A mild and efficient method for halogenation of 3,5-dimethyl pyrazoles by ultrasound irradiation using N-halosuccinimides

The 4-halo-3,5-dimethyl pyrazoles have been synthetisized in good yields in short reaction times in the absence of a catalyst by reaction of 3,5-dimethyl pyrazoles with N-halosuccinimides (NBS, NCS and NIS) under ultrasound irradiation. Finally, the halogenation of pyrazoles with Br₂, ICl and I₂ was showed in similar conditions.     

Ab initio analytical potential energy surface and quasiclassical trajectory study of the O(+)((4)S)+H(2)(X (1)Sigma(g) (+))-->OH(+)(X (3)Sigma(-))+H((2)S) reaction and isotopic variants

An analytical potential energy surface (PES) representation of the O(+)((4)S)+H(2)(X (1)Sigma(g) (+)) system was developed by fitting around 600 CCSD(T)/cc-pVQZ ab initio points. Rate constant calculations for this reaction and its isotopic variants (D(2) and HD) were performed using the quasiclassical trajectory (QCT) method, obtaining a good agreement with experimental data. Calculations conducted to determine the cross section of the title reaction, considering collision energies (E(T)) below 0.3 eV, also led to good accord with experiments. This PES appears to be suitable for kinetics and dynamics studies. Moreover, the QCT results show that, although the hypotheses of a widely used capture model are not satisfied, the resulting expression for the cross section can be applied within a suitable E(T) interval, due to errors cancellation. This could be a general situation regarding the application of this simple model to ion-molecule processes.     

Cross sections of the O+ + H2 --> OH+ + H ion-molecule reaction and isotopic variants (D2, HD): quasiclassical trajectory study and comparison with experiments

A dynamics study [cross section and microscopic mechanism versus collision energy (E(T))] of the reaction O+ + H2 --> OH+ + H, which plays an important role in Earth's ionosphere and interstellar chemistry, was conducted using the quasiclassical trajectory method, employing an analytical potential energy surface (PES) recently derived by our group [R. Martinez et al., J. Chem. Phys. 120, 4705 (2004)]. Experimental excitation functions for the title reaction, as well as its isotopic variants with D2 and HD, were near-quantitatively reproduced in the calculations in the very broad collision energy range explored (E(T) = 0.01-6.0 eV). Intramolecular and intermolecular isotopic effects were also examined, yielding data in good agreement with experimental results. The reaction occurs via two microscopic mechanisms (direct and nondirect abstraction). The results were satisfactorily interpreted based on the reaction probability and the maximum impact parameter dependences with E(T), and considering the influence of the collinear [OHH]+ absolute minimum of the PES on the evolution from reactants to products. The agreement between theory and experiment suggests that the reaction mainly occurs through the lowest energy PES and nonadiabatic processes are not very important in the wide collision energy range analyzed. Hence, the PES used to describe this reaction is suitable for both kinetics and dynamics studies.     

An easy and stereoselective synthesis of N-Boc-dolaproine via the Baylis-Hillman reaction

In this communication we report a stereoselective total synthesis of N-Boc-dolaproine (Dap), an amino acid residue of the antineoplastic pentapeptide Dolastatin 10. Our strategy is based on a Baylis-Hillman reaction between N-Boc-prolinal and methyl acrylate, followed by a diastereoselective double bond hydrogenation and hydrolysis of the ester function.     

Thermodynamics of liquid mixtures containing n-alkanes and strongly polar components: VE and C P E of mixtures with either pyridine or piperidine

Excess molar volumes V _E and excess molar heat capacities C _P ^/E at constant pressure have been obtained, as a function of mole fraction x₁, for several binary liquid mixtures belonging either to series I: pyridine+n-alkane (C_lH_2l+2), with l=7, 10, 14, 16, or series II: piperidine+n-alkane, with l=7, 8, 10, 12, 14. The instruments used were a vibrating-tube densimeter and a Picker flow microcalorimeter, respectively. V ^E of pyridine+n-heptane shows a S-shaped composition dependence with a small negative part in the region rich in pyridine (x₁>0.90). All the other systems show positive V ^E only. The excess volumes increase with increasing chain length l of the n-alkane. The excess molar heat capacities of the mixtures belonging to series II are all negative, except for a small positive part for piperidine+n-heptane in the region rich in piperidine (x₁>0.87). The C _P ^/E at the respective minima, C _P ^/E (x_1,min ), become more negative with increasing l, and the x_1,min values range from about 0.26 (l=7) to 0.39 (l=14). Most interestingly, mixtures of series I exhibit curves of C _P ^/E against x₁ with two minima and one maximum, the so-called W-shape curves.Dedicated to Professor A. Néckel on the occasion of his 65^th birthday. Communicated in part at the XVII^èmes Journées de Calorimétrie, d'Analyse Thermique et de Thermodynamique Chimique, Ferrara, Italy, 27–30 October, 1986.     

NMR Conformational Analysis and Theoretical Calculations for 2‐Aryl‐ 1,3‐dihydroxy‐4,4,5,5‐tetramethylimidazolidines

Conformational studies of 1,3‐dihydroxy‐4,4,5,5‐tetramethyl‐2‐(pyridin‐1‐yl)imidazolidine ( 1a ) and 1,3‐dihydroxy‐4,4,5,5‐tetramethyl‐2‐(pyridin‐3‐yl)imidazolidine ( 1b ), carried out by using 1D ¹H‐ and ¹³C‐NMR and 2D HMQC, HMBC, and NOESY experiments and with the aid of theoretical calculations, indicate that the OH groups are trans to the pyridinyl substituent. Because the two ¹H‐NMR signals of the Me groups are distinguishable and do not change between 290 and 380 K, it is proposed that 1a and 1b have each only one conformation in this temperature range. This behavior was not found with 1,3‐dihydroxy‐4,4,5,5‐tetramethyl‐2‐(pyridin‐2‐yl)imidazolidine ( 1c ) because its Me ¹H‐NMR signals cross over at 300 K. Hence, more than one conformation must be present, beyond those produced by simple inversions. Theoretical calculations including temperature and solvent effects were performed to provide further information on the conformational analysis and to help to assign the NMR data. The combination of NMR measurements and quantum‐chemical calculations is shown to be a very promising strategy for conformational analysis studies in solution.     

Raman spectra and structure of multicomponent oxide planar waveguides prepared by sol-gel

This work was aimed at understanding the structure of SiO₂–MO₂ (M = Ti, Zr, Hf) and SiO₂–HfO₂–MO₂ (M = Ti, Zr) materials, used as mixed oxide glass hosts for Er³⁺ ions in the fabrication of optical planar waveguides by sol-gel processing. This structural study was performed by Waveguide Raman Spectroscopy (WRS), complemented with X-ray diffraction (XRD). The admixture of TiO₂ to HfO₂, SiO₂–HfO₂ and HfO₂–ZrO₂ compositions was found to cause precipitation of nanocrystals of tetragonal HfO₂ or ZrO₂, or the formation of hafnia-titania mixed crystals, depending on the HfO₂/TiO₂ molar ratio.     

Linear free-energy relationships and the density functional theory: an analog of the hammett equation

Density functional theory has been applied to describe electronic substituent effects, especially in the pursuit of linear relationships similar to those observed from physical organic chemistry experiments. In particular, analogues for the Hammett equation parameters (sigma, rho) have been developed. Theoretical calculations were performed on several series of organic molecules in order to validate our model and for comparison with experimental results. The trends obtained by Hammett-like relations predicted by the model were found to be in qualitative agreement with the experimental data. The results obtained in this study suggest the applicability of similar correlation analysis based on theoretical methodologies that do not make use of empirical fits to experimental data can be useful in the study of substituent effects in organic chemistry.     

Mixed micellar systems of octyl β,d-glucopyranoside with a nonionic surfactant and a water-soluble polymer

We have made a comparative study between the micellar regions of the octyl -d-glucoside (OG)–tetraethylene glycol monododecyl ether and the OG–poly(ethylene glycol) 20,000 systems by means of surface tension and viscosimetric measurements. The incorporation of the tetraethylene glycol monododecyl ether nonionic surfactant in the OG micelles decreases the critical micelle concentration, whereas the presence of polymer increases it. The nonionic surfactant mixture exhibits nonideal mixing behaviour. The data fit to Rubinghs treatment with a value of –5.1, which implies a modest attraction between both surfactants. The surfactant–poly(ethylene glycol) 20,000 system does not form mixed micelles. The incorporation of polymer increases the critical micelle concentration of the surfactant. The viscosity for the surfactant–polymer system is higher than that for the pure polymer, demonstrating a surfactant-induced structuring.