Novel betulin derivatives inhibit IFN-γ and modulates COX-2 expression

Abstract

Betulin (BE) is a pentacyclic triterpenes, obtained from natural sources and with several biological activities described, such as anti-tumoral and anti-inflammatory activities. The BE esterification at hydroxyl group (C-3 and C-28) resulted in five new ester derivatives with different numbers of carbons or halogens (chlorine and fluorine). Among these BE derivatives, two (2a e 2c) were able to significantly decrease IFN-g (*p?=?0.0391; **p?=?0.0156) and 2c modulated the expression of COX-2 better than Dexamethasone (DEXA). Regarding to cytotoxic assay, the best results were obtained for BE without modifications, with emphasis on tumoral cell lines Raji and MCF-7. The derivatives 2a and 2c showed immunomodulation activity (for the cytokines IFN-g). The presence of chorine in BE seems to be important for the ability of modulate COX-2 expression, since the ester chloride derivative 2c at 100?μM is more powerful inhibitor of COX-2 than DEXA.     

Vitamin C and Phenolic Antioxidants of Jua (Ziziphus joazeiro M.) Pulp: A Rich Underexplored Brazilian Source of Ellagic Acid Recovered by Aqueous Ultrasound-Assisted Extraction

Jua (juá in Portuguese) is an underexplored fruit from Brazil’s northeast. This fruit is rich in antioxidant substances. However, there is a dearth of information about jua’s bioactive potential. The present study evaluated two extraction methods (continuous agitation and ultrasound-assisted extraction—UAE) and employed three different solvents (water, ethanol, and acetone) to efficiently recover soluble phenolic compounds. Aqueous extracts obtained by UAE showed the highest total phenolic content (TPC) and antiradical activity. Besides being an eco-friendly procedure, extraction and/or solubility in an aqueous medium is also important for food application. Ellagic acids were the predominant phenolics (80%) found in aqueous jua pulp extract obtained by UAE, as determined by HPLC, while its TPC was 405.8 gallic acid equivalent per gram of fruit. This extract also exhibited a higher scavenging activity towards peroxyl radicals when compared to that of several other fruits from the literature, including grape, strawberry, cranberry, and walnuts, which are known references in terms of antioxidants. This is the first report that demonstrates jua pulp’s potential as an alternative source of ellagic acid and other phenolic acids and flavonoids. Therefore, the outcome of this study provides new information that can be useful for functional food and nutraceutical industries.     

Simulation of Organic Liquid Product Deoxygenation through Multistage Countercurrent Absorber/Stripping Using CO2 as Solvent with Aspen-HYSYS: Process Modeling and Simulation

In this work, the deoxygenation of organic liquid products (OLP) obtained through the thermal catalytic cracking of palm oil at 450 °C, 1.0 atmosphere, with 10% (wt.) Na₂CO₃ as a catalyst, in multistage countercurrent absorber columns using supercritical carbon dioxide (SC-CO₂) as a solvent, with an Aspen-HYSYS process simulator, was systematically investigated. In a previous study, the thermodynamic data basis and EOS modeling necessary to simulate the deoxygenation of OLP was presented. This work addresses a new flowsheet, consisting of 03 absorber columns, 10 expansions valves, 10 flash drums, 08 heat exchanges, 01 pressure pump, and 02 make-ups of CO₂, aiming to improve the deacidification of OLP. The simulation was performed at 333 K, 140 bar, and (S/F) = 17; 350 K, 140 bar, and (S/F) = 38; 333 K, 140 bar, and (S/F) = 25. The simulation shows that 81.49% of OLP could be recovered and that the concentrations of hydrocarbons in the extracts of absorber-01 and absorber-02 were 96.95 and 92.78% (wt.) on a solvent-free basis, while the bottom stream of absorber-03 was enriched in oxygenated compounds with concentrations of up to 32.66% (wt.) on a solvent-free basis, showing that the organic liquid products (OLP) were deacidified and SC-CO₂ was able to deacidify the OLP and obtain fractions with lower olefin contents. The best deacidifying condition was obtained at 333 K, 140 bar, and (S/F) = 17.     

镁掺杂氧化铈整体式催化剂催化CO2和CH3OH直接合成碳酸二甲酯

采用共沉淀法成功地合成了不同Mg掺杂量的Ce_1-xMg_xO₂(x=0.05、0.10、0.15、0.20)固溶体催化材料,并运用透射电子显微镜(TEM)、X射线衍射(XRD)、氮气吸附-脱附测试、拉曼光谱、X射线光电子能谱(XPS)、CO₂程序升温脱附(CO₂-TPD)等技术对这些材料进行了表征。结果发现,通过调控CeO₂晶格中Mg的含量,可以调控所制备的Ce_1-xMg_xO₂催化材料的粒径、比表面积、表面缺陷等。其中Ce_0.90Mg_0.10O₂展现了最佳的表面性质,具有最小的平均粒径(约5.8 nm),最大的比表面积(约136 m2·g^-1)以及最高的表面氧含量(31.98%)。将Ce_1-xMg_xO₂催化材料涂覆在堇青石蜂窝陶瓷上制成整体催化剂,考察其对CO₂和CH₃OH直接合成碳酸二甲酯的催化性能。在140℃、2.4 MPa、反应2 h的条件下,Ce_0.90Mg_0.10O₂整体催化剂上碳酸二甲酯的收率高达20.21%,催化效果明显优于CeO₂和其余的Ce_1-xMg_xO₂(x=0.05、0.15、0.20)催化材料。     

Induced polarization forward modelling using finite element method and the fractal model

The modeling of induced polarization data from 2D and 3D geological medium was developed. We applied the finite element method and the fractal model to complex resistivity of rocks as an intrinsic electrical property of geological medium. The LU factorization and pre-conditioned complex bi-conjugated gradient method were applied to solve the complex linear equation system. The modeling implemented in this work was efficient and prompt. In addition, the induced polarization survey using the fractal model as intrinsic property of the medium is a promising method for environmental investigation.     

Production of metakaolin from industrial cellulose waste

Research focused on the transformation and utilization of industrial wastes into products of commercial interest plays an increasingly important role. Residual pulp can become useful in the manufacture of different materials, providing high value to this waste and reducing its environmental impact when disposed of improperly in the environment. The main constituents of this waste are kaolin and calcium carbonate (CaCO₃). Starting from kaolin, metakaolin can be produced by calcination of the residue at 630?°C for 2?h in a rotary reactor with air flow, followed by solubilization with hydrochloric acid to remove the CaCO₃. The development of technological alternatives aimed at the reuse of certain wastes can result in applications of real economic interest to the chemical industry and ceramics and glass, which is the case in this study. The raw material and metakaolin obtained were analyzed by thermogravimetric analysis and derivative thermogravimetric analysis, X-ray diffraction, and X-ray fluorescence spectroscopy with promising results. This is because metakaolin was obtained free of contamination by other materials.     

Spectrophotometric determination of phenylephrine hydrochloride in pharmaceuticals by flow injection analysis exploiting the reaction with potassium ferricyanide and 4-aminoantipyrine

This paper presents a method for the determination of phenylephrine hydrochloride in pharmaceuticals by spectrophotometric flow injection analysis exploiting the reaction with potassium ferricyanide and 4-aminoantipyrine, which leads to the formation of a condensation product with strong absorptivity at 500 nm. The linear dynamic range was between 0.95 and 9 mg/L, with a limit of detection of 0.2 mg/L and a sampling throughput of 120 samples per hour. The method was applied to eyewashes and nasal decongestant liquid medicines.     

Synthesis of In<Subscript>2</Subscript>O<Subscript>3</Subscript>nanoparticles by thermal decomposition of a citrate gel precursor

This paper describes the synthesis of indium oxide by a modified sol–gel method, and the study of thermal decomposition of the metal complex in air. The characterization of the intermediate as well as the final compounds was carried out by thermogravimetry, differential thermal analysis, Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy, and small angle X-ray scattering. The results show that the indium complex decomposes to In₂O₃ with the formation of an intermediate compound. Nanoparticles of cubic In₂O₃ with crystallite sizes in the nanosize range were formed after calcination at temperatures up to 900°C. Calcined materials are characterized by a polydisperse distribution of spherical particles with sharp and smooth surfaces.This revised version was published online in August 2005 with a corrected issue number.     

From labdanes to drimanes. Degradation of the side chain of dihydrozamoranic acid

A new route for the degradation of the saturated side chain of dihydrozamoranic acid has been devised, giving an advanced intermediate, compound 14, useful for the synthesis of insect antifeedants such as warburganal and polygodial.     

Immobilization of oxomolybdenum species in a layered double hydroxide pillared by 2,2'-bipyridine-5,5'-dicarboxylate anions

A Zn,Al layered double hydroxide (LDH) with Zn/Al = 1.45 and containing nitrate anions was prepared by coprecipitation and characterized by powder X-ray diffraction, Zn K-edge extended X-ray absorption fine structure spectroscopy (EXAFS), thermogravimetric analysis, FTIR and FT Raman spectroscopy, and (27)Al MAS NMR spectroscopy. Three Zn...O and four Zn...M (M = Zn, Al) shells could be fitted to the low-temperature (40 K) EXAFS spectrum, in accordance with a model for an ordered cationic sheet. The nitrate anions were easily exchanged by 2,2'-bipyridine-5,5'-dicarboxylate anions, resulting in an increase in the basal spacing from 9 to 18 A. The basal spacing of the pillared derivative indicates that the anions are arranged with their longest dimension nearly perpendicular to the host layers. This material exhibits a high encapsulating ability, as evidenced by its interaction with a dichloromethane solution of the dioxomolybdenum(VI) complex MoO(2)Cl(2)(THF)(2). A material with a metal loading of 11.2 wt % was obtained. Molybdenum K-edge EXAFS analysis could not substantiate the formation of a supported complex of the type MoO(2)Cl(2)(N-N) but instead indicated the formation of unidentate-bridged entities of the type [O(2)Mo-O-MoO(2)] with a metal-metal separation of 3.29 A. The molybdenum-containing LDH was active as a catalyst for the liquid-phase epoxidation of cis-cyclooctene, 1-octene, and trans-2-octene using tert-butyl hydroperoxide as the oxygen source, yielding the corresponding epoxides as the only products. For reactions carried out with no additional solvent (other than n-decane) or in the presence of 1,2-dichloroethane, the solid catalyst could be recycled with no major loss of activity. Other tests confirmed that the systems functioned as true heterogeneous catalysts.