Electroreduction of Aryldiazonium Ion at the Polar and Non-Polar Faces of ZnO: Characterisation of the Grafted Films and Their Influence on Near-Surface Band Bending

ZnO is a strong candidate for transparent electronic devices due to its wide band gap and earth-abundance, yet its practical use is limited by its surface metallicity arising from a surface electron accumulation layer (SEAL). The SEAL forms by hydroxylation of the surface under normal atmospheric conditions, and is present at all crystal faces of ZnO, although with differing hydroxyl structures. Multilayer aryl films grafted from aryldiazonium salts have previously been shown to decrease the downward bending at O-polar ZnO thin films, with Zn−O−C bonds anchoring the aryl films to the substrate. Herein we show that the Zn-polar (0001), O-polar (000 ), and non-polar m-plane (10 0) faces of ZnO single crystals, can also be successfully electrografted with nitrophenyl (NP) films. In all cases, X-ray photoelectron spectroscopy (XPS) measurements reveal that the downward surface band bending decreases after modification. XPS provides strong evidence for Zn−O−C bonding at each face. Electrochemical reduction of NP films on O-polar ZnO single crystals converts the film to a mainly aminophenyl layer, although with negligible further change in band bending. This contrasts with the large upward shifts in band bending caused by X-ray induced reduction.     

Screening and analytical confirmation of sulfonamide residues in milk by capillary electrophoresis-mass spectrometry

A new methodology is proposed to automate the monitoring of sulfonamide residues in milk samples. It combines a screening unit for the total amount of sulfonamide with capillary electrophoresis-mass spectrometry (CE-MS) equipment for processing the samples containing a detectable level of sulfonamide. The screening unit consists of continuous-flow system (CFS) to precipitate the proteins connected on-line to the CE-MS equipment, in which a common characteristic ion of all sulfonamides was monitored with the MS detector by flushing the sample through the capillary. The confirmatory method is based on the purification and preconcentration of sulfonamides in a CFS unit and posterior analysis by CE-MS. The sample treatment unit was also on-line connected to the CE-MS equipment. In order to increase sensitivity, the flow rate of the sheath liquid was diminished from 0.5 to 0.2 microL.min(-1) by increasing the content in water from 0 to 50% and the formic acid from 0.5 to 1.5% in this liquid and by applying an overimposed pressure of 5 mbar during the electrophoretic separation. The method allowed the analysis of 30 samples per hour.     

Simultaneous determination of mercury and arsenic by anodic stripping voltammetry

An electrochemical method for the simultaneous determinations of Hg^II concentration and total As^III and As^V concentration has been developed. The method does not require the additional preliminary step of the chemical reduction of As^V to As^III, or oxidation of As^III to As^V before stripping analysis takes place. Also, the method for the simultaneous determination of Hg^II concentration and As^III concentration is described. Measurements were performed in 0.1 M HCl using a gold-plated graphite electrode as sensor. Detection limits for both methods are below 0.4 ppb. Relative standard deviation did not exceed 15%. The possible interference by other trace metals was investigated. Analyses of natural water and industrial solutions were made using proposed methods and AAS. The t-test demonstrates that there was no significant difference between the results obtained with these methods. Proposed methods decrease the time of analysis because concentrations of the Hg^II and arsenic ions were measured simultaneously. Also, the removal of the additional step of chemical reduction of As^V to As^III or oxidation of As^III to As^V decreases analysis time, and also reduces the chance of contamination due to the use of additional reagents.     

Acetylation and molecular mass effects on barrier and mechanical properties of shortfin squid chitosan membranes

Chitosan samples with different N-deacetylation levels were obtained from β-chitin under heterogeneous alkali conditions. Oxidative depolymerisation was performed to attain low-acetylated chitosan samples with different molecular mass. Water vapour permeability, membrane swelling and tensile mechanical properties were analysed in plasticized self-supporting chitosan membranes. The main purpose was to describe unambigously the effect of the biopolymer molecular mass and acetylation degree on these properties. Commercially available chitosan samples derived from α-chitin were also studied for comparison. The equilibrium degree of swelling in water and the water vapour permeability increase by increasing the molecular mass or the degree of acetylation. Regarding the effect on the mechanical properties, generally harder and tougher membranes were obtained for chitosans with higher molecular mass or lower acetylation degree. These observations are tentatively explained based on the different structural characteristics of the polymer and can lead to a better understanding of the tools necessary to tailor a specific type of chitosan membrane.     

Preparative Droplet Counter-Current Chromatography for the Separation of the New Nor-Seco-Triterpene and Pentacyclic Triterpenoids from Qualea Parviflora

The methanolic extract of the bark of the medicinal plant Qualea parviflora (Vochysiaceae) contains new nor-seco-triterpene and pentacyclic triterpenoids. They were separated in a preparative scale using droplet counter-current chromatography. The optimum solvent used was composed of a mixture of CHCl₃/MeOH/H₂O (43:37:20, v/v) in the descending mode and led to a successful separation of the new compound 28-nor-17, 22-seco-2α, 3β, 19, 22, 23-pentahydroxy-Δ¹²-oleanane, besides the known triterpenoids bellericagenin B, bellericaside B and arjunglucoside I . Identification was performed by ESI-MS, ¹H NMR and ¹³C NMR analyses.     

On the equivalence between the energy and virial routes to the equation of state of hard-sphere fluids

The energy route to the equation of state of hard-sphere fluids is ill defined since the internal energy is just that of an ideal gas, and thus it is independent of density. It is shown that this ambiguity can be avoided by considering a square-shoulder interaction and taking the limit of vanishing shoulder width. The resulting hard-sphere equation of state coincides exactly with the one obtained through the virial route. Therefore, the energy and virial routes to the equation of state of hard-sphere fluids can be considered as equivalent.     

A two-step conversion of alpha,beta-unsaturated ketones to their alpha-carbalkoxy or alpha-carbamoyl derivatives

Several enones are converted into their alpha-iodo derivatives in excellent yields and carbonylated with palladium catalysis in the presence of alcohol or amines to the alpha-carbonyl enones in satisfactory yields.     

Rapid determination of aliphatic amines in water samples by pressure-assisted monolithic octadecylsilica capillary electrochromatography-mass spectrometry

A pressure-assisted capillary chromatography-mass spectrometry method based on the use of a monolithic octadecylsilica (ODS) capillary is proposed for the determination of aliphatic amines. A 25 mM citric acid buffer containing 10% methanol is used as running electrolyte. Separation is achieved by simultaneously applying a capillary electrophoresis (CE) voltage of 13 kV and an overimposed pressure of 8 bar. The use of pressure is required to ensure stable electrospray conditions. Analysis times are reduced by using a capillary column consisting of a 30 cm long monolithic silica capillary column bound with ODS and a fused-silica capillary column also 30 cm long. The proposed method was successfully applied to the determination of low-molecular-weight aliphatic amines in tap and river water. The analysis of real samples requires cleanup and preconcentration, which can be performed automatically by inserting a minicolumn in the replenishment system of the commercial instrument.     

Determination of ambroxol in an automated multi-pumping pulsed flow system.

A new flow methodology exploiting the multi-pumping approach was developed for the spectrophotometric determination of ambroxol hydrochloride in pharmaceutical preparations. The flow manifold was implemented by using, exclusively, multiple solenoid-actuated micro-pumps, which acted simultaneously as sample insertion, solutions propelling and reagents commutation units. Linear calibration plots were obtained over an ambroxol concentration ranging from 10 to 200 mg l(-1) (r.s.d. < 0.5%, n = 15) and a sampling rate of about 60 samples per hour (flow rate = 1.92 ml min(-1), sample volume = 80 microl).     

Adsorption of anionic dyes on chitosan beads. 1. The influence of the chemical structures of dyes and temperature on the adsorption kinetics

In this work, chitosan beads were synthesized in acidic medium and cross-linked in 1% glutaraldehyde solution. The characterization of the materials using TG/DTG, XRD, and BET surface areas showed that the beads did not modify their characteristics after the cross-linking reaction. The cross-linked beads were utilized as adsorbents for the removal of the yellow-, blue-, and red-anionic reactive dyes from aqueous solutions at pH 2.0. Adsorption of the yellow-dye increased from 25 to 50 degrees C. However, adsorption of the blue-dye decreased from 25 to 50 degrees C. Interestingly, the adsorption of the red-dye decreased from 25 to 35 degrees C and increased from 45 to 50 degrees C. The kinetic data were evaluated using an Avrami kinetic model, where the parameter n was related to the determination of changes in the adsorption mechanisms. Adsorption data of the dyes in relation to the contact time, the chemical structures of the dyes, and temperature were presented and were discussed.