Single‐Step Sulfo‐Selenization Method to Synthesize Cu2ZnSn(SySe1−y)4 Absorbers from Metallic Stack Precursors

Pentenary Cu₂ZnSn(S_ySe_1?y)₄ (kesterite) photovoltaic absorbers are synthesized by a one‐step annealing process from copper‐poor and zinc‐rich precursor metallic stacks prepared by direct‐current magnetron sputtering deposition. Depending on the chalcogen source—mixtures of sulfur and selenium powders, or selenium disulfide—as well as the annealing temperature and pressure, this simple methodology permits the tuning of the absorber composition from sulfur‐rich to selenium‐rich in one single annealing process. The impact of the thermal treatment variables on chalcogenide incorporation is investigated. The effect of the S/(S+Se) compositional ratio on the structural and morphological properties of the as‐grown films, and the optoelectronic parameters of solar cells fabricated using these absorber films is studied. Using this single‐step sulfo‐selenization method, pentenary kesterite‐based devices with conversion efficiencies up to 4.4 % are obtained.     

Substrate promiscuity in DNA methyltransferase M.PvuII. A mechanistic insight

M.PvuII is a DNA methyltransferase from the bacterium Proteus vulgaris that catalyzes methylation of cytosine at the N4 position. This enzyme also displays promiscuous activity catalyzing methylation of adenine at the N6 position. In this work we use QM/MM methods to investigate the reaction mechanism of this promiscuous activity. We found that N6 methylation in M.PvuII takes place by means of a stepwise mechanism in which deprotonation of the exocyclic amino group is followed by the methyl transfer. Deprotonation involves two residues of the active site, Ser53 and Asp96, while methylation takes place directly from the AdoMet cofactor to the target nitrogen atom. The same reaction mechanism was described for cytosine methylation in the same enzyme, while the reversal timing, that is methylation followed by deprotonation, has been described in M.TaqI, an enzyme that catalyzes the N6-adenine DNA methylation from Thermus aquaticus. These mechanistic findings can be useful to understand the evolutionary paths followed by N-methyltransferases.     

Generation and intermolecular reactions of 3-indolylacyl radicals

The generation of 3-indolylacyl radicals from the corresponding phenyl selenoesters and the scope of their participation in intermolecular addition reactions to carbon-carbon double bonds under both reductive and nonreductive conditions have been studied.     

Liquid chromatograpic-mass spectrometric analysis of phenolics and free radical scavenging activity of rosemary extract from different raw material

The antioxidant activity of rosemary (Rosmarinus officinalis) extract from different raw materials has been studied. Extracts were prepared from wild or drip-irrigated plants, as well as from the by-product resulting from the distillation of the aromatic essential oil. The radical scavenging activity of rosemary extracts was compared with that of antioxidants widely used in food, such as BHT and delta-tocopherol, using an optimization of the method based on the reduction of the radical 2,2-diphenyl-1-picrylhydrazyl (DPPH). The results pointed the excellent antioxidant activity of the crude fresh rosemary extracts, which was almost identical to that of pure delta-tocopherol, and higher than that of BHT; extracts prepared from distilled rosemary showed the lowest activity, although they are also of interest due to the low cost of the raw material. High performance liquid chromatography (HPLC) combined with diode array (DAD) and electrospray (ESI)-ion trap-MS detection was used to separate and identify the compounds present in the rosemary extracts. Rosmarinic acid, carnosic acid and seven of their terpene-type metabolites, and seven flavones were identified. The drying and/or distillation treatments used with the plant material strongly affected the content of the two compounds of higher antioxidant activity: rosmarinic acid and carnosic acid.     

Energy loss of deuterons in 3He gas: a threshold effect

The energy loss of deuterons in ³He gas was measured at E _d = 15 to 100 keV using the ³He pressure dependence of the ³He(d,p)⁴He cross-section at a given incident energy. At the highest energies, the observed energy loss is in good agreement with a standard compilation. However, with decreasing energy the experimental values drop steadily below the theoretical values and near E _d = 18 keV they drop sharply (within 1 keV) reaching the domain of nuclear stopping power. This threshold behavior is due to the minimum 1s → 2s electron excitation of the He target atoms, i.e. it is a quantum effect. Some consequences are discussed.     

Analysis of a hydrostatic transmission driveline for its use in off-road multiple axle vehicles

There is a vast range of off-road multi-axle wheeled vehicle configurations. Some of the most common are the three axle rigid vehicles or the four axle articulated vehicles. However, these types of vehicles have the problem of using very complex transmission configurations. In addition, the requirements in terms of torque in each of the wheels are quite variable and non uniform. This work aims to model and study, from the standpoint of performance and energy efficiency, the driveline of such vehicles. The modelling process for the design and analysis of a hydrostatic transmission aimed at off-road multiple axle vehicles has been conceptually described. Mathematical models for the main components of the transmission and a global model of the driveline have been defined. A specific example study is presented, applying the described procedure. Results show that the overall performance of the transmission is highly dependent on the operating conditions, on the selected configuration and on the used components. The results also show that the actual instantaneous efficiency of each of the components is usually far below their maximum catalogue value. In the case study efficiencies up to 64% have been reached for the overall transmission.     

Using Grote-Hynes theory to quantify dynamical effects on the reaction rate of enzymatic processes. The case of methyltransferases

Dynamical effects have recently received much attention in the context of the theoretical investigation of enzymatic catalysis. In this paper we use a combination of Grote-Hynes theory with quantum mechanical/molecular mechanical modeling that is a powerful tool to understand and quantify these dynamical effects in a particular enzyme, the glycine N-methyltransferase (GNMT). Comparison of the results obtained for this enzyme with another methyltransferase (catechol O-methyltransferase, COMT) allows us to understand the different nature of the coupling of the environment to the reaction coordinate as a function of the electrostatic interaction established by the reactive subsystem. The transmission coefficients obtained using Grote-Hynes theory are in excellent agreement with molecular dynamics estimations and show that the coupling is higher in GNMT than in COMT. The larger friction observed in GNMT is explained on the basis of the interaction established by the substrate in the active site. The larger value of the friction leads to a smaller value of the reaction frequency and thus also to a larger disagreement with the estimation of the transmission coefficient based on the frozen environment approach.     

The reactions of 4-hydroxy-2-pyrones with 2-hydroxybenzaldehydes. A note of warning

The reaction between 2-hydroxybenzaldehyde and 4-hydroxy-6-methyl-2-pyrone (triacetic acid lactone) affords 3-acetoacetyl-2-chromenone, 7 , instead of 3-(2-hydroxybenzylidene)-6-methyl-3,4-dihydro-2H-pyran-2,4-dione, 6 . The structures previously reported in the literature for the products formed in the reactions of 4-hydroxy-2-chromenone with 2-hydroxybenzaldehydes in a molar ratio 1:1 are considered erroneous. Thus, the previously reported 3-(2-hydroxybenzylidene)chroman-2,4-dione, 10 , should be formulated as 3-(2-hydroxybenzoyl)-2-chromenone, 11 .