₆, the dimer is located on an inversion center, and the two Ti centers are linked by double Ti(μ₃‐CH₂)Al(C₆F₅)₃AlMe(μ₃‐CH₂) heterocycles. The electron‐deficient Ti centers are further stabilized by two α‐agostic interactions between Ti and one H atom of each bridging methyl­ene group.     

Polymerization of MMA by oscillating zirconocene catalysts, diastereomeric zirconocene mixtures, and diastereospecific metallocene pairs

Characteristics of methyl methacrylate (MMA) polymerization using oscillating zirconocene catalysts, (2-Ph-Ind)₂ZrX₂ (X = Cl, 1; X = Me, 2), mixtures of rac- and meso-zirconocene diastereomers, (SBI)ZrMe₂ [3, SBI = Me₂Si(Ind)₂] and (EBI)ZrMe₂ [4, EBI = C₂H₄(Ind)₂], as well as diastereospecific metallocene pairs, rac-4/Cp₂ZrMe₂ (5) and rac-4/CGCTiMe₂ [6, CGC = Me₂Si(Me₄C₅)(t-BuN)], are reported. MMA polymerization using the chloride catalyst precursor 1 activated with a large excess of the modified methyl aluminoxane is sluggish, uncontrolled, and produces atactic PMMA. On the other hand, the polymerization by a 2/1 ratio of 2/B(C₆F₅)₃ or 2/Ph₃CB(C₆F₅)₄ is controlled and produces syndiotactic PMMA. Mixtures of diastereomeric ansa-zirconocenes 3 or 4 containing various rac/meso ratios, when activated with B(C₆F₅)₃, yield bimodal PMMA; this behavior is attributed to the meso-diastereomer that, in its pure form, affords bimodal, syndio-rich atactic PMMA. For MMA polymerization using diastereospecific metallocene pairs, rac-4/5 and rac-4/6, the isospecific catalyst site dominates the polymerization events under the conditions employed in this study, and the aspecific and syndiospecific sites are largely nonproductive, thereby forming only highly isotactic PMMA.     

Calculation of the viscosity of binary liquids at various temperatures using Jouyban-Acree model

Applicability of the Jouyban-Acree model for calculating absolute viscosity of binary liquid mixtures with respect to temperature and mixture composition is proposed. The correlation ability of the model is evaluated by employing viscosity data of 143 various aqueous and non-aqueous liquid mixtures at various temperatures collected from the literature. The results show that the model is able to correlate the data with an overall percentage deviation (PD) of 1.9+/-2.5%. In order to test the prediction capability of the model, three experimental viscosities from the highest and lowest temperatures along with the viscosities of neat liquids at all temperatures have been employed to train the model, then the viscosity values at other mixture compositions and temperatures were predicted and the overall PD obtained is 2.6+/-4.0%.     

The structures of 5-methyl-5-phenyl-5H-dibenzo[b,f] silepin and its saturated analog

The structures of 5-methyl-5-phenyl-5H-dibenzo[b,f] silepin (I) and 5-methyl- 5-phenyl-1O,11-dihydro-5H-dibenzo [b,f] silepin (II) have been determined from three-dimensional X-ray data collected by counter methods. I crystallizes in the orthorhombic space group Pnam with a 7.596(3), b 18.102(5) and c 12.190(2) Å; observed and calculated densities (Z = 4) are 1.17 and 1.18 g cm^?3, respectively. II crystallizes in the monoclinic space group $\text{P}\text{2}{}_1\text{c}$ with a 11.115(3), b 7.920(3), c 20.765(5) Å and β 111.71(2)°; observed and calculated densities (Z = 4) are 1.17 g cm^?3. Anisotropic refinement of nonhydrogen atoms, with hydrogen atoms included at fixed ideal locations, gave conventional R-factors of 4.5% (I) and 5.0% (II). Compound I exhibits the boat conformation for the tricyclic framework and is located on a crystallographically required mirror plane. Com- pound II has the expected folded boat conformation. The torsion angle about the 10,11-bond is 0.0° for I, a crystallographic symmetry requirement, and 89.9° for II. Mean SiC bond distances are 1.863 Å(I) and 1.875 Å(II). The dihedral angles between the planar benzo groups are 129.7° (I) and 137.2° (II); introduc- tion of unsaturation at the 10,11-position decreases the dihedral angle in the tri- cyclic system, i.e., the tricyclic system is more bent.     

Blue-shifted hydrogen-bonded complexes. II. CH3F(HF)1 n 3 and CH2F2(HF)1 n 3

The equilibrium structures, binding energies, and vibrational spectra of the clusters CH₃F(HF)_{1 n 3} and CH₂F₂(HF)_{1 n 3} have been investigated with the aid of large-scale ab initio calculations performed at the Møller–Plesset second-order level. In all complexes, a strong C–FH–F halogen–hydrogen bond is formed. For the cases n = 2 and n = 3, blue-shifting C–HF–H hydrogen bonds are formed additionally. Blue shifts are, however, encountered for all C–H stretching vibrations of the fluoromethanes in all complexes, whether they take part in a hydrogen bond or not, in particular also for n = 1. For the case n = 3, blue shifts of the ν(C–H) stretching vibrational modes larger than 50 cm⁻¹ are predicted. As with the previously treated case of CHF₃(HF)_{1 n 3} complexes (A. Karpfen, E. S. Kryachko, J. Phys. Chem. A 107 (2003) 9724), the typical blue-shifting properties are to a large degree determined by the presence of a strong C–FH–F halogen–hydrogen bond. Therefore, the term blue-shifted appears more appropriate for this class of complexes. Stretching the C–F bond of a fluoromethane by forming a halogen–hydrogen bond causes a shortening of all C–H bonds. The shortening of the C–H bonds is proportional to the stretching of the C–F bond.