Spectrophotometric flow injection determination of total phosphorus in beer using on-line UV/thermal induced digestion

A flow injection system for the automatic determination of total phosphorus in beer is described. The developed manifold uses a two-stage photooxidation/thermal digestion procedure together with oxidizing and hydrolyzing reagents to convert all forms of phosphorus compounds to orthophosphate. Polyphosphates are hydrolyzed by acid and heat, and organo-phosphates are digested by UV-catalyzed peroxodisulfate oxidation. The orthophosphate formed is then spectrophotometrically determined by the phosphomolybdenum blue reaction, using stannous chloride as reducing agent. The results obtained for a set of 19 beer samples (with concentrations from 120 to 735 mg P/L) were in good agreement with the reference method, the maximum relative deviation found being 4.7%. Relative standard deviations for ten consecutive determinations were lower than 1.5%, and a detection limit of 1 mg P/L was achieved.     

Natural radionuclide-free phosphoric acid production

High-uranium phosphate rock from Itataia, Brazil, was milled for wet-process phosphoric acid production using the dihydrate method. Uranium contained in the phosphoric acid was recovered by solvent extraction. The distribution of long-lived natural radionuclides of the ²³⁸U and ²³²Th decay series involved in these operations was evaluated. ²²⁶Ra, ²²⁸Ra and ²¹⁰Pb were found to predominate in the phosphogypsum, while ²²⁸Th, ²³⁰Th and ²³²Th in the uranium-free phosphoric acid. Thorium is removed from the phosphoric acid by solvent extraction to produce a NORM-free phosphoric acid.     

Characterization of Lippia sidoides oil extract-b-cyclodextrin complexes using combined thermoanalytical techniques

Thermoanalytical techniques, being rapid and un-expensive have been used for the investigation of the cyclodextrin inclusion complexes for three decades. The conventional thermoanalytical techniques (TG and DTA/DSC) follow the thermal properties of the uncomplexed compounds. Consequently, the inclusion complex formation as well as the liberation of the entrapped guest cannot be followed. Monitoring the products of the thermal fragmentation of parent cyclodextrin and the included molecule(s), applying TG-MS combined technique provides evidence concerning the inclusion complex formation, and besides, gives selective signal to follow the decomposition of the cyclodextrin inclusion complexes. b-cyclodextrin inclusion complexes of Thymol and Lippia sidoides Cham essential oil extract have been prepared and investigated using conventional and combined (TG-MS) thermoanalytical techniques. The evolved gas analysis proved the inclusion complex formation between the host and guests. By the evaluation of the experimental results the elaboration of the entrapped guests from the cyclodextrin cavity could be followed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermogravimetric and differential scanning calorimetric investigations of manganese–glycine interactions

Thermogravimetric (t.g.) and differential scanning calorimetric (d.s.c.) data have been used to study metal–amino acid interactions in adducts of general formula MnCl₂ · ngly (gly = glycine, n = 0.7, 2.0, 4.0 and 5.0). All the prepared adducts exhibit only a one step mass loss associated with the release of glycine molecules, except for the 0.7gly adduct, which exhibits two glycine mass loss steps. From d.s.c. data, the enthalpy values associated with the glycine mass loss can be calculated: MnCl₂ · 0.7gly = 409 and 399 kJ mol^–1, MnCl₂ · 2.0gly = 216 kJ mol^–1, MnCl₂ · 4.0gly = 326 kJ mol^–1 and MnCl₂ · 5.0gly = 423 kJ mol^–1, respectively. The enthalpy associated with the ligand loss, plotted as function of the number of ligands for the n = 2.0, 4.0 and 5.0 adducts, gave a linear correlation, fitting the equation: H (ligand loss)/kJ mol^–1 = 67 × (number of ligands, n) + 76. A similar result was achieved when the enthalpy associated with the ligand loss was plotted as a function of the _a(COO^–) bands associated with the coordination through the carboxylate group, 1571, 1575 and 1577 cm^–1, respectively, for the n = 2.0, 4.0 and 5.0 adducts, giving the equation H (ligand loss) /kJ mol^–1 = 33.5 × _a(COO^–) /cm^–1 – 52418.5. This simple equation provides evidence for the enthalpy associated with the ligand loss being very closely related to the electronic density associated with the metal–amino acid bonds.     

Automatic flow procedure for the determination of ethanol in wine exploiting multicommutation and enzymatic reaction with detection by chemiluminescence

An automatic procedure for the determination of ethanol in wines using a flow system based on multicommutation and enzymatic reaction is described. Alcohol oxidase was immobilized on aminopropyl glass beads and packed in an acrylic column. The peroxide due to enzymatic reaction with ethanol reacted with luminol and generated the chemiluminescence radiation that was monitored by using a laboratory-made detector based on photodiodes. The system manifold comprised a set of 3-way solenoid valves controlled by a microcomputer furnished with electronic interfaces, which ran on software written in Quick BASIC 4.5 to provide facilities to perform on-line sample dilution, reagent addition, and data acquisition. After system parameters optimization, ethanol samples were processed without prior pretreatment. The following suitable features were achieved: linear response ranging from 2.5 to 25% (v/v) ethanol, relative standard deviation of 1.8% (n = 10), detection limit of 0.3% (v/v) ethanol, sampling rate of 23 determinations per hour, and low reagent consumption of 0.23 mg luminol and 7 mg hexacyanoferrate (III) per determination. When the results were compared with those obtained using the AOAC Official Method, no significant difference at the 90% confidence level was observed.     

2‐{[(4‐Methylphenyl)sulfonyl]amino}phenyl 4‐methylbenzenesulfonate

The title compound, C₂₀H₁₉NO₅S₂, crystallizes as an almost 2:1 mixture of two molecular orientations (described as Orient‐A and Orient‐B). The consequences of these two orientations is the formation of three types of N—H...O hydrogen‐bonded dimers in which the (Orient‐A + Orient‐A) dimers are likely to be the most stable, while the mixed (Orient‐A + Orient‐B) dimers are more frequent. Extra interactions in the form of C—H...O and C—H...π interactions act to further stabilize these dimers and probably allow the less energetically favourable (Orient‐A + Orient‐B) and (Orient‐B + Orient‐B) hydrogen‐bonded dimers to exist by preventing their conversion to (Orient‐A + Orient‐A)‐only hydrogen‐bonded dimers during the crystal‐growth process.     

Synthesis,characterization and a thermogravimetric study of copper,cobalt and tin mono- and bis-adducts with ethyleneurea,ethylenethiourea and propyleneurea

This paper describes the synthesis, characterization and a thermogravimetric (t.g.) study of 11 adducts of general formula MCl₂·nL (M = Cu, Co and Sn; n = 1 and 2 for Sn, and 2 for Cu and Co; L = ethyleneurea eu, ethylenethiourea etu, and propyleneurea pu). The i.r. results shows that the eu and pu adducts are coordinated through oxygen, whereas for etu nitrogen is the coordination site. The (C=O) or (C=S) trend is: Cu > Co > Sn. The t.g. curves show that the adducts release ligand molecules in a single mass loss step. As regards considering adducts with the same stoichiometry, the observed thermal stability trend is: etu > pu > eu.     

Reaction of bis(phosphine)(hydrotris(3,5-dimethylpyrazolyl)borato)rhodium(I) with phenylacetylene,p-nitrobenzaldehyde,and triphenyltin hydride: structures of [Rh(Tp)(PPh(3))(2)], [Rh(Tp)(H)(C(2)Ph)(P(4-C(6)H(4)F)(3))], [Rh(Tp)(H)(COC(6)H(4)-4-NO(2))(PPh(3))], and [Rh(Tp)(H)(SnPh(3))(PPh(3))

The complexes [Rh(Tp)(PPh(3))(2)] (1a) and [Rh(Tp)(P(4-C(6)H(4)F)(3))(2)] (1b) combine with PhC(2)H, 4-NO(2)-C(6)H(4)CHO and Ph(3)SnH to give [Rh(Tp)(H)(C(2)Ph)(PR(3))] (R = Ph, 2a; R = 4-C(6)H(4)F, 2b), [Rh(Tp)(H)(COC(6)H(4)-4-NO(2))(PR(3))] (R = Ph, 3a), and [Rh(Tp)(H)(SnPh(3))(PR(3))] (R = Ph, 4a; R = 4-C(6)H(4)F, 4b) in moderate to good yield. Complexes 1a, 2b, 3a, and 4a have been structurally characterized. In 1a the Tp ligand is bidentate, in 2b, 3a, and 4a it is tridentate. Crystal data for 1a: space group P2(1)/c; a = 11.9664(19), b = 21.355(3), c = 20.685(3) A; beta = 112.576(7) degrees; V = 4880.8(12) A(3); Z = 4; R = 0.0441. Data for 2b: space group P(-)1; a = 10.130(3), b = 12.869(4), c = 17.038(5) A; alpha = 78.641(6), beta = 76.040(5), gamma = 81.210(6) degrees; V = 2100.3(11) A(3); Z = 2; R = 0.0493. Data for 3a: space group P(-)1; a = 10.0073(11), b = 10.5116(12), c = 19.874(2) A; alpha = 83.728(2), beta = 88.759(2), gamma = 65.756(2) degrees; V =1894.2(4) A(3); Z = 2; R = 0.0253. Data for 4a: space group P2(1)/c; a = 15.545(2), b = 18.110(2), c = 17.810(2) A; beta = 95.094(3) degrees; V = 4994.1(10) A(3); Z = 4; R = 0.0256. NMR data ((1)H, (31)P, (103)Rh, (119)Sn) are also reported.     

Determination of trace elements in tree rings ofPinus by neutron activation analysis

The elemental composition of pine trees as a function of age was achieved by the tree-ring method. By using instrumental neutron activation analysis, trace elements were determined in individual rings ofPinus elliottii var.elliottii of 32, 14 and 9 years, from an implanted forest ofPinus sp., Buri, São Paulo, far away from industrial pollution. Different components of the system such as needles, pith, bark, soil and litter were also analyzed for 18 elements (As, Br, Ce, Co, Cs, Eu, Fe, Hf, K, La, Mn, Na, Rb, Sc, Sm, Yb, Zn, and Zr). Al, B, Ba, Ca, Fe, K, Mg, and P concentrations were determined by atomic absorption and/or emission spectrometry (AAS; ICP-AES). Some elements have showed similar radial distribution of the concentration for the three ages. Abrupt concentration changes in the pith and ring-bark boundary corresponding to the first and last growth rings were observed.     

Counterions in poly(allylamine hydrochloride) and poly(styrene sulfonate) layer-by-layer films

The amount of counterions in layer-by-layer (LBL) films of poly(allylamine hydrochloride) (PAH) and poly(styrene sulfonate) (PSS) has been determined with X-ray photoelectron spectroscopy (XPS) for films prepared from solutions with various NaCl concentrations. Sodium and chloride counterions are present in LBL films produced from salt solutions, which are located at the surface and in the bulk of the films. The percentage of bulk counterions increases with the ionic strength of the polyelectrolyte before reaching a constant value. The bulk sodium/sulfur percentage ratios tend to 0.8 for samples washed with pure water and for samples washed with NaCl aqueous solutions, while the bulk chlorine/nitrogen percentage ratios tend to 0.5 for the same samples. The ratio between the percentages of polyelectrolyte ionic groups lies close to unity for all samples, indicating that counterions do not contribute to charge compensation in the polyelectrolyte during the adsorption process. The presence of counterions in LBL films is explained by Manning condensation near the polyelectrolyte ionic groups, leading to inter-polyelectrolyte ionic bondings via ionic networks. It is believed that condensation leads to the formation of NaCl crystallites in these LBL films, which was confirmed by X-ray diffraction measurements.