Synthesis and characterization of carboxylic acid‐terminated polyisobutylenes

tert-Chloride-terminated polyisobutylenes (PIB) (1020 ≤ M_n ≤ 6700 g/mol) were dehydrochlorinated nonregiospecifically using basic alumina, or regiospecifically either via potassium tert-butoxide or in situ quenching of quasiliving PIB. Olefin-terminated PIBs were quantitatively ozonized at −78 °C using hexane/methylene chloride/methanol, 62/31/7 (v/v/v) cosolvents, and an ozone generator, employing pure oxygen as source gas. The primary ozonides were reduced using trimethyl phosphite to yield pure PIB methyl ketone from exo-olefin PIB, and a mixture of PIB methyl ketone and PIB aldehyde from mixed olefin-PIB. PIB methyl ketone was oxidized to carboxylate via the haloform reaction; titration revealed near-quantitative functionalization, but the reaction was slow. Tetrahalomethane oxidation was identified as a preferred alternative method, and was conducted using either CCl₄ as the reaction solvent, THF as the solvent with CCl₄ in reagent amounts, or hexane as the solvent with a phase-transfer catalyst and CCl₄ in reagent amounts. The system using hexane, with tetra-n-butyl ammonium chloride as phase-transfer catalyst, showed complete conversion in ∼ 4 h. PIB carboxylic acid was recovered by acidification and isolation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3229–3240, 2008     

Variational principles in hot atom chemistry

General variational principle are established from Boltzmann's equation for the rate constant of steady-state reactions of hot atoms with a reservoir of molecules, offering an alternative computational method to the theories of Keizer and Shizgal.     

Fourier transform infrared/attenuated total reflectance analysis of water diffusion in poly[styrene‐b‐isobutylene‐ b‐styrene] block copolymer membranes

A Fourier transform infrared/attenuated total reflectance technique was used to study the diffusion of water through poly(styrene‐b‐isobutylene‐b‐styrene) block copolymers (BCPs), as well as sulfonated (H⁺) and Na⁺‐sulfonated ionomer versions. Diffusion data were collected and interpreted for these membranes versus polystyrene block composition, degree of sulfonation, Na⁺ ion content in the ionomers, and the effect of initially dry versus prehydrated conditions. An “early time” diffusion coefficient, D, decreased with increasing percent polystyrene for a series of unmodified BCPs. D decreased with increasing degree of sulfonation, and with increasing ion content for the Na⁺‐exchanged samples and this was interpreted in terms of diffusion limitations caused by a strong tendency for ion hydration. The method also yielded information relating to the time evolution of water structure from the standpoint of degree of intermolecular hydrogen bonding. Membrane prehydration causes profound increases in D for both the unmodified BCP and sulfonated samples, as in plasticization. The simultaneous acquisition of information relating to interactions between water molecules and interactions of water molecules with functional groups on the host polymer matrix offers more information than conventional diffusion measurement techniques that simply count transported molecules. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 764–776, 2005     

Simulation and Analysis of a New Mobility Model for Mobile Communication Networks

The traffic generation models, which describe how the clients use the network services, as well as the mobility models, which describe how clients move within the service area covered by the network, are essential tools for QoS analysis in these environments. In this paper we present the simulation of a new mobility model implemented for the analysis of QoS parameters of a mobile network, such as channel occupation time, handoff and new call blocking probabilities.     

Electroanalytical Determination of N‐Nitrosamines in Aqueous Solution Using a Boron‐Doped Diamond Electrode

The electrochemical methods cyclic and square‐wave voltammetry were applied to develop an electroanalytical procedure for the determination of N‐nitrosamines (N‐nitrosopyrrolidine, N‐nitrosopiperidine and N‐nitrosodiethylamine) in aqueous solutions. Cyclic voltammetry was used to evaluate the electrochemical behaviors of N‐nitrosamines on boron‐doped diamond electrodes. It was observed an irreversible electrooxidation peak located in approximately 1.8 V (vs. Ag/AgCl) for both N‐nitrosamines. The optimal electrochemical response was obtained using the following square‐wave voltammetry parameters: f=250 Hz, E_sw=50 mV and E_s=2 mV using a Britton–Robinson buffer solution as electrolyte (pH 2). The detection and quantification limits determined for total N‐nitrosamines were 6.0×10^?8 and 2.0×10^?7 mol L^?1, respectively.     

Simultaneous voltammetric detection of ascorbic acid, dopamine and uric acid using a pyrolytic graphite electrode modified into dopamine solution

Pyrolytic graphite electrodes (PGE) were modified into dopamine solutions using phosphate buffer solutions, pH 10 and 6.5, as supporting electrolyte. The modification process involved a previous anodization of the working electrode at +1.5 V into 0.1 mol L⁻¹ NaOH followed by other anodization step, in the same experimental conditions, into dopamine (DA) solutions. pH of the supporting electrolyte performed an important role in the production of a superficial melanin polymeric film, which permitted the simultaneous detection of ascorbic acid (AA), (DA) and uric acid (UA), ΔE_AA-DA = 222 mV; ΔE_AA-UA = 360 mV and ΔE_DA-UA = 138 mV, avoiding the superficial poisoning effects. The calculated detection limits were: 1.4 × 10⁻⁶ mol L⁻¹ for uric acid, 1.3 × 10⁻⁵ mol L⁻¹ for ascorbic acid and 1.1 × 10⁻⁷ mol L⁻¹ for dopamine, with sensitivities of (7.7 ± 0.5), (0.061 ± 0.001) and (9.5 ± 0.05) A mol⁻¹ cm⁻², respectively, with no mutual interference. Uric acid was determined in urine, blood and serum human samples after dilution in phosphate buffer and no additional sample pre-treatment was necessary. The concentration of uric acid in urine was higher than the values found in blood and serum and the recovery tests (92-102%) indicated that no matrix effects were observed.     

A review of the determination of persistent organic pollutants for environmental forensics investigations

The field of environmental forensics emerged in the 1980s as a consequence of legislative frameworks enacted to enable parties, either states or individuals, to seek compensation with regard to contamination or injury due to damage to the environment. This legal environment requires stringent record keeping and defendable data therefore analysis can sometimes be confined to data to be obtained from certified laboratories using a standard accredited analytical method. Many of these methods were developed to target specific compounds for risk assessment purposes and not for environmental forensics applications such as source identification or age dating which often require larger data sets. The determination of persistent organic pollutants (POPs) for environmental forensic applications requires methods that are selective but also cover a wide range of target analytes which can be identified and quantified without bias. POPs are used in a wide variety of applications such as flame retardants, fire suppressants, heat transfer agents, surfactants and pesticides mainly because of their chemical inertness and stability. They also include compounds such as dioxins that can be unintentionally produced from industrial activities. POPs are persistent in the environment, bioaccumulative and/or toxic and therefore require analytical methods that are sensitive enough to meet the low detection limits needed for the protection of the environment and human health. A variety of techniques, procedures and instruments can be used which are well suited for different scenarios. Optimised methods are important to ensure that analytes are quantitatively extracted, matrix coextractables and interferences are removed and instruments are used most effectively and efficiently. This can require deviation from standard methods which can open the data up to further scrutiny in the courtroom. However, when argued effectively and strict QA/QC procedures are followed the development and optimization of methods based on investigation specific scenarios has the potential to generate better quality and more useful data.