An RVE-based multiscale modeling method for constitutive relations

This article reports an efficient method to characterize constitutive responses based on multiscale modeling for fluid flow in heterogeneous media based on the concept of representative volume element (RVE). Between different scales, it is considered as the basic principles for down-scaling information the conservation of velocity and of the strain rate tensor. Within this context, we formulate (i) the problem to be solved at the micro-scale, (ii) the up-scaling procedure which involves homogenization rules, and (iii) the generalized principle of multiscale virtual power. The complete theory for constitutive modeling is revisited and shown that when employing multiscale analysis among the suitable variational arguments we are able to obtain, in a straightforward manner, new constitutive behavior between kinematic motions and actions. Some examples of application of fluid flow in heterogeneous media with obstacles are presented to show the consequences of the proposed approach.     

Soliton–like pulse dynamics in add–drop optical filters based on nonlinear fiber grating couplers

The dynamics characteristics of picosecond soliton-like pulses propagating through add–drop optical filters, based on lossless uniform and Gaussian nonlinear fiber grating couplers, are numerically investigated under different power levels. To obtain the temporal profiles, the nonlinear coupled-mode equations, that model these devices, are solved numerically. These devices can perform the extraction (drop) of an optical signal, since there is the reflection of a pulse previously switched between adjacent waveguides. The extraction efficiency, recurrently better at low power levels, is subordinated to the matching between the associated spectra of the input pulses and the hybrid devices analyzed. The switching effects, as well the gratings responsiveness, impact on the outputs profiles, since diverse temporal shapes can be obtained. The results reinforce the importance and the potential of properly engineered structures for all-optical processing requirements.     

Preparation of stable MCM-48 tubular membranes

Stable mesoporous membranes with a cubic structure, based on the MCM-48 material, were successfully prepared on alumina supports by hydrothermal synthesis, starting from sols having both CTABr and TPAOH structure directing agents. The inclusion of a zeolite (MFI-type) precursor during membrane synthesis led to partial zeolite incorporation into the porous structure, giving rise to a hydrothermally stable membrane. The mean pore diameter of the membrane was 2.5 nm, and permeation experiments confirmed that transport across the membrane was governed by Knudsen diffusion and that there were no pinholes.     

Synthesis and characterization of novel indole-containing half-crowns as new emissive metal probes

Two new indole derivatives have been synthesized by a one-pot procedure and their potential as fluorescence probes for metal ions was investigated. The sensor capability of 1 and 2 toward cations such as Ag⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, and Hg²⁻ was studied in dichloromethane solution by absorption, fluorescence emission, and ¹H NMR titrations. Both probes showed selectivity for Ag⁺ and Hg²⁺ ions. The results suggest that these compounds may serve as promising models for future design of novel and more potent sensors.     

Comparison of adsorption equilibrium of fructose, glucose and sucrose on potassium gel-type and macroporous sodium ion-exchange resins

Adsorption equilibrium of fructose, glucose and sucrose was evaluated on sulfonated poly(styrene-co-divinylbenzene) cation-exchange resins. Two types of resins were used: potassium (K⁺) gel-type and sodium (Na⁺) macroporous resins. Influence of the cation and effect of the resin structure on adsorption were studied. The adsorption isotherms were determined by the static method in batch mode for mono-component and multi-component sugar mixtures, at 25 and 40 °C, in a range of concentrations between 5 and 250 g L⁻¹. All adsorption isotherms were fitted by a linear model in this range of concentrations. Sugars were adsorbed in both resins by the following order: fructose > glucose > sucrose. Sucrose was more adsorbed in the Na⁺ macroporous resin, glucose was identically adsorbed, and fructose was more adsorbed in the K⁺ gel-type resin. Data obtained from the adsorption of multi-component mixtures as compared to the mono-component ones showed a competitive effect on the adsorption at 25 °C, and a synergetic effect at 40 °C. The temperature increase conducted to a decrease on the adsorption capacity for mono-component sugar mixtures, and to an increase for the multi-component mixtures. Based on the selectivity results, K⁺ gel-type resin seems to be the best choice for the separation of fructose, glucose and sucrose, at 25 °C.     

Influence of physical-chemical interactions on the thermal stability and surface properties of poly(vinyl chloride)-b-poly(hydroxypropyl acrylate)-b-poly(vinyl chloride) block copolymers

The synthesis of poly(vinyl chloride) (PVC) homopolymers and poly(vinyl chloride)-b-poly(hydroxypropyl acrylate)-b-poly(vinyl chloride) (PVC-b-PHPA-b-PVC) block copolymers via a single electron - degenerative transfer mediated living radical polymerisation was carried out on a pilot scale in industrial facilities. The thermal stability of the products was assessed conductimetrically. The block copolymers, that contained a low content of PHPA (below 12 wt.%), showed thermal stability that was approximately three times greater than that of conventional PVC. Inverse gas chromatography study of the copolymers surface showed that there was a decrease in the dispersive component and greater Lewis acidity and basicity constants were observed relative to those of PVC. The thermal stabilisation of PVC when in the presence of PHPA is explained by the interactions between its functional groups and the structures formed during the thermal degradation. The thermal stability and the surface properties of PVC-b-PHPA-b-PVC were strongly dependent on the molecular weight of the block copolymer. Lewis acid-base interaction parameters were determined and are interpreted as evidence of the PVC-b-PHPA-b-PVC compatibilising function in PVC-wood flour composites.     

Thermal characterization of hydrotalcite used in the transesterification of soybean oil

Hydrotalcite was synthesised by co-precipitation method, calcined and characterized by XRD, BET, IR and TG/DTA/DTG analyses and tested as solid base catalyst in the transesterification of soybean oil with methanol, achieving a methyl ester content of 99.5%. The thermal decomposition of hydrotalcite calcined occurred in four mass loss steps at 28, 105, 203 and 400 °C. The hydrotalcite was recovered and through a simple evaluation by TG/DTA/DTG techniques it was found that at 500 °C is the temperature, where the organic matter should be eliminated from the catalyst. This study shows the importance of thermal analysis in the evaluation of the recovery temperature of hydrotalcite.     

Uncertainty in the determination of glucose in aqueous solutions by high‐performance liquid chromatography with evaporative light scattering detection

The determination of glucose and other carbohydrates is the most widespread chemical analysis that is performed within the industries of food, beverage, forage, biomass, pulp and paper, pharmaceuticals among others. Besides that, sugar refineries need to control their products, by‐products and effluents, and furthermore, glucose in the sucrose refining process, is considered an impurity, which shall be controlled. Being HPLC the most currently instrumental technique used for glucose analysis, the evaporative light scattering detector (ELSD) offers advantages (sensitivity, possibility for operating in gradient mode) over the also used refractive index detector. In this work, an HPLC‐ELSD methodology was optimised and validated, aiming the estimate of the uncertainty associated with the results at low levels of concentration of glucose to be measured. Linearity of the response was obtained in the range of glucose concentrations from 20 to 300 mg/L, with an analysis time of 10 min. The global uncertainty was estimated accordingly to the bottom‐up approach used by Eurachem. It was 13% on average for concentrations from 100 to 300 mg/L. For lower concentrations, uncertainty increased significantly up to 30% in the vicinity of the LOD of the method.