The Convergence Analysis of the Decomposition Method for the (1+1)-Parabolic Problem in Nonuniform Media

A modified Adomian decomposition method is used to find approximate solutions for the reaction diffusion convection equation in nonuniform medium, i.e., with space-dependent coefficients. In this approach, the solutions are found in the form of a convergent power series with easily computed components. Convergence analysis of modified Adomian series solution for a class of these type of PDEs is discussed.     

Evaluation of Polyphenols in Wine by Voltammetric Techniques with Screen Printed Carbon Electrodes

The electrochemical oxidation processes that occur during a voltammetric assay in wine samples lead to the formation of species that obstructs the surface and reduce their active area. This effect is critical for screen printed carbon electrodes (SPCE) and leads to abnormal low values of the total polyphenols content of wines, ca. 72 % lower than those obtained with glassy carbon electrodes. This effect was examined using 10 red and Port wine samples. Mechanical polishing and electrochemical‐based treatments for the removal of this fouling layer were tested. The best results were obtained by electrochemical activation in at a constant potential of 1.2 V during 100 s Na₂CO₃ saturated solution, and by polishing. The success of some of these treatments brings an added value to SPCE, as it opens the possibility of their reuse in the wine analysis. This outcome is particularly relevant for quality control where a huge number of analysis is performed and the reduction of cost may dictates the choice of the analytical method.     

A genetic algorithm with neural network fitness function evaluation for IMRT beam angle optimization

Intensity Modulated Radiotherapy Treatment (IMRT) is a technique used in the treatment of cancer, where the radiation beams are modulated by a multileaf collimator allowing the irradiation of the patient using non-uniform radiation fields from selected angles. Beam angle optimization consists in trying to find the best set of angles that should be used in IMRT planning. The choice of this set of angles is patient and pathology dependent and, in clinical practice, most of the times it is made using a trial and error procedure or simply using equidistantly distributed angles. In this paper we propose a genetic algorithm that aims at calculating good sets of angles in an automated way, given a predetermined number of angles. We consider the discretization of all possible angles in the interval [0 \(^{\circ }\) , 360 \(^{\circ }\) ], and each individual is represented by a chromosome with 360 binary genes. As the calculation of a given individual’s fitness is very expensive in terms of computational time, the genetic algorithm uses a neural network as a surrogate model to calculate the fitness of most of the individuals in the population. To explicitly consider the estimation error that can result from the use of this surrogate model, the fitness of each individual is represented by an interval of values and not by a single crisp value. The genetic algorithm is capable of finding improved solutions, when compared to the usual equidistant solution applied in clinical practice. The genetic algorithm will be described and computational results will be shown.     

Surfactant design for the 1,1,1,2-tetrafluoroethane-water interface: ab initio calculations and in situ high-pressure tensiometry

In situ high-pressure tensiometry and ab initio calculations were used to rationally design surfactants for the 1,1,1,2-tetrafluoroethane-water (HFA134a|W) interface. Nonbonded pair interaction (binding) energies (E(b)) of the complexes between HFA134a and candidate surfactant tails were used to quantify the HFA-philicity of selected moieties. The interaction between HFA134a and an ether-based tail was shown to be predominantly electrostatic in nature and much more favorable than that between HFA134a and a methyl-based fragment. The interfacial activity of (i) amphiphiles typically found in FDA-approved pressurized metered-dose inhaler (pMDI) formulations, (ii) a series of nonionic surfactants with methylene-based tails, and (iii) a series of nonionic surfactants with ether-based tails was investigated at the HFA134a|W interface using in situ tensiometry. This is the first time that the tension of the surfactant-modified HFA134a|W interface has been reported in the literature. The ether-based surfactants were shown to be very interfacially active, with tension decreasing by as much as 27 mN.m(-)(1). However, the methyl-based surfactants, including those from FDA-approved formulations, did not exhibit high activity at the HFA134a|W interface. These results are in direct agreement with the E(b) calculations. Significant differences in interfacial activity are noted for surfactants at the 2H,3H-perfluoropentane (HPFP)|water and HFA134a|W interfaces. Care should be taken, therefore, when results from the mimicking solvent (HPFP) are extrapolated to HFA134a-based systems. The results shown here are of relevance in the selection of surfactants capable of forming and stabilizing reverse aqueous aggregates in HFA-based pMDIs, which are promising formulations for the systemic delivery of biomolecules to and through the lungs.     

Thermal characterization of hydrotalcite used in the transesterification of soybean oil

Hydrotalcite was synthesised by co-precipitation method, calcined and characterized by XRD, BET, IR and TG/DTA/DTG analyses and tested as solid base catalyst in the transesterification of soybean oil with methanol, achieving a methyl ester content of 99.5%. The thermal decomposition of hydrotalcite calcined occurred in four mass loss steps at 28, 105, 203 and 400 °C. The hydrotalcite was recovered and through a simple evaluation by TG/DTA/DTG techniques it was found that at 500 °C is the temperature, where the organic matter should be eliminated from the catalyst. This study shows the importance of thermal analysis in the evaluation of the recovery temperature of hydrotalcite.     

Novel betulin derivatives inhibit IFN-γ and modulates COX-2 expression

Abstract

Betulin (BE) is a pentacyclic triterpenes, obtained from natural sources and with several biological activities described, such as anti-tumoral and anti-inflammatory activities. The BE esterification at hydroxyl group (C-3 and C-28) resulted in five new ester derivatives with different numbers of carbons or halogens (chlorine and fluorine). Among these BE derivatives, two (2a e 2c) were able to significantly decrease IFN-g (*p?=?0.0391; **p?=?0.0156) and 2c modulated the expression of COX-2 better than Dexamethasone (DEXA). Regarding to cytotoxic assay, the best results were obtained for BE without modifications, with emphasis on tumoral cell lines Raji and MCF-7. The derivatives 2a and 2c showed immunomodulation activity (for the cytokines IFN-g). The presence of chorine in BE seems to be important for the ability of modulate COX-2 expression, since the ester chloride derivative 2c at 100?μM is more powerful inhibitor of COX-2 than DEXA.     

Sequential spectrofluorimetric determination of free and total glycerol in biodiesel in a multicommuted flow system

A new procedure for spectrofluorimetric determination of free and total glycerol in biodiesel samples is presented. It is based on the oxidation of glycerol by periodate, forming formaldehyde, which reacts with acetylacetone, producing the luminescent 3,5-diacetyl-1,4-dihydrolutidine. A flow system with solenoid micro-pumps is proposed for solution handling. Free glycerol was extracted off-line from biodiesel samples with water, and total glycerol was converted to free glycerol by saponification with sodium ethylate under sonication. For free glycerol, a linear response was observed from 5 to 70 mg L⁻¹ with a detection limit of 0.5 mg L⁻¹, which corresponds to 2 mg kg⁻¹ in biodiesel. The coefficient of variation was 0.9% (20 mg L⁻¹, n = 10). For total glycerol, samples were diluted on-line, and the linear response range was 25 to 300 mg L⁻¹. The detection limit was 1.4 mg L⁻¹ (2.8 mg kg⁻¹ in biodiesel) with a coefficient of variation of 1.4% (200 mg L⁻¹, n = 10). The sampling rate was ca. 35 samples h⁻¹ and the procedure was applied to determination of free and total glycerol in biodiesel samples from soybean, cottonseed, and castor beans.     

Elucidating the Nature of the External Acid Sites of ZSM-5 Zeolites Using NMR Probe Molecules

The identification of acid and nonacid species at the external surface of zeolites remains a major challenge, in contrast to the extensively-studied internal acid sites. Here, it is shown that the synthesis of zeolite ZSM-5 samples with distinct particle sizes, combined with solid-state NMR and computational studies of trimethylphosphine oxide (TMPO) adsorption, provides insight into the chemical species on the external surface of the zeolite crystals. ¹H–³¹P HETCOR NMR spectra of TMPO-loaded zeolites exhibit a broad correlation peak at δ_P ∼35–55 ppm and δ_H ∼5–12 ppm assigned to external SiOH species. Pore-mouth Brønsted acid sites exhibit ³¹P and ¹H NMR resonances and adsorption energies close to those reported for internal acid sites interacting with TMPO. The presence of an external tricoordinate Al-Lewis site interacting strongly with TMPO is suggested, resulting in ³¹P resonances that overlap with the peaks usually ascribed to the interaction of TMPO with Brønsted sites.     

Vitamin C and Phenolic Antioxidants of Jua (Ziziphus joazeiro M.) Pulp: A Rich Underexplored Brazilian Source of Ellagic Acid Recovered by Aqueous Ultrasound-Assisted Extraction

Jua (juá in Portuguese) is an underexplored fruit from Brazil’s northeast. This fruit is rich in antioxidant substances. However, there is a dearth of information about jua’s bioactive potential. The present study evaluated two extraction methods (continuous agitation and ultrasound-assisted extraction—UAE) and employed three different solvents (water, ethanol, and acetone) to efficiently recover soluble phenolic compounds. Aqueous extracts obtained by UAE showed the highest total phenolic content (TPC) and antiradical activity. Besides being an eco-friendly procedure, extraction and/or solubility in an aqueous medium is also important for food application. Ellagic acids were the predominant phenolics (80%) found in aqueous jua pulp extract obtained by UAE, as determined by HPLC, while its TPC was 405.8 gallic acid equivalent per gram of fruit. This extract also exhibited a higher scavenging activity towards peroxyl radicals when compared to that of several other fruits from the literature, including grape, strawberry, cranberry, and walnuts, which are known references in terms of antioxidants. This is the first report that demonstrates jua pulp’s potential as an alternative source of ellagic acid and other phenolic acids and flavonoids. Therefore, the outcome of this study provides new information that can be useful for functional food and nutraceutical industries.