Drying of solids with irregular geometry: numerical study and application using a three-dimensional model

This article proposes a numerical solution for the diffusion equation applied to solids with arbitrary geometry using non-orthogonal structured grids for the boundary condition of the first kind. A transient three-dimensional mathematical formulation written in boundary fitted coordinates and numerical formalism to discretize the diffusion equation by using the finite volume method, including numerical analysis of the computational solution are presented. To validate the proposed solution, the results obtained in this work were compared with well-known numerical solution available in literature and good agreement was observed. In order to verify the potential of the proposed numerical solution, it was applied to describe mass transfer inside ceramic roof tiles during drying. For that, it was used experimental data of the drying kinetics at the following temperatures: 55.6; 69.7; 82.7 and 98.6 °C. An optimization technique using experimental dataset has been presented to estimation of transport properties. The obtained statistical indicators enable to conclude that the numerical solution satisfactorily describes the drying processes.     

Niobium oxide solid catalyst: esterification of fatty acids and modeling for biodiesel production

Biodiesel can be obtained from fatty acid raw materials through esterification. The reactivity of lauric, palmitic, stearic, oleic, and linoleic fatty acids with methanol using powdered niobic acid as a heterogeneous catalyst was investigated in this work, both experimentally (in a batch reactor) and theoretically. A 2³ experimental design was used, with methanol/fatty acid molar ratio, catalyst concentration, and temperature as main factors. An empirical model demonstrated that temperature is the most important variable. Fourteen heterogeneous and 56 homogeneous‐like kinetic models were tested. A homogeneous‐like model considering zero order for all species and inhibition by water was the most adequate for experiments without catalyst. A homogeneous‐like model considering a second‐order reaction in relation to the fatty acid and no water inhibition was the most adequate for niobic acid catalyzed reaction. Molecular modeling confirmed the experimental results showing that the reactivity is directly related to the increase of unsaturated bonds and the reduction of carbon chain length. The polarity of the fatty acid is determinant in the reactivity. At the molecular level, reaction occurs between the HOMO orbital of methanol and LUMO orbitals of fatty acids and reactivity is higher when the energy difference between these orbitals is lower. Copyright © 2010 John Wiley & Sons, Ltd.     

Characterisation of foxing stains in eighteenth to nineteenth century drawings using non-destructive techniques

The reddish-brown, brown or yellowish stains of circular or irregular shape known as foxing spots have been fully described in conservation literature but still, this phenomenon does not find any scientific agreement since many hypotheses have been raised concerning their origin. In this work a contribution to foxing definition not only focussed on its appearance but also reported on its chemical information. For this purpose foxing stains present in drawings from two Portuguese artists dated from the eighteenth to nineteenth centuries were observed under ultra-violet light and optical microscope and analysed by three non-invasive spectroscopy techniques. The observations carried out on the stains provided information on their surface morphology. The use of energy-dispersive X-ray fluorescence revealed a variation on the elemental content between foxing and paper region. Although the results from X-ray diffraction analysis showed no signs of cellulose degradation in foxing stains, Fourier-transformed infrared analysis revealed the presence of oxide groups. Both the information on the chemical nature and surface morphology of the stains achieved in this study will contribute to increase foxing formation information and develop future protocols for conservation purposes.     

Cleft extensions of a family of braided Hopf algebras

We introduce a family of braided Hopf algebras that (in characteristic zero) generalizes the rank 1 Hopf algebras introduced by Krop and Radford and we study its cleft extensions.     

High-performance hydrogen production and oxidation electrodes with hydrogenase supported on metallic single-wall carbon nanotube networks

We studied the electrocatalytic activity of an [FeFe]-hydrogenase from Clostridium acetobutylicum (CaH2ase) immobilized on single-wall carbon nanotube (SWNT) networks. SWNT networks were prepared on carbon cloth by ultrasonic spraying of suspensions with predetermined ratios of metallic and semiconducting nanotubes. Current densities for both proton reduction and hydrogen oxidation electrocatalytic activities were at least 1 order of magnitude higher when hydrogenase was immobilized onto SWNT networks with high metallic tube (m-SWNT) content in comparison to hydrogenase supported on networks with low metallic tube content or when SWNTs were absent. We conclude that the increase in electrocatalytic activities in the presence of SWNTs was mainly due to the m-SWNT fraction and can be attributed to (i) substantial increases in the active electrode surface area, and (ii) improved electronic coupling between CaH2ase redox-active sites and the electrode surface.     

Nanostructure of polysaccharide complexes

The interaction of gum arabic (GA) with chitosan (Ch) of different degree of deacetylation was studied by turbidity measurements, dynamic light scattering and atomic force microscopy. The structure of the complexes was found to be directly related to the charge density of chitosan molecules. Gum arabic and chitosan with a degree of deacetylation of 75% form soluble complexes with a loosely globular structure of about 250 nm, at weight ratios up to 1.2, if the concentrations are kept low (total biopolymer concentration up to 0.06%). If chitosan has a higher charge density (degree of deacetylation of 93%), colloidal particles are formed, independently of the polymer concentration or ratio. At low concentrations and GA/Ch ratios of 1 or 1.2, the particles have diameters of 200-250 nm. The formation of soluble complexes is attributed to a chitosan lower charge density and the presence of non-charged monomers, which prevent the efficient self-assembly of the macromolecules.     

Influence of the incorporated metal on template removal from MCM-41 type mesoporous materials

Al-modified MCM-41, La-modified MCM-41, and Ce-modified MCM-41 mesoporous materials were prepared with different molar ratios (Si/M = 10; 25; 50; 100 and 200) at room temperature. The materials were characterized using XRD, BET–BJH, and TG–DTA. The XRD showed four peaks, due to the ordered hexagonal array of parallel silica tubes, which could be indexed as (100), (110), (200), and (210), assuming a hexagonal unit cell. The surface area decreased as the concentration of the metal incorporated in the material increased. The thermal stability of the materials was around 650 °C. The CeO₂ phase made the mass transfer process more difficult, hindering Hofmann degradation and favoring oxidation.     

Study on the thermal behavior of the complexes of the type [PdX<Subscript>2</Subscript>(tdmPz)] (X = Cl<Superscript>−</Superscript>, Br<Superscript>−</Superscript>, I<Superscript>−</Superscript>, SCN<Superscript>−</Superscript>)

Four new mononuclear Pd(II) complexes of the type [PdX₂(tdmPz)] {X = Cl⁻ (1); Br⁻ (2); I⁻ (3); SCN⁻ (4); tdmPz = 1-thiocarbamoyl-3,5-dimethylpyrazole} have been synthesized and characterized by elemental analysis, IR spectroscopy, ¹H and ¹³C{¹H}-NMR experiments. The thermal behavior of the complexes 1–4 has been investigated by means of thermogravimetry (TG) and differential thermal analysis (DTA). From the initial decomposition temperatures, the thermal stability of the complexes can be ordered in the sequence: 3 < 4 ≡ 2 < 1. The final products of the thermal decompositions were characterized as metallic palladium by X-ray powder diffraction.