Charged molecular films on brownian particles: structure, interactions, and relation to stability

The interfacial film of physically adsorbed ionic amphiphilic molecules on submicron particles dispersed in water was studied by a combination of surface tension measurements, laser light scattering (LLS) and high-shear experiments in a microchannel. General features in the structure and morphology of the molecular film are identified and understood in the framework of the two-step Langmuir adsorption model deduced from the adsorption isotherm. On the basis of this approach, the phase transitions and structural ordering of the film at the solid-liquid interface are analyzed in detail. A novel methodology based on high-shear aggregation experiments subsequently analyzed by means of LLS is proposed and turns out to be able to provide significant information on the phase transitions and structural arrangements of the adsorbed molecules (in substantial agreement with the adsorption isotherm model) as well as on the resulting interactions. Particularly important for applications is the result that, with no added salt, the films on two particles can adhere/fuse, leading to aggregation as long as an uncovered (hydrophobic) patch is present (unsaturated molecular layers). In the opposite case of fully developed layers, by analyzing the mechanism of shear aggregation of charged particles in the low-salt limit, we show that, when the hydrophobic attraction is absent, short-range hydration repulsive forces dominate over Derjaguin-Landau-Verwey-Overbeek (DLVO) forces and adhesion can never be achieved even upon application of very high collision energies. Consistently, a lower limiting boundary for the hydration interaction is calculated and found to be in agreement with data in the literature.     

Analysis of phenolic compounds in extra virgin olive oil by using reversed-phase capillary electrochromatography

In this work, the simultaneous separation of ten phenolic compounds (protocatechuic, p-coumaric, o-coumaric, vanillic, ferulic, caffeic, syringic acids, hydroxytyrosol, tyrosol and oleuropein) in extra virgin olive oils (EVOOs) by isocratic RP CEC is proposed. A CEC method was optimized in order to completely resolve all the analyzed compounds by studying several experimental parameters. The influence of the stationary phase type (C(18) and C(8) modified silica gel), buffer concentration and pH as well as the organic modifier content of the mobile phase on retention factors, selectivity and efficiency were evaluated in details. A capillary column packed with Cogent bidentate C(18) particles for 23 cm and a mobile phase composed by 100 mM ammonium formate buffer pH 3/H(2)O/ACN (5:65:30 v/v/v) allowed the baseline resolution of the compounds under study in less than 35 min setting the applied voltage and temperature at 22 kV and 20 degrees C, respectively. A study, evaluating the intra- and interday precision as well as LOD and LOQ and method linearity was developed in accordance with the analytical procedures for method validation. LODs were in the range of 0.015-2.5 microg/mL, while calibration curves showed a good linearity (r(2) >0.997). The CEC method was applied to the separation and determination of these compounds in EVOO samples after a suitable liquid-liquid extraction procedure. The mean recovery values of the studied compounds ranged between 87 and 99%.     

A comparison of results obtained using liquid injection and headspace solid-phase microextraction for crude oil analysis by GC with mass spectrometer detection

Gas chromatographic (GC) analysis in solution and head space solid-phase microextraction (SPME)-GC analysis of a sample of crude oil gave different results. The SPME technique allowed the identification of a larger number of components than by using usual GC-mass spectrometry (MS). The method failed within the range of C14-C25 where GC-MS in solution allowed to obtain more representative results; on the contrary, SPME allowed to obtain data on the presence of volatile compounds that can not be identified in GC-MS analysis in solution. Furthermore, in the range C8-C12, SPME allowed to identify approximately 30 compounds not shown in the GC-MS analysis in solution. SPME analysis showed the presence of some alkenes not identified in GC-MS analysis in solution. SPME-GC-MS can be used in the analysis of crude oil in contaminated soil.     

Capillary electrochromatography without external pressure assistance. Use of packed columns with a monolithic inlet frit

A fused silica capillary column was packed with RP(18) silica stationary phase entrapping the particles between two frits obtained by two different procedures. The inlet frit consisted of a short organic polymer made via a thermopolymerization process while the outlet frit was prepared by sintering the octadecylsilica (ODS) material. The packed column was employed in capillary electrochromatography (CEC) experiments for the separation of three selected test compounds. Retention time and separation efficiency were evaluated. Results were compared with those ones obtained with a packed capillary containing the same stationary phase entrapped between two sinterized frits. The novel packed column exhibited comparable separation efficiency and resolution with the traditional one. However, it allowed experiments without pressure support during the runs with no bubble formation.     

Synchronous fluorescence spectroscopy and gas chromatography to determine the effect of UV irradiation on crude oil

The fate of the crude oil under irradiation was studied. After the UV irradiation, the fraction present in the highest percentage shifted from C8–C9 fraction to C13 one, in GC–MS analysis. An increase of the relative amount of the C13–C25 fraction was observed, while a decrease in the relative amount of the C7–C12 fractions was present. The synchronous fluorescence spectrum showed a maximum at 396 nm. Two hours irradiation of the sample induced an increase of the fluorescence emission in the region 420–550 nm. After 20, 40, 60, and 100 h irradiation we observed a decrease of the fluorescence emission.     

Redox state of coenzyme Q10 determines its membrane localization

The interaction between oxidized (ubiquinone-10) and reduced (ubiquinol-10) coenzyme Q 10 with dimyristoylphosphatidylcholine has been examined by differential scanning microcalorimetry, X-ray diffraction, infrared spectroscopy, and (2)H NMR. Microcalorimetry experiments showed that ubiquinol-10 perturbed considerably more the phase transition of the phospholipids than ubiquinone-10, both forms giving rise to a shoulder of the main transition peak at lower temperatures. Small angle X-ray diffraction showed an increase in d-spacing suggesting a thicker membrane in the presence of both ubiquinone-10 and ubiquinol-10, below the phase transition and a remarkable broadening of the peaks indicating a loss of the repetitive pattern of the lipid multilamellar vesicles. Infrared spectroscopy showed an increase in wavenumbers of the maximum of the CH 2 stretching vibration at temperatures below the phase transition, in the presence of ubiquinol-10, indicating an increase in the proportion of gauche isomers in the gel phase, whereas this effect was smaller for ubiquinone-10. A very small effect was observed at temperatures above the phase transition. (2)H NMR spectroscopy of perdeuterated DMPC showed only modest changes in the spectra of the phospholipids occasioned by the presence of coenzyme Q 10. These small changes were reflected, in the presence of ubiquinol-10, by a decrease in resolution indicating that the interaction between coenzyme Q and phospholipids changed the motion of the lipids. The change was also visible in the first spectral moment (M1), which is related with membrane order, which was slightly decreased at temperatures below the phase transition especially with ubiquinol-10. A slight decrease in M 1 values was also observed above the phase transition but only for ubiquinol-10. These results can be interpreted to indicate that most ubiquinone-10 molecules are localized in the center of the bilayer, but a considerable proportion of ubiquinol-10 molecules may span the bilayer interacting more extensively with the phospholipid acyl chains.     

On the regularity of the pressure field of Brenier’s weak solutions to incompressible Euler equations

In this paper we improve the regularity in time of the gradient of the pressure field arising in Brenier’s variational weak solutions (Comm Pure Appl Math 52:411–452, 1999) to incompressible Euler equations. This improvement is necessary to obtain that the pressure field is not only a measure, but a function in . In turn, this is a fundamental ingredient in the analysis made by Ambrosio and Figalli (2007, preprint) of the necessary and sufficient optimality conditions for the variational problem by Brenier (J Am Mat Soc 2:225–255, 1989; Comm Pure Appl Math 52:411–452, 1999).     

Self-assembled monolayers of an oligo(ethylene oxide) disulfide and its corresponding thiol assembled from water: characterization and protein resistance

Self-assembled monolayers (SAMs) of the disulfide [S(CH2CH2O)6CH3]2 ([S(EO)6]2) on Au from 95% ethanol and from 100% water are described. Spectroscopic ellipsometry and reflection-absorption infrared spectroscopy indicate that the [S(EO)6]2 films are similar to the disordered films of HS(CH2CH2O)6CH3 ((EO)6) and HS(CH2)3O(CH2CH2O)5CH3 (C3EO5) at their protein adsorption minima. The [S(EO)6]2 SAMs exhibit constant film thickness (d) of 1.2 +/- 0.2 nm over long immersion times (up to 20 days) and do not attain the highly ordered, 7/2 helical structure of the (EO)6 and C3EO5 SAMs (d = 2.0 nm). Exposure of these self-limiting [S(EO)6]2 SAMs to bovine serum albumin show high resistance to protein adsorption.     

Fabrication, structural characterization, and applications of langmuir and langmuir-blodgett films of a poly(azo)urethane

The synthesis of a poly(azo)urethane by fixing CO(2) in bis-epoxide followed by a polymerization reaction with an azodiamine is presented. Since isocyanate is not used in the process, it is termed "clean method" and the polymers obtained are named "NIPUs" (non-isocyanate polyurethanes). Langmuir films were formed at the air-water interface and were characterized by surface pressure vs mean molecular area per mer unit (Pi-A) isotherms. The Langmuir monolayers were further studied by running stability tests and cycles of compression/expansion (possible hysteresis) and by varying the compression speed of the monolayer formation, the subphase temperature, and the solvents used to prepare the spreading polymer solutions. The Langmuir-Blodgett (LB) technique was used to fabricate ultrathin films of a particular polymer (PAzoU). It is possible to grow homogeneous LB films of up to 15 layers as monitored using UV-vis absorption spectroscopy. Higher number of layers can be deposited when PAzoU is mixed with stearic acid, producing mixed LB films. Fourier transform infrared (FTIR) absorption spectroscopy and Raman scattering showed that the materials do not interact chemically in the mixed LB films. The atomic force microscopy (AFM) and micro-Raman technique (optical microscopy coupled to Raman spectrograph) revealed that mixed LB films present a phase separation distinguishable at micrometer or nanometer scale. Finally, mixed and neat LB films were successfully characterized using impedance spectroscopy at different temperatures, a property that may lead to future application as temperature sensors. Principal component analysis (PCA) was used to correlate the data.