Copper corrosion in buffered and non-buffered synthetic seawater: a comparative study

The electrochemical behaviour of copper in neutral buffered and non-buffered synthetic seawater and in pure chloride solutions has been studied by cyclic voltammetry, weight loss measurements, open circuit potential and scanning electron microscopy (SEM). Values of the repassivation potentials of Cu in non-buffered and buffered synthetic seawater, at 50 mV s^–1, were 0.12 and 0.46 V vs. SCE, respectively. The sharpness, heights and location of the different peaks as well as their charges were shown to be influenced by the composition of the solution, buffering conditions, deoxygenation, polarization potential and time. High chloride concentrations lead to higher oxidation charges. The anodic and the cathodic charges were shown to increase as the chloride concentration increases. The open circuit potential transients of copper in non-deoxygenated, non-buffered synthetic seawater indicate pitting from the beginning of the exposure, while in buffered solutions the pitting appeared only after a quite long exposure period, i.e. after 40 days. Corrosion rates of Cu samples after 3 months of immersion were higher in solutions of pure chloride (0.5 M) than in synthetic seawater. After six months the differences were even more noticeable. SEM images have showed a somewhat higher density of pits on copper samples immersed in the chloride solution (0.5 M), in comparison with those in synthetic seawater.     

Mild one-pot conversion of carboxylic acids to amides or esters with Ph3P/trichloroisocyanuric acid

The reaction of trichloroisocyanuric acid (TCICA) and triphenylphosphine in the presence of a carboxylic acid results in the in situ formation of the corresponding acid chloride under mild conditions. Subsequent addition of amines or alcohols, in the presence of a tertiary amine affords the corresponding amides, or esters, in good to excellent yields. The methodology was applied to the synthesis of a dipeptide.     

Determination of aniline by adsorptive stripping voltammetry using an improved diazotization and coupling procedure application to the evaluation of the light degradation of D&C red no. 33 in the presence of ascorbic acid

A method for the determination of aniline was developed, based on the diazotization and coupling of the aromatic amine to form an azo compound capable of being determined by adsorptive stripping voltammetry. A fast derivatization procedure was developed using 1-naftol as the coupling agent. A detection limit of 0.8 mug/l was obtained for aniline, using an accumulation time of 2 min. The method was applied in the determination of the amount of aniline in the colouring matter D&C Red No. 33, after a liquid-liquid extraction with chloroform, before and after submitting the colouring matter to a process of degradation, using accelerated light conditions in the presence of ascorbic acid.     

Interaction of Tb(III) and hydrolyzed polyacrylamides in solution as a gel and in the solid state

Formation of the HPAM-Tb³ complex in solution was observed in the intensification of Tb(III) fluorescence, viscosity, and light scattering. The interaction is dependent on the degree of hydrolysis of the copolymer and the pH of the solution. As the pH value increases, an intensification of the interaction and formation of a gel is observed. The latter was associated with the appearance of crosslinks in which terbium, or one of its hydrolysis products, works as a binding agent between chains. After drying, the characterization of the residues of the gels was effected by analytical determination (C, H, N, Cl, Tb), fluorescence, and infrared spectrophotometry. The analysis and fluorescence revealed the existence of particles of terbium hydroxide; the infrared spectrophotometry showed the binding of terbium (III) to carboxylate of the copolymer.     

Studies on the encapsulation of diclofenac in small unilamellar liposomes of soya phosphatidylcholine

The encapsulation of acid (AD) and sodium diclofenac (SD) in small unilamellar liposomes (SUV) as well as the interactions of the drug with the bilayer was studied. SUV was prepared by sonication from multilamellar liposomes containing soya phosphatidylcholine and diclofenac at various proportions. The size distribution obtained from dynamic light scattering showed that the incorporation of SD decreases significantly the size of the liposomes suggesting that the drug interacts with the bilayer of the liposomes. This size decrease is related with the phase transition of liposomes to mixed micelar solution. The encapsulation of the hydrophilic dye indocyanine green in the aqueous compartment of liposomes showed that the rate of captured dye decreases with SD concentration suggesting the transition of liposomes to mixed micelles. The (31)P NMR analysis indicates that SD interacts with the phosphate of phosphatidylcholine head groups. A schematic model for interaction of SD with phosphatidylcholine of the liposomes in which the diclofenac anion interacts with the ammonium group of the phospholipid and the dichlorophenyl ring occupies a more internal site of bilayer near phosphate group was proposed.     

A simulation model of a high-capacity methane adsorptive storage system

A two-dimensional model is developed to describe the hydrodynamics, heat transfer and adsorption phenomena associated with the adsorptive storage of natural gas (NG) in cylindrical reservoirs. Intraparticle and film resistances to both heat and mass transfer are neglected. In the momentum equation, Ergun's law is considered locally valid and is extended to two dimensions. These assumptions are fully justified in the paper. Numerical results are presented concerning the pressurization and blowdown of an ultra-lightweight 50 litre cylinder, commercially available for the storage of compressed NG, if it were filled with an activated carbon having a good adsorptive storage capacity. A simple formula is also proposed to predict the filling times for fast charges. The predicted temperature changes in the packed-bed are in good agreement with those reported in the literature for an experimental charge/discharge.     

Some remarks on the homogenization of the dam problem

The homogenization of the dam problem is discussed in the general weak formulation by means of the technique of correctors. In the two special cases of horizontal layers and of the isotropic coefficients with separated variables the problem is solved. However, in general, the unsaturated region is not stable for the homogenization, as a counterexample by Alt shows.