Total synthesis of prolycopene, a novel 7,9,7′,9′-tetra-cis(Z) carotenoid and main pigment of the tangerine tomato Lycopersicon esculentum

A total synthesis of the 7,9,7′,9′-tetra-cis(Z) isomer of lycopene, also known as ‘prolycopene’, produced as the major carotenoid pigment in fruits of the tangerine tomato Lycopersicon esculentum (‘Tangella’) is described. The synthesis is based on: (i) a modified Sonogashira coupling reaction between the E-alkenyl bromide 6 and the Z-enynol 7, leading to the 2Z-trienynol 8, followed by (ii) a Wittig reaction between the phosphonium salt 4 and the C₁₀-triene dialdehyde 5 producing the symmetrical 9,9′-Z isomer of the bis-acetylene 3 and (iii) semi-hydrogenation of 3 in the presence of Lindlar's catalyst, and chromatography.     

Citrate, in collaboration with a guanidinium ion, as a generator of cubane-like complexes with a range of metal cations: synthesis, structures, and magnetic properties of [C(NH2)3]8[(M(II))4(cit)4].8H2O (M = Mg, Mn, Fe, Co, Ni, and Zn; cit = Citrate)

Aqueous reaction mixtures containing citric acid, guanidinium carbonate, and a range of metal cations (Mg2+, Mn2+, Fe2+, Co2+, Ni2+, and Zn2+) at room temperature give crystalline products of composition [C(NH2)3]8[(M(II))4(cit)4].8H2O (cit = citrate). In all cases, the crystals are suitable for single-crystal X-ray diffraction studies, which reveal that the compounds are isostructural (space group P4(2)/n; a approximately 16.2 A, and c approximately 11.5 A). As was intended, cubane-like [M4(cit)4]8- complex anions are present. The individual citrate units are chiral, but each cubane unit contains two of one hand and two of the other, related around an S4 axis. The cubane units are involved in no less than 40 H-bonding interactions with guanidinium cations and lattice water molecules. Detailed susceptibility and magnetization studies show that the intracluster magnetic coupling within the Mn(II), Fe(II), Co(II), and Ni(II) cubanes is very weak in all cases with J values of -0.82, -0.43, and -0.09 cm(-1) for the Mn, Fe, and Co species, respectively. A two-J model gave the best agreement with the susceptibility and high-field magnetization data for the Ni(II) case, over the whole temperature range studied, and the sign of the parameters, J12 = -0.3 cm(-1) and J13 = +2.97 cm(-1), correlated with the two Ni-(mu3-O)-Ni angles observed in the cluster structure. All members of the 3d-block [M4(cit)4]8- family have spin ground states, ST, of zero, with the higher ST levels just a few reciprocal centimeters away in energy.     

In situ synthesis of trisubstituted methanol ligands and their potential as one-pot generators of cubane-like metal complexes

Two different one pot routes to a variety of metal cubane compounds are reported; one route is based on an in situ benzilic acid type rearrangement and the other involves in situ nucleophilic attack at a ketone. Diketosuccinic acid in basic solution in the presence of certain divalent metal ions undergoes a benzilic acid type rearrangement to generate the carbon oxyanion, C(CO(2) (-))(3)O(-), which serves as a cubane-forming bridging ligand in a series of octanuclear complexes of composition [M(8){C(CO(2))(3)O}(4)](H(2)O)(12) (M=Mg, Mn, Fe, Co, Ni, Zn). At the heart of each of these highly symmetrical aggregates is an M(4)O(4) cubane core, each oxygen component of which is provided by the alkoxo centre of a C(CO(2) (-))(3)O(-) ligand. Reaction of 2,2'-pyridil, (2-C(5)H(4)N)COCO(2-C(5)H(4)N), and calcium nitrate in basic alcoholic solution, which proceeds by a similar benzilic acid type rearrangement, gives the cubane compounds, [Ca(4)L(4)(NO(3))(4)] in which L=(2-C(5)H(4)N)(2)C(COOR)O(-) (R=Me or Et). Nucleophilic attack by bisulfite ion at the carbonyl carbon atom of 2,2'-dipyridyl ketone in the presence of certain divalent metals generates the electrically neutral complexes, [{(C(5)H(4)N)(2)SO(3)C(OH)}(2)M] (M=Mn, Fe, Co, Ni, Zn and Cd). Cubane-like complexes [M(4){(C(5)H(4)N)(2)SO(3)C(O)}(4)] (M=Zn, Mn) can be obtained directly from 2,2'-dipyridyl ketone in one-pot reaction systems (sealed tube, 120 degrees C) if a base as weak as acetate ion is present to deprotonate the OH group of the initial [(C(5)H(4)N)(2)SO(3)C(OH)](-) bisulfite addition compound; the [(C(5)H(4)N)(2)SO(3)C(O)](2-) ligand in this case plays the same cubane-forming role as the ligands C(COO(-))(3)O(-) and (2-C(5)H(4)N)(2)C(COOR)O(-) above. When excess sodium sulfite is used in similar one-pot reaction mixtures, the monoanionic complexes, [M(3)Na{(C(5)H(4)N)(2)SO(3)C(O)}(4)](-) (M=Zn, Mn, Co) with an M(3)NaO(4) cubane core, are formed directly from 2,2'-dipyridyl ketone.     

The crystallisation of chromite-magnesiochromite spinels from a calcium magnesium aluminosilicate glass: Nucleation,crystal growth and final crystal sizes

The crystallisation of chromite-magnesiochromite spinels was studied from a calcium magnesium aluminosilicate glass (a simulated slag) containing 3 to 12 percent total iron oxides and 0.3 to 1.5 percent chromium(III) oxide, at temperatures from 1400° to 700 °C. – Spinel crystallisation occurred in glasses with 3–7 percent FeO and 0.7–1.1 percent Cr₂O₃. At temperatures 1100 °C and above, the nucleation was rapid and crystal numbers very high, at FeO contents above 3 percent and Cr₂O₃ contents above 0.7 percent; at 1056° and 1000 °C however, the crystal numbers reached some optimum values but then decreased as clinopyroxene crystals grew onto and enveloped the spinel microcrystals. In these glasses, the crystal lengths varied with growth time according to the relation, l_t = 2 k_g t^α = R_g1 t^α, where α = 0.7–1.0: this time dependence was a compromise between a relation for dendritic growth and one for facetted growth. The growth rates generally increased about five to seven times for 160 °C temperature rise: the energy of activation for the spinel crystal growth was then estimated as 180 ± 60 kJ mole⁻¹. – No spinel crystals were observed in glasses with more than 7 percent FeO content, only clinopyroxene crystals. Probably, these latter had nucleated rapidly and grown onto spinel microcrystals, while the spinel microcrystals were still of < 0.1 μm size.     

Biodegradable Nanoparticles Loaded with Levodopa and Curcumin for Treatment of Parkinson’s Disease

Background: Parkinson’s disease (PD) is the second most common age-related neurodegenerative disorder. Levodopa (L-DOPA) remains the gold-standard drug available for treating PD. Curcumin has many pharmacological activities, including antioxidant, anti-inflammatory, antimicrobial, anti-amyloid, and antitumor properties. Copolymers composed of Poly (ethylene oxide) (PEO) and biodegradable polyesters such as Poly (ε-caprolactone) (PCL) can self-assemble into nanoparticles (NPs). This study describes the development of NH₂–PEO–PCL diblock copolymer positively charged and modified by adding glutathione (GSH) on the outer surface, resulting in a synergistic delivery of L-DOPA curcumin that would be able to pass the blood–brain barrier. Methods: The NH₂–PEO–PCL NPs suspensions were prepared by using a nanoprecipitation and solvent displacement method and coated with GSH. NPs were submitted to characterization assays. In order to ensure the bioavailability, Vero and PC12 cells were treated with various concentrations of the loaded and unloaded NPs to observe cytotoxicity. Results: NPs have successfully loaded L-DOPA and curcumin and were stable after freeze-drying, indicating advancing into in vitro toxicity testing. Vero and PC12 cells that were treated up to 72 h with various concentrations of L-DOPA and curcumin-loaded NP maintained high viability percentage, indicating that the NPs are biocompatible. Conclusions: NPs consisting of NH₂–PEO–PCL were characterized as potential formulations for brain delivery of L-DOPA and curcumin. The results also indicate that the developed biodegradable nanomicelles that were blood compatible presented low cytotoxicity.